You have searched for products starting with "T"

Note: The Twin Rack holds microcentrifuge tubes of two sizes: one side has 108 holes for 0.5 ml tubes and the other 108 holes for 1.5 ml tubes.

Note: The Test Tube with Screw Cap is a 16 x 100 mm polypropylene tube for coagulation work, bacteriology and similar laboratory tasks.

Note: The polypropylene test tube cap is a transparent cap that closes 25 mm diameter test tubes and protects their contents.

Note: The 6 place test tube stand is an autoclavable rack for holding test tubes upright during school and college practicals.

Note: This test tube stand holds six tubes on a top plate with matching wells below, and has six upright pins for drying tubes after washing.

Note: The 3 tier test tube rack holds tubes in three plates, one above the other, so their contents stay visible and tubes slide in and out easily.

Note: This three tier test tube stand keeps tubes in view through stacked plates and makes them easy to insert and lift out.

Note: The test tube peg rack holds washed tubes upside down on pegs so they drain and dry with little chance of airborne contaminants settling inside.

Note: The water bath test tube rack is a submersible polypropylene rack that replaces wire racks in water baths and on the bench.

Note: The one piece test tube rack is a moulded three-tier grid rack that holds 36 tubes without any parts to assemble.

Note: Transparent lung model showing all bronchopulmonary segments with a PVC bronchial tree.

Note: Dental care model of gums, teeth, tongue and palate supplied with a brush.

Note: 85 cm transparent skeleton model; specification confirmed on the quotation.

Note: Tissue culture microscope with LWD objectives, oversize stage and Koehler halogen illumination.

Note: Trinocular research microscope with camera port, DIN 4x to 100x oil, halogen.

Note: Trinocular stereo zoom microscope, 7x to 45x, camera port, halogen light.

Note: Trinocular inverted tissue culture microscope with long working distance objectives, coaxial mechanical stage and halogen Koehler illumination.

Note: Trinocular metallurgical microscope with vertical halogen illuminator, low coaxial stage and P7x eyepiece for microphotography.

Note: Trinocular upright metallurgical microscope with camera port, coaxial focusing and 6 V 20 W halogen vertical illumination.

Note: Toolmakers microscope with eyepiece protractor, 152 x 152 mm ball bearing stage and collimated green-filtered halogen sub-stage light.

Note: Tester for low-power PNP and NPN transistors with socket and gain meter; 220 V, 50 Hz.

Note: Triode valve characteristics apparatus with ECC82, stabilised supplies and three meters.

Note: Tetrode and pentode characteristics apparatus with 6SJ7 valve, two DC supplies and five meters.

Note: Thyratron V-I characteristics apparatus with two regulated DC supplies.

Note: Common base and common emitter characteristics apparatus with PNP and NPN transistors, two DC supplies and four meters.

Note: Thermistor characteristics apparatus with oven, thermometer, 0-1 V supply and two meters.

Note: Triac characteristics apparatus with two DC supplies and three meters.

Note: IC 74193 4-bit up/down counter apparatus with SPDT inputs, 1 Hz clock and LED outputs.

Note: IC 7400 switch debouncer apparatus with one SPDT input switch, two LEDs and measuring sockets.

Note: IC 7400 NAND gate clock pulse apparatus with input switch, output LED and frequency terminal.

Note: Listed in six frequencies from C 256 Hz to C 512 Hz. For educational purposes only; not for tuning instruments.

Note: The three phase half controlled thyristorized bridge converter is a power electronics trainer board for studying line-commutated, half-controlled three-phase rectification in engineering and polytechnic laboratories.

Note: The TRIAC and AC phase control trainer is a power electronics board for studying TRIAC characteristics in all four operating modes (I+, I-, III+ and III-) and their use in AC power control.

Note: The TRIAC AC line switching trainer is a power electronics board for studying the TRIAC as a static switch for AC loads.

