Shell and Tube Heat Exchanger Manufacturer,Supplier and Exporter in India
Product Code : JA-HTLE-7380
The Shell and Tube Heat Exchanger (SKU JA-HTLE-7380) is a two-pass teaching unit in which hot water flows through copper tubes to one end of a stainless steel shell and returns through the remaining tubes, while cold water passes over the tubes in the shell. Baffles guide the cold stream, rotameters measure both flows and valves set them. This shell and tube heat exchanger trainer draws hot water from a heated tank with digital temperature control through a magnetic-drive pump.
Specifications
The shell and tube heat exchanger is specified by its two-pass layout, SS shell with baffled copper tubes, rotameters for hot and cold water, a magnetic-drive pump and a heated tank with digital controller, and needs a 220 V, 4 kW supply, 20 litres per minute of water and 1.5 x 0.75 m of floor space.
| Product | Shell and Tube Heat Exchanger |
| SKU | JA-HTLE-7380 |
| Type | Two-pass shell and tube |
| Shell | Fabricated stainless steel |
| Tubes | Copper, with baffles on the outer side |
| Flow measurement | Rotameters for hot and cold water |
| Flow control | Valves for hot and cold water |
| Hot water circuit | Recycle tank with heaters and digital temperature controller; magnetic-drive pump |
| Electricity | 1 phase, 220 V AC, 4 kW |
| Water | About 20 litres per minute, and drain |
| Floor area | 1.5 m x 0.75 m |
Experiments with the shell and tube heat exchanger
The trainer is used to measure heat exchanger performance at different hot and cold water flow rates, from the four terminal temperatures and the two flow readings.
- Log mean temperature difference (LMTD) at various flow rates
- Overall heat transfer coefficient
- Heat transfer rate and energy balance
- Heat exchanger practicals in mechanical and chemical engineering
Scope of supply and ordering
The listing covers the Shell and Tube Heat Exchanger with shell and tubes, rotameters, valves, pump, heated tank and temperature controller. The user provides the water supply, drain and electrical connection.
Frequently asked questions
How many passes does it have?
Two: hot water goes to one end of the shell through some tubes and returns through the remaining tubes.
What utilities are needed?
A 220 V, 4 kW single-phase supply, about 20 litres per minute of water with a drain, and 1.5 x 0.75 m of floor space.
How is the hot water supplied?
From a recycle tank with heaters and a digital temperature controller, through a magnetic-drive pump.
Related products
- Tubular Heat Exchanger
- Dropwise and Filmwise Condensation Apparatus
- Heat Transfer In Forced Convection
- Unsteady State Heat Transfer Unit
See the complete heat transfer lab equipment range from JaincoLab for conduction, convection, radiation and heat exchangers.
Request a quote
For a quotation on the Shell and Tube Heat Exchanger, send the quantity, any optional items and the delivery destination through the JaincoLab contact page or email [email protected] with SKU JA-HTLE-7380. For tender or project supply, see our tenders page.
