Semi Automatic Polishing Machine Manufacturer,Supplier and Exporter in India
Product Code : JA-ME-7363
The Semi Automatic Polishing Machine (SKU JA-ME-7363), supplied by JaincoLab, grinds, pre-grinds and polishes metallographic specimens with an independent polishing head that holds the specimens against a 250 mm wheel. Changing the grinding or polishing unit lets it cover every preparation step, and a pneumatic-assisted holder takes several moulds at once. This semi-automatic metallographic polishing machine is aimed at laboratories that want repeatable results.
Specifications
The semi-automatic polishing machine is specified by a 250 mm grinding and polishing wheel, variable speed of 50 to 600 rpm, a loading range of 1 to 200 N and a 1 HP high-torque AC motor, with electronic control and a digital timer. Platen speed options are confirmed on the quotation.
| Product | Semi Automatic Polishing Machine |
| SKU | JA-ME-7363 |
| Wheel diameter | 250 mm; abrasive paper 250 mm |
| Larger discs | 10 in and 12 in also available |
| Polishing head | Independent motor; single pressure specimen loading |
| Loading range | 1 to 200 N |
| Speed | Variable, 50 to 600 rpm |
| Motor | 1 HP high-torque AC |
| Control | Electronic, LC display with digital timer |
| Specimen holder | 10 in aluminium disc holds up to 3 moulds (30/45 mm); pneumatic-assisted holder for 3 to 5 moulds |
| Operating conditions | 10 to 40 °C |
Applications of the semi-automatic metallographic polisher
The machine is used where specimen preparation must be consistent from batch to batch, since the polishing head applies a set load for a set time instead of relying on hand pressure.
- Metallography labs in engineering colleges and research institutes
- Preparing several mounted specimens at once
- Industrial quality control of steels and alloys
- Grinding, pre-grinding and polishing on one machine
Scope of supply and ordering
The listing covers the Semi Automatic Polishing Machine with polishing head, 250 mm wheel and specimen holder. Larger discs and pneumatic multi-mould holders are confirmed on the quotation.
Frequently asked questions
What wheel size does it use?
A 250 mm grinding and polishing wheel; 10 in and 12 in discs are also available.
How many specimens can it hold?
Up to 3 moulds of 30 or 45 mm on the aluminium holder, or 3 to 5 moulds with the pneumatic-assisted holder.
What loading range does the head apply?
1 to 200 N, with single pressure specimen loading.
Related products
- Double Disc Polishing Machine (Floor Model)
- Digital Polishing Machine (Table top)
- Speed Regulated Polishing Machine
- Automatic Mounting Press
Browse the full metallurgical equipment range from JaincoLab for manual and automatic polishers and mounting presses.
Request a quote
To receive a quotation for the Semi Automatic Polishing Machine, send the quantity, the variant you need and the delivery destination through the JaincoLab contact page or email [email protected], quoting SKU JA-ME-7363. Institutions and contractors buying under a tender can also reach us via the tenders page.
