Capacitor (Charging and Discharging) Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-PLE-12379
The Capacitor (Charging and Discharging) set (SKU SCL-PLE-12379) is a capacitor charging and discharging kit for studying RC circuits in school and college physics. It includes a 0-20 V DC, 1 A power supply, a multimeter, a 1000 microfarad electrolytic capacitor, 10 k and 100 k resistors, a circuit board and connecting leads. Students charge the capacitor through a resistor and follow the voltage as it rises and falls. JaincoLab supplies it for electricity practicals.
Specifications
The set consists of a 0-20 V DC 1 A power supply, a multimeter, 10 k and 100 k resistors, a 1000 microfarad electrolytic capacitor, a circuit (outlet) board and six pairs of red and black connecting leads.
| Product | Capacitor (Charging and Discharging) |
| SKU | SCL-PLE-12379 |
| Power supply | 0-20 V DC, 1 A |
| Meter | Multimeter |
| Resistors | 10 k; 100 k |
| Capacitor | Electrolytic, 1000 microfarad |
| Board | Circuit (outlet) board |
| Leads | 6 pairs, red and black |
Applications of the capacitor charging and discharging kit
The kit is used to observe how the voltage across a capacitor changes with time when it charges or discharges through a resistor, and to relate the rate of change to the time constant RC.
- Recording capacitor voltage against time during charging
- Recording capacitor voltage against time during discharging
- Comparing charging times through the 10 k and 100 k resistors (nominal RC values of 10 s and 100 s with the 1000 microfarad capacitor)
- Plotting exponential charge and discharge curves from class readings
- RC circuit practicals in senior secondary and B.Sc physics
Scope of supply and ordering
The listing covers the power supply, multimeter, 10 k and 100 k resistors, 1000 microfarad capacitor, circuit board and six pairs of leads. A stopwatch, the demonstration table and quantities are confirmed on the quotation.
Frequently asked questions
What capacitor and resistors are included?
A 1000 microfarad electrolytic capacitor and resistors of 10 k and 100 k.
What power supply is supplied?
A 0-20 V DC power supply rated at 1 A.
How is the voltage measured?
With the multimeter supplied in the set.
Related products
- Capacitor Study Kit
- Capacitance and Permittivity Kit
- Digital Multimeter Model
- DC Regulated Power Supply Single Output
Browse the general physics lab equipment range, or the full catalogue from JaincoLab, a physics lab equipment manufacturer in India.
Request a quote
To order the capacitor charging and discharging set, send the number of sets and the delivery destination through the JaincoLab contact page or email [email protected]. Institutions and contractors buying under a tender can also reach us via the tenders page.