Note: The thyristor time delay relay trainer is a power electronics board for studying timed switching with a UJT timer, SCRs and a TRIAC.

Note: The thyristor alarms trainer is a power electronics board for building SCR-based alarm circuits.

Note: This board demonstrates an LDR triggered SCR circuit, in which a light-dependent resistor mounted on the panel fires the SCR.

Note: The triggering circuits for SCR trainer covers the three basic ways of firing an SCR: resistor (R), resistor-capacitor (R-C) and UJT relaxation oscillator triggering.

Note: The three phase full wave rectifier trainer is a power electronics board built around six rectifier diodes fed from a three phase transformer.

Note: The three phase fully controlled bridge converter trainer is a line-commutated six-thyristor bridge with its own triggering circuit.

Note: The T and pi network trainer is a panel for verifying the impedance properties of passive T and pi networks in electronics and network theory practicals.

Note: The two stage RC coupled transistor amplifier trainer is a board with two PNP transistor stages for studying the characteristics of a cascade amplifier.

Note: The diode and zener diode training board is used to plot the forward and reverse bias characteristics of a germanium semiconductor diode and the forward and reverse (breakdown) characteristics of a zener diode.

Note: The transistor training board is used to study and plot transistor input and output characteristics in common emitter, common base and common collector modes.

Note: The TRIAC training board is used to study the gate characteristics of a TRIAC in modes I+, I-, III+ and III-, its terminal characteristics in modes I+ and III+, and its holding current.

Note: The DIAC training board is used to plot the V-I characteristics of a DIAC and study its break-over voltage, negative resistance region and VBO symmetry.

Note: The MOSFET training board is used to determine the drain characteristics of a MOSFET and to use it as a common-source amplifier, measuring its voltage gain.

Note: Transmission line trainer with 100 m of coaxial line (four 25 m cables), a 40 kHz to 4 MHz sine/square generator and impedance matching, for attenuation, impedance, standing wave and fault location studies.

Note: The gates training board is used to study OR, AND and NAND logic gates and verify their truth tables, and to build OR, NOR, NOT, AND and EX-OR functions from universal NAND gates.

Note: The flip-flops training board is used to construct RS (with and without clock), D, J-K, T and master-slave J-K flip-flops from gates and study their characteristics.

Note: Economy tall form borosilicate beakers in 10 capacities from 50 ml to 5000 ml. State capacity and quantity per line.

Note: T bore borosilicate glass stopcocks with PTFE key in 2 mm and 4 mm bore sizes.

Note: T bore borosilicate glass stopcocks with glass key in 2 mm and 4 mm bore sizes.

Note: Tall neutral glass screw neck vials with closure in seven sizes, 0.5 to 8 dram (1.75 to 28.25 ml).

Note: Angled drying tubes with ground-glass cone in B10, B14, B19, B24 and B29 sizes.

Note: Bent air inlet tubes with cone, 150 mm stem, in B14, B19 and B24 sizes.

Note: Straight air inlet tubes with cone, 100 mm stem, in B10, B14, B19, B24 and B29 sizes.

Note: Thermometer pockets: 45 mm stem with B14 cone, and 200 mm stem with B19 cone.

Note: Thermometers with B14 cone in ranges 0-110, 0-200, 0-300 and 0-400 degrees C.

Note: Geared plastic demonstration clock for teaching time to the whole class.

Note: Seven-piece tangram set: five right triangles, one square and one parallelogram.

Note: Plastic teacher geometry set for the blackboard or whiteboard, packed in a plastic case.

Note: Theodolite teaching model with a movable telescope and graduated horizontal and vertical circles.

Note: Kit of assorted colour right-angle triangles with a digital stopwatch for time and work activities.

Note: Set of 4 transparent 18 mm dice, two red and two blue.

Note: Large transparent cube, cuboid, cone and two hemispheres for demonstrating 3D solids.

Note: Kit of five different types of congruent triangles.

Note: Set of 10 plastic number rods in 10 sizes and colours.

