Manual Batch Reaction Pilot Plant Manufacturer,Supplier and Exporter in India
Product Code : JA-CELE-9511
The Manual Batch Reaction Pilot Plant (SKU JA-CELE-9511) is a jacketed batch reactor with an attached distillation column for reactions in which a product or by-product is removed as it forms. A 10 litre jacketed reactor with a stirrer at 0 to 400 rpm and a 2.5 kW heater feeds a 600 mm distillation column, a reflux head with solenoid valve and an azeotropic separator. Reagents are dosed from two graduated tanks. This batch reaction pilot plant is supplied by JaincoLab for chemical engineering laboratories.
Specifications
The plant has a 10 litre jacketed reactor, a geared stirrer motor with tachogenerator (0-400 rpm), a 2.5 kW heater with thyristor control, a 600 mm distillation column, an azeotropic separator, a conductivity transmitter, two thermocouples and a vacuum pump connection with check valve and 1 to 0 bar gauge.
| Product | Manual Batch Reaction Pilot Plant |
| SKU | JA-CELE-9511 |
| Reactor | Jacketed, 10 litres, with stirrer |
| Stirrer drive | Geared motor with tachogenerator, 0-400 rpm |
| Heating | Electric heater 2.5 kW, thyristor power control |
| Distillation | Column 600 mm; reflux head with solenoid valve; 2 programmable reflux timers; azeotropic separator |
| Reagent dosing | 2 graduated reagent tanks |
| Condensate collection | 2 tanks, 5 litres each |
| Measurement | Microprocessor conductivity transmitter; 2 thermocouples in stainless steel sleeves; 2 electronic temperature indicators |
| Vacuum | Vacuum pump connection circuit with check valve; gauge 1 to 0 bar |
| Pipework and controls | Stainless steel pipework and valves; electrical control panel; emergency stop |
Experiments with the batch reaction pilot plant
Students run a batch reaction in the jacketed vessel while distilling off a product or water through the column and azeotropic separator, following the reaction by conductivity and temperature.
- Batch reaction kinetics with conductivity monitoring
- Reactive distillation with removal of a volatile product
- Azeotropic removal of water during esterification-type reactions
- Effect of stirring speed and heating power on reaction rate
- Reaction engineering and process practicals
Scope of supply and ordering
This listing covers the batch reaction pilot plant with jacketed reactor, stirrer drive, heater, column, reflux head, azeotropic separator, tanks, instruments and control panel. The vacuum pump, cooling water and power supply are confirmed on the quotation.
The Manual Batch Reaction Pilot Plant can be ordered for a single laboratory or as part of a complete laboratory package for a college or training programme.
Frequently asked questions
What is the reactor capacity?
10 litres, jacketed, with a stirrer at 0 to 400 rpm.
Can products be distilled during the reaction?
Yes, through the 600 mm distillation column, reflux head and azeotropic separator.
How is the reaction followed?
With a microprocessor conductivity transmitter and two thermocouples.
Related products
- Manual Stirred Continuous Reaction Pilot Plant With Reactors In Series
- Multifunctional Reaction Plant
- Chemical Reactors Bench
- Three Phase Catalytic Converter
For a complete laboratory, see the training workshop labs range, which covers chemical engineering, data acquisition and applied machines equipment.
Request a quote
To get a quotation for the Manual Batch Reaction Pilot Plant, send SKU JA-CELE-9511, the quantity and the delivery destination through the JaincoLab contact page or email [email protected]. Institutions and contractors buying under a tender can also reach us via the tenders page.
