You have searched for products starting with "K"

Note: The polyethylene Kipps apparatus is a three-part gas generator used in school and college chemistry laboratories to produce hydrogen sulphide for salt analysis.

Note: Life-size functional knee joint on a stand with flexible artificial ligaments; 12.5 x 12.5 x 32 cm.

Note: Life-size knee joint model on a stand with flexible ligaments. For teaching use only.

Note: Knee osteoarthritis teaching model, supplied by JaincoLab. For teaching use only.

Note: Three scaled-down knee models including an implant, on a stand, supplied by JaincoLab. For teaching use only.

Note: Dial kitchen balance with removable pan, supplied by JaincoLab. Capacity and graduation are confirmed on the quotation.

Note: Plastic dial kitchen balance in 1000 g to 5000 g capacities.

Note: Kjeldahl digestion unit for nitrogen estimation, 6 tests; fume duct, hangers and energy regulator are options.

Note: Combined Kjeldahl digestion and distillation stand for 6 tests; fume duct and energy regulator are options, glassware not included.

Note: Works on 220 V AC, 50 Hz single phase. Listed as a 3-test unit with 3 energy regulators or a 6-test unit with 6 energy regulators.

Note: Incinerator for on-site disposal of kitchen waste, available for electric, oil or gas firing.

Note: Laminated 50 x 75 cm wall chart on the King Mayadas story, for pre-primary and primary classes.

Note: 70 x 100 cm wall chart on the map of Karnataka with plastic rollers, for school geography and social studies classes.

Note: 70 x 100 cm wall chart on the map of Kerala with plastic rollers, for school geography and social studies classes.

Note: Runs on 220/230 V AC. Supplied with condenser rack, fume duct and hangers; glass parts and clamps are available as an option.

Note: Motor-driven kinetic theory model with metal spheres in a tube, for teaching gas behaviour.

Note: Knife switch on insulated base for opening and closing circuits in electricity practicals.

Note: Kjeldahl digestion unit for 250 and 500 ml flasks with individual switches and a common energy controller, 220 V AC.

Note: Recording instrument giving a graph of position over time for pharmacology and physiology practicals; the model is confirmed on the quotation.

Note: Teaching model depicting kwashiorkor (protein-energy malnutrition) in children for child nutrition and malnutrition classes.

Note: Teaching model depicting koilonychia (spoon-shaped nails) for nutritional deficiency and clinical signs classes.

Note: Kaleidoscope with triangular mirrors, steel outer tube and coloured beads for pattern formation.

Note: Polyethylene Kipp's apparatus with thistle funnel, gas dome, PTFE-plug stopcock and capped residue outlet.

Note: Distillation unit for the Kjeldahl method; specifications confirmed on the quotation.

Note: Electrically heated Kjeldahl digestion and distillation unit for 3 or 6 tests.

Note: T-type reflex hammer for tendon reflex demonstrations in physiology and nursing training.

Note: Training model of a kettle type reboiler, supplied by JaincoLab; specification confirmed on the quotation.

Note: Three models on one base: kidney section 3x, glomerulus 700x and nephron 120x, with numbered key card.

Note: Koch's four postulates for linking a microorganism to a disease for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Capacity 5 kg, graduation 25 g; 16 x 14 x 12 cm excluding pan; 800 g; removable scoop pan.

Note: Combined Kjeldahl digestion and distillation unit, mantle heating, 200 W per position, on an MS stand.

Note: Aluminium dry block digester for Kjeldahl digestion, up to 450 C +/-2 C; tubes and racks optional.

Note: Reciprocating shaker for Kahn racks, bottles or flasks, electronic speed control up to 250 RPM.

Note: A3 laminated grass identification key from the Gatekeeper Guides series, supplied by JaincoLab.

Note: A3 laminated key to fruit and seed dispersal, supplied by JaincoLab.

Note: A3 laminated key to land invertebrates for fieldwork, supplied by JaincoLab.

Note: A3 laminated tree and shrub identification key, supplied by JaincoLab.

Note: A3 laminated key to water invertebrates for pond and stream work, supplied by JaincoLab.