Note: Trigonometry board for exploring sine, cosine and tangent in a right triangle.

Note: Rubber stamps for making time-teaching worksheets.

Note: Set of 10 transparent geometrical shapes for mensuration.

Note: Group activity triangle kits for concurrency and classification of triangles.

Note: Forced-air laboratory tray dryer, 50 to 250 °C, in 12-tray and 48-tray sizes.

Note: Laboratory tissue homogeniser with 25, 50 and 100 ml vessels; motor and speed details are confirmed on the quotation.

Note: Triple beam balance, 610 g with 0.1 g readability, up to 2610 g with supplementary masses.

Note: Single-vessel tablet and capsule dissolution tester with microprocessor speed control and thermostatic acrylic bath.

Note: Two-station microprocessor tap density tester with two drop-height methods and automatic density calculations.

Note: Thermostatic tissue flotation bath with black anodised chamber, 225 mm diameter and 70 mm deep.

Note: Compact single-unit station with SS basket rotor, wax bath, 24 tissue capsules and 6 dividers.

Note: N-100 tuning fork with stylus and an electrical, double magnet, single time marker for kymograph time traces.

Note: Three types are listed, student (40 mm tie-on diaphragm), large (75 mm diaphragm) and Marey's (22 mm or 28 mm), all with a stainless steel capillary lever.

Note: Detachable canvas-lined mild steel pan for polishing coated tablets in pharmaceutics practicals.

Note: Motor-driven hammer type tablet making machine for pharmaceutics practicals, with optional 6, 9 and 12 mm punch and die sets.

Note: Motorised hammer type tablet press for pharmacy college practicals, with optional chrome steel punch and die sets.

Note: Hand operated wheel-driven tablet press for tablets up to 100 mg with 9 mm punch and die and eccentric pressure adjustment.

Note: Laminated and full-colour 58 x 90 cm wall chart on the lever and its three classes with plastic rollers, for middle-school science and Class 9 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on the working of the telescope with plastic rollers, for Class 12 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on the working of television with plastic rollers, for middle-school science and Class 12 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on the cell theory with plastic rollers, for Class 9 and Class 11 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on the major soil types of India with plastic rollers, for middle-school and secondary geography.

Note: 70 x 100 cm wall chart on respiratory system, for secondary school biology classes and nursing training.

Note: 70 x 100 cm wall chart on Thomas Alva Edison, for school science classrooms and laboratories.

Note: Laminated wall chart on tobacco and habit-forming drugs with plastic rollers, for school health education classes.

Note: Laminated wall chart on tuberculosis with plastic rollers, for health education classes in schools, colleges and nursing courses.

Note: Laminated wall chart on typhoid with plastic rollers, for health education classes in schools, colleges and nursing courses.

Note: Laminated 50 x 75 cm wall chart on triangular bandages with plastic rollers, for first aid training and school health education classes.

Note: Laminated 50 x 75 cm wall chart on transport of the injured with plastic rollers, for first aid training and school health education classes.

Note: 50 x 75 cm wall chart on tides, for middle and secondary school geography classes.

Note: Colour wall chart on the Tamil alphabet with images beside the letters, for pre-primary and primary classes.

Note: Laminated 70 x 100 cm wall chart on the Telugu alphabet, for pre-primary and primary classes.

Note: Laminated 70 x 100 cm wall chart on the Tamil barakhadi, for pre-primary and primary classes.

Note: Laminated 70 x 100 cm wall chart on the Telugu barakhadi, for pre-primary and primary classes.

Note: 50 x 75 cm wall chart on temples of India, for primary and middle school classes.

Note: Laminated 50 x 75 cm wall chart on the Thirsty Crow story, for pre-primary and primary classes.

Note: Laminated 50 x 75 cm wall chart on the Think before you act story, for pre-primary and primary classes.

Note: Laminated 50 x 75 cm wall chart on the The Great Scholar story, for pre-primary and primary classes.

