Training Board for DIAC Manufacturer,Supplier and Exporter in India
Product Code : JA-AET-1462
The DIAC training board is used to plot the V-I characteristics of a DIAC and study its break-over voltage, negative resistance region and VBO symmetry. It also shows the DIAC as a saw-tooth waveform generator and a pulse train generator, with a 0-50 V DC regulated supply, a 45 V AC supply and a 65 mm rectangular-dial voltmeter and ammeter built in (SKU JA-AET-1462).
Specifications
The DIAC board is listed with:
| Product | Training Board for DIAC |
| SKU | JA-AET-1462 |
| DC supply | 0-50 V DC at 50 mA, regulated |
| AC supply | 45 V AC at 50 mA, unregulated |
| Voltmeter | DC, 65 mm rectangular dial, 0-50 V |
| Ammeter | DC, 65 mm rectangular dial, switch-selectable 200 mA and 50 mA ranges |
| Device | DIAC |
| Control | Potentiometer |
| Mains | 230 V ±10%, 50 Hz AC; ON/OFF switch, fuse and jewel light |
| Patch cords | 4 mm spring-loaded plugs, stackable from the rear at both ends, 0.5 m |
| Other apparatus required | CRO 20 MHz |
DIAC studies
The listed experiments are:
- V-I characteristics of the DIAC
- Break-over voltage (VBO)
- Negative resistance region
- VBO symmetry and delta V
- DIAC as a saw-tooth waveform generator
- DIAC as a pulse train generator
Scope of supply and ordering
The listing covers the DIAC training board with its built-in meters, patch cords and operating instructions, supplied by JaincoLab.
Frequently asked questions
What DIAC parameters can be studied?
The break-over voltage VBO, the negative resistance region, and VBO symmetry and delta V, from the plotted V-I characteristics.
Which applications are demonstrated?
The DIAC as a saw-tooth waveform generator and as a pulse train generator.
Are meters included?
Yes. A 0-50 V DC voltmeter and a DC ammeter with 200 mA and 50 mA ranges, both with 65 mm rectangular dials.
Related products
- Training Board for Triac
- Silicon Controlled Rectifier
- Lamp Dimmer Using Diac and Triac
- AC Regulators Using Triac Anti Parallel Thyristor
Other products in this group are in the analog electronics trainer range.
Request a quote
Send your requirement for the Training Board for DIAC to [email protected] or use the contact page. Buying under a laboratory tender? Use our tenders page.