Note: A3 laminated key to grassland wild flowers, supplied by JaincoLab.

Note: Supplied with steel balls and float. Needs a 4-12 V DC supply.

Note: Capacity 1000 ml. Reagents not included.

Note: Multi-technique consumer chemistry kit themed on kitchen materials, with materials for 15 groups; juice or soda samples are not provided.

Note: Right kidney section model at three times full size, made by JaincoLab.

Note: Kidney section model with nephrons at 120x and glomerulus at 700x, made by JaincoLab.

Note: Two-part kidney and adrenal gland model with removable front half, made by JaincoLab.

Note: Model kit for the molecules met in lower-secondary (Key Stage 3 equivalent) science; the piece count is confirmed on the quotation.

Note: Plastic base with brass poles and blades; switches two lines in one movement.

Note: Plastic base with brass poles and blade; selects one of two circuit paths.

Note: Plastic left kidney about 2x life size in longitudinal section, supplied by JaincoLab. For teaching use only.

Note: PVC kidney 3 times life size on a board with an identification manual, supplied by JaincoLab. For teaching use only.

Note: PVC knee joint model with meniscus, patella and ligaments, supplied by JaincoLab. For teaching use only.

Note: A kiln drying oven is a heated drying chamber used to reduce the moisture content of timber or other materials under controlled temperature and air circulation.

Note: The kitchen sink is a single-bowl sink for plumbing installation practice, with a 355 x 405 mm (14 x 16 inch) bowl 200 mm (8 inch) deep, 1.0 mm material thickness and 460 x 812 mm (18 x 32 inch) overall size.

Note: The knurling tool holder carries high-speed steel knurls for knurling turned work on the lathe.

Note: Kaplan turbine test rig, 5 HP, with orifice meter and rope brake dynamometer.

Note: Keyhole / compass saw with triple-ground teeth and bi-material handle; blade length on the quotation; supplied by JaincoLab.

Note: Only a signal generator is required to run it.

Note: Each ball is 4 cm in diameter. The number of balls and the material are confirmed on the quotation.

Note: Stand, 90 mm ring and 600 ml beaker for plant respiration demonstration.

Note: Flasks, thermometer, baryta water and pump for germinating-seed experiments.

Note: Stand, clamp, beaker, dye and glass tube for a transpiration demonstration.

Note: Root pressure demonstration kit; full contents confirmed on quotation.

Note: Aquatic plant gas exchange kit; contents confirmed on quotation.

Note: Mineral salts and two 250 ml flasks for a plant absorption demonstration.

Note: Lung model, pipette and lime water for breathing experiments.

Note: Filters, pump and comparison sheet for a smoking effects demonstration.

Note: Glassware and reagents for starch and protein digestion experiments.

Note: Plastic slide box with 25 slots.

Note: 3-4x magnified kidney model with separable parts.

Note: White porcelain crucible with lid, 30 ml.

Note: Set of two laboratory carts with tracks, springs and elastic cords for motion experiments.

Note: Heat and thermometer kit with thermometers, cups, tubes, candles and holders.

Note: Two-cart motion set with tracks, springs and elastic cords.

Note: Heat and temperature kit with thermometer scales, cups, tubes and candles.

Note: Left kidney 3D model on stand, 26 x 18 x 33 cm, 790 g.

Note: Box of white paper laboratory wipers.

Note: Two-sided knee jerk hammer with TPR heads and removable brush, for training use.

Note: Two low-friction carts on ball-bearing wheels with two 1.5 m tracks. Timers and masses are confirmed on the quotation.

Note: Includes four 100 ml cups and five candles with metal holders. Thermometer scales are as listed.

Note: Slide preparation instruments with hand microtome, tweezers, scalpels and needles.

Note: Kit for CO2 and heat from germinating seeds, with flasks, thermometer, baryta water and pump.

Note: Tripod, 600 ml beaker, colouring liquid, glass tube and clamp.

Note: Glass mirror strips 6 x 2 in for kaleidoscope construction, supplied by JaincoLab.