Note: 50 x 75 cm wall chart on the Revolt of 1857, for school history and social studies classes.

Note: 50 x 75 cm wall chart on three-letter words, for pre-primary and primary English classes.

Note: 50 x 75 cm wall chart on the words these, those and are, for pre-primary and primary English classes.

Note: Laminated 50 x 75 cm wall chart on the NCC oath and aims with plastic rollers, for NCC, army and police training classes.

Note: 70 x 100 cm wall chart on the map of Tamil Nadu with plastic rollers, for school geography and social studies classes.

Note: Laminated 70 x 100 cm wall chart on the map of Telangana, for school geography and social studies classes.

Note: Brass-frame test sieves in all aperture sizes with lid and receiver, made by JaincoLab.

Note: Electronic total station for angle and distance measurement, supplied by JaincoLab.

Note: 3 inch brass-finish Titanic compass, supplied by JaincoLab.

Note: Thread compass from the nautical range, supplied by JaincoLab; details confirmed on the quotation.

Note: Brass and aluminium survey tripod stand, made by JaincoLab.

Note: Virgin plastic counters, 30 mm diameter, 2 mm thick. Pack quantity confirmed on the quotation.

Note: Seven-piece plastic board geometry set for teachers, packed in a plastic case.

Note: Six large transparent solids with wire holes in the cube and cone. Sizes confirmed on the quotation.

Note: Five sets of congruent triangles for group work. Sizes and material confirmed on the quotation.

Note: Plastic rods in 10 sizes and 10 colours. Lengths and quantity confirmed on the quotation.

Note: Right-angle triangles in assorted colours with a digital stopwatch.

Note: Theodolite model with telescope and graduated horizontal and vertical circles.

Note: 26 x 26 cm trigonometry board with geo sticks, connectors, pins and rubber bands.

Note: Forced-air tray drying oven with digital PID control, cross-flow axial fans and adjustable exhaust damper.

Note: Stirred precision water bath with solid state controller and 430 x 240 x 265 mm stainless steel chamber.

Note: The magnetometer and the coil rotate independently of the base, which has levelling screws.

Note: Point E is moved by hand to simulate the engine piston.

Note: Hand-operated tellurium with belt drive. Demonstrates the relative movements of the Sun, Earth and Moon on a large scale.

Note: Single action limits joint B to the line AC; a longer stroke gives double action. One of sixteen board-mounted mechanisms.

Note: Least count 0.01 mm. Scales and verniers in stainless steel.

Note: Two versions: aluminium parts, or open working model with all-brass parts. Both on teak wood bases.

Note: Rust-resistant construction with a comfort grip; available in different sizes and specifications.

Note: Set of 20 rock thin section slides for petrology practicals; supplied by JaincoLab.

Note: Set of 20 mineral thin section slides for mineralogy practicals; supplied by JaincoLab.

Note: Set of 20 rock and mineral thin section slides for geology practicals; supplied by JaincoLab.

Note: Landform model of the transporting river system; size, material and base are confirmed on the quotation.

Note: Plate tectonics model of a transform boundary; size, material and base are confirmed on the quotation.

Note: Rigid PVC 3D wall model of the volcanic system; size is confirmed on the quotation.

Note: Rigid PVC 3D wall model of the Earth's interior; size is confirmed on the quotation.

Note: 60 x 40 cm demonstration time teacher with table stand, 24-hour format.

Note: Handy time teaching aid for 12-hour and 24-hour formats.

Note: Magnetic model proving the mid-point theorem.

Note: 3-part set on drawing a triangle equal in area to a parallelogram.

Note: Magnetic kit for verifying the Pythagoras theorem.

Note: Painted sheet-metal cone and cylinder for the volume relationship activity.

Note: Set of two nesting cylinders for volume activities.

Note: Cotton-head test tube brush, stainless steel handle.

Note: Single-pan triple beam balance, 610 g, to 2610 g with weights.

