Continuous Stirred Tank Reactor Manufacturer,Supplier and Exporter in India
Product Code : JA-CR-9130
The Continuous Stirred Tank Reactor (SKU JA-CR-9130) is a chemical reaction engineering set-up for studying a non-catalytic, homogeneous, second-order liquid-phase reaction in a mixed flow reactor at ambient conditions. Two reactants are fed by compressed air from two feed tanks through rotameters with needle valves into a stirred stainless steel reactor of about 2 litres, and samples are taken from the top outlet. This CSTR apparatus is supplied by JaincoLab for chemical engineering reaction engineering laboratories.
Specifications
The CSTR has a stainless steel reactor of approx. 2 litres with an FHP-motor stirrer, 20 litre stainless steel feed tanks, compressed-air feed circulation, two rotameters, a 0-2 kg/cm² pressure regulator and Bourdon gauge with safety valve, an electronic stop watch and SS and PVC piping.
| Product | Continuous Stirred Tank Reactor |
| SKU | JA-CR-9130 |
| Reactor | Stainless steel, approx. 2 litres |
| Stirrer | Stainless steel impeller and shaft, FHP motor |
| Feed tanks | 2, stainless steel, 20 litres |
| Feed circulation | Compressed air |
| Flow measurement | 2 rotameters with needle valves |
| Air line | Pressure regulator 0-2 kg/cm²; Bourdon gauge 0-2 kg/cm²; safety valve |
| Timing | Electronic stop watch |
| Piping | Stainless steel and PVC |
| Utilities | Compressed air 1 HP, 2 CFM; single phase 220 V AC, 0.5 kW; water supply and drain |
Experiments with the CSTR apparatus
Students feed the two reactants at measured flow rates, let the reactor reach steady state and analyse samples from the outlet to follow the reaction and calculate the rate constant.
- Studying the progress of a second-order reaction in a CSTR
- Determining the reaction rate constant
- Effect of residence time on conversion
- Comparing CSTR and plug flow reactor performance
- Chemical reaction engineering practicals in B.Tech/B.E. courses
Scope of supply and ordering
This listing covers the CSTR set-up with reactor and stirrer, feed tanks, rotameters, air-line fittings, stop watch, piping and control panel. Analysis glassware, instruments and chemicals are not included, and the compressor is confirmed on the quotation.
Frequently asked questions
What reaction is the CSTR used for?
A non-catalytic, homogeneous, second-order liquid-phase reaction at ambient conditions.
What is the reactor capacity?
About 2 litres, in stainless steel, with a stirrer.
What utilities are needed?
Compressed air (1 HP, 2 CFM), single phase 220 V AC at 0.5 kW, water and a drain.
Related products
- Isothermal Continuous Stirred Tank Reactor
- Plug Flow Reactor (Coiled Tube Type)
- Isothermal Semi Batch Reactor
- RTD Packed Bed Reactor Apparatus
More chemical engineering and training units are listed in the training workshop labs range from JaincoLab.
Request a quote
Send an enquiry for the Continuous Stirred Tank Reactor (SKU JA-CR-9130) with the quantity and delivery destination using the JaincoLab contact page or by email to [email protected]. Buying under a laboratory tender? Use our tenders page.
