Firing Circuit Using OP AMPS And Gates Manufacturer,Supplier and Exporter in India
Product Code : JA-PET-1435
The firing circuit using op-amps and gates is a power electronics trainer for studying how firing pulses for a single-phase converter are generated with operational amplifiers and logic gates. It carries eight op-amp ICs, a quad 2-input AND gate IC, two NPN transistors, two 1:1 pulse transformers and three potentiometers, powered by 6 V AC and ±12 V DC regulated supplies (SKU JA-PET-1435).
Specifications
Listed parts and ratings of the op-amp firing board:
| Product | Firing Circuit Using OP AMPS And Gates |
| SKU | JA-PET-1435 |
| AC supply | 6 V AC at 100 mA |
| DC supply | ±12 V DC at 100 mA, fixed regulated |
| ICs | Eight op-amp ICs; quad 2-input AND gate IC |
| Transistors | Two NPN |
| Pulse transformers | Two, 1:1 |
| Controls | Three potentiometers |
| Mains | 230 V ±10%, 50 Hz AC; ON/OFF switch, fuse and jewel light |
| Patch cords | 4 mm stackable spring-loaded plugs, 0.5 m |
| Weight | 4 kg approx. |
| Dimensions | W 412 x H 150 x D 310 mm |
| Other apparatus required | Dual trace CRO 20 MHz (unearthed) |
| Optional load unit | 50 W isolation transformer, 40 W lamp and 400 V, 4 A SCR, with mains ON/OFF switch, fuse and jewel light |
Scope of supply and ordering
The listing covers the op-amp and gate firing circuit board with patch cords and operating instructions, supplied by JaincoLab; an optional load unit with an SCR, a lamp and an isolation transformer can be added.
Frequently asked questions
What is studied on this firing circuit board?
The firing circuit for a single-phase converter built with op-amps and gates, which is its listed experiment.
How many op-amps does the board use?
Eight op-amp ICs, together with a quad 2-input AND gate IC and two NPN transistors.
What is needed besides the board?
A dual trace 20 MHz oscilloscope (unearthed); an optional load unit with a 50 W isolation transformer, a 40 W lamp and a 400 V, 4 A SCR is listed.
Related products
- Firing Circuit Using Ramp Comparator Scheme
- Firing Circuit Using Cosine Wave Scheme
- Single Phase Half Controlled Symmetrical
- SCR Triggering Circuit
Related items are grouped in the JaincoLab power electronics trainers range.
Request a quote
Quotations for the Firing Circuit Using OP AMPS And Gates are prepared on request through the JaincoLab contact page. Institutions and contractors buying under a tender can also reach us via the tenders page.