Note: Momentary tapping key with a nickel-plated brass strip on a Bakelite plate. The circuit changes only while the knob is pressed.

Note: Prepared microscope slide of a chlorenchyma plant tissue section, permanently mounted with a cover slip.

Note: 4-in-1 digital thermo hygrometer clock, -50 to 70°C, min-max memory, 3-channel LCD.

Note: Thermometer, hygrometer and clock in one large display; ranges confirmed on the quotation.

Note: Digital stop clock in analogue-clock styling with easy-read display.

Note: Mounted, labelled diagram of a leaf in transverse section with key.

Note: Battery-powered TDS/conductivity meter with 0-2000 ppm and 0-20 ppt ranges.

Note: Telephone trainer showing the internal structure and working principle of a telephone.

Note: Terrestrial telescope model with three convex lenses.

Note: Borosilicate glass test tubes in several capacities.

Note: Plated steel wire test tube holder with finger grip.

Note: Wooden peg-type test tube holder with spring-wire closing action.

Note: Glass test tube with screw cap for spill-free storage of chemicals.

Note: Third hand magnifier that holds the work so both hands are free.

Note: Three-pin plug top for connecting electrical equipment.

Note: Transilluminator for viewing DNA and RNA bands in agarose gels.

Note: Set of eight aluminium alloy tuning forks, 256 Hz to 512 Hz.

Note: Turbidity meter for ultra-clean and high-turbidity water.

Note: Glass-top tracing light box with tube light.

Note: Trulla pattern stainless steel spatula, 175 mm.

Note: Triangular PTFE stirring bar with Alnico V magnet.

Note: Trapezoidal PTFE stirring bar with rare earth magnet.

Note: Set of four tuning forks.

Note: Microscope mounted on two rails on a rigid bed, with coarse and fine movement, a vernier scale and eyepiece cross-hairs.

Note: Teaching model depicting neonatal tetanus (Clostridium tetani infection) for neonatal infection and paediatrics classes.

Note: Teaching model depicting tubectomy (tubal ligation) female sterilization procedure for family planning and reproductive health classes.

Note: Teaching model depicting trachoma (chronic Chlamydia trachomatis conjunctival infection) for eye infection and community health classes.

Note: Teaching model depicting pulmonary tuberculosis infiltration and cavity formation for tuberculosis pathology classes.

Note: Teaching model depicting cavitary tuberculosis of the lung for tuberculosis pathology classes.

Note: Laboratory test sieves: 200 mm brass frames or 300 mm stainless steel frames, stainless steel mesh.

Note: Training panel on a gas combination water heater, propane-fired, with flame window and measuring instruments.

Note: Compact temperature data logger with high sampling rate.

Note: Wall-mounted jib and tie frame with spring balances for tension coefficient experiments.

Note: Backboard apparatus for two- and three-wire suspension systems with spring balances.

Note: Geography teaching globe model; configuration confirmed on the quotation.

Note: Rimmed borosilicate test tubes in six capacities from 8 ml to 70 ml.

Note: Stout-walled thistle funnel with a 300 mm stem.

Note: 200 mm stainless steel tongs for test tubes and crucibles.

Note: Y-shaped 3-way polypropylene tubing connector.

Note: Graduated tall form borosilicate beakers with spout, 50 ml to 1000 ml.

Note: Glass connectors in straight, T and Y shapes with 6 mm outside diameter for joining laboratory tubing.

Note: Borosilicate test tubes from 75 x 10 mm to 150 x 24 mm with 1.0 or 1.2 mm walls.

Note: Borosilicate side-arm test tube, 150 mm long x 24 mm OD.

Note: Polished wooden test tube rack, 16.5 x 3 inches, with a heavy base.

Note: Blackened steel crucible tongs, 200 mm, and stainless steel beaker tongs with 25 mm jaws.

Note: Two-shelf stainless steel trolley, 75 x 45 x 90 cm, on four 10 cm swivel castors.

Note: 250 x 20 x 2 cm hardwood trolley runway with reinforced sides.

Note: Mercury-in-glass thermometer, 10-200 °C x 1 °C.

Note: Bimetallic gas thermostat with handle, 25 cm long, complete with burner connection.

Note: Set of 8 stainless steel tuning forks, 256-512 Hz, in case with hammer.

Note: Teaching model depicting tattoo marks on the forearm as a permanent identification mark for personal identification classes.

Note: Teaching model depicting tyre-mark patterned injury on the skull consistent with a lorry running over the head for road traffic injury pattern study classes.

Note: Twice-enlarged transparent lung model showing 18 bronchopulmonary segments.

Note: Wound-care and trauma-management training simulator with multiple injury modules.

Note: Self-contained three-phase separation trainer with see-through vessels, supplied by JaincoLab.

Note: Youth-size torso with head, approx. 46 cm tall, 7 parts, on a base with English key card.

Note: Life-size sexless torso in 10 parts with removable organs, numbered with an English key card.

Note: Life-size 14-part torso with interchangeable male and female sex organs, numbered with an English key card.

Note: Life-size 24-part torso with interchangeable male and female genital organs, open back and removable 7th dorsal vertebra, on a base with English key card.

Note: Life-size 17-part muscle torso with open neck and back showing the spinal cord, on a base with English key card.

Note: How the genetic code in DNA is transcribed into mRNA for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Telomeres and the role of telomerase in maintaining chromosome ends for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Models listed as TTB 3, TTB 10, TTB 30, TTB 31, TTB 10 H, TTB 20 H, TTB 20 HH and TTB 30 H; pans 220 x 270 mm or 230 x 320 mm; auto power off with battery indicator.

Note: The course of tuberculosis infection for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The serological course of hepatitis B infection for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: 20 litre table-top autoclave with automatic control, water inlet and auto-dry mode, 121 °C and 134 °C sterilisation settings.

Note: Clockwork thermo hygrograph recording -15 to +65 °C and 0-100% RH on daily or weekly charts.

Note: Tribrach with circular bubble, without optical plummet; thread and adaptor details are confirmed on the quotation.

Note: Laboratory tripod stand in wire, sheet or cast iron versions, made by JaincoLab.

Note: Watts pattern theodolite offered in 10 second and 20 second accuracy models; tripod and case are confirmed on the quotation.

Note: Indian pattern tangent clinometer in regular and deluxe models, made by JaincoLab.

Note: Hydraulic test stand for control valve characteristics; supplied by JaincoLab.

Note: Hardware-in-the-loop controller tuning trainer; supplied by JaincoLab.

Note: Profibus DP field bus benchtop trainer; supplied by JaincoLab.

Note: Industrial process controller trainer with simulated first-order lag; supplied by JaincoLab.

Note: Flow control training system with software controller; supplied by JaincoLab.

Note: Level control training system with pressure-sensor level measurement; supplied by JaincoLab.

Note: Linear position control training system; supplied by JaincoLab.

Note: Pressure control training system with software controller; supplied by JaincoLab.

Note: Heated-bar temperature control training system with Peltier element; supplied by JaincoLab.

Note: Two-variable level and vacuum control test stand; supplied by JaincoLab.

Note: Tissue culture hood with SS work top, plexiglass door, UV germicidal light and fluorescent light.

Note: Rod-and-vessel tissue homogenizer, 1/20 HP 4000 RPM, glass vessels 10-100 ml.

Note: Slow-speed tube rotator, 5-50 RPM, adjustable angle, discs for 10-30 mm tubes, with timer.

Note: Four-roll test tube roller for gentle mixing of blood samples and cell suspensions in closed tubes.

Note: Tripod projection screen with white surface, height adjustment and keystone correction, supplied by JaincoLab.

Note: Table-top double disk metallurgical polisher/grinder with digital variable speed of 10 to 1400 rpm.

Note: Temperature and humidity data recorder, 8-bit, 7943 readings, non-volatile memory, supplied by JaincoLab.

Note: Tullgren-type soil funnel for a 220 V lamp, with coarse and fine mesh and 3-core cable; bulb, beaker and stand not provided.

Note: Extracts small animals from soil samples using lamp heat. Supplied with lamp, mesh funnel and collecting jar; stand not included.

Note: Colour sequence pale yellow to red to green; instructions included. Number of demonstrations per kit is confirmed on the quotation.

Note: Eight microscope images introducing cell structure and scale, supplied by JaincoLab.

Note: Eight microscope images of bacteria and cyanobacteria with a student text folder, supplied by JaincoLab.

Note: Microscope images of protists with their phyla, supplied by JaincoLab.

Note: Eight microscope images of fungi with a student text folder, supplied by JaincoLab.

Note: Eight images surveying the plant kingdom with a student text folder, supplied by JaincoLab.

Note: Microscope images of earthworm anatomy with a student text folder, supplied by JaincoLab.

Note: Platinum-coated metal mesh electrodes act as the catalyst; charged briefly from a 9 V battery; enough materials for 5 demonstrations. Battery and voltmeter are confirmed on the quotation.

Note: Trypsin pack with exposed film and buffers for pH and temperature investigations, supplied by JaincoLab.

Note: 25 g trypsin powder for protein digestion practicals, supplied by JaincoLab.

Note: Gene expression and temperature investigation kit, supplied by JaincoLab.

Note: 24 in Clever Catch question ball on the effects of smoking, supplied by JaincoLab.

Note: Microscope images of leaf structure with a text folder, supplied by JaincoLab.

Note: Immune system demonstration board kit, supplied by JaincoLab.

Note: Microslide set of eight labelled 35 mm photomicrographs on the reflex arc, supplied by JaincoLab.

Note: Microslide set of photomicrographs on teeth and gums, supplied by JaincoLab.

Note: Microslide set of eight labelled 35 mm photomicrographs on the circulatory system, supplied by JaincoLab.

Note: Microslide set of eight labelled 35 mm photomicrographs on the human digestive system, supplied by JaincoLab.

Note: Microslide set of eight labelled 35 mm photomicrographs on the senses, supplied by JaincoLab.

Note: Half-size 12-part youth torso model, approx. 450 mm high, made by JaincoLab.

Note: Natural-size 14-part torso with interchangeable sex organs, made by JaincoLab.

Note: Natural-size 10-part sexless torso with head, made by JaincoLab.

Note: Rimmed glass test tube, 12 mm diameter; length and glass type confirmed on the quotation.

Note: Laboratory thermometer, 0 to 150°C; type, length and graduation confirmed on the quotation.

Note: Laboratory thermometer, 0 to 50°C; type, length and graduation confirmed on the quotation.

Note: Self-contained student titration kit; kit contents confirmed on the quotation.

Note: Teeth model showing upper and lower teeth and tooth composition, supplied by JaincoLab.

Note: Triple folding magnifier with three 25 mm lenses, made by JaincoLab.

Note: Classroom activity kit on teeth and eating; contents confirmed on the quotation.

Note: Ten-layer DNA double helix model kit with 640 atom parts and stand, supplied by JaincoLab.

Note: Self-assembly two-layer DNA molecular model kit, supplied by JaincoLab.

Note: Microslide of eight planetary images from space missions; viewer not included.

Note: Model kit for a 3-D model of the Terylene (polyethylene terephthalate, polyester) polymer chain; the piece count is confirmed on the quotation.

Note: Drinking water test kit with 50 strips each for five parameters, for a class of 40.

Note: Pond and stream test kit with 50 strips each for four parameters, for a class of 40.

Note: High-vacuum Tel tron S-series diode tube with a thermionic cathode, supplied by JaincoLab; it mounts on the Tel tron Tube Holder S.

Note: Helium-filled Tel tron S-series tube with two electron guns, supplied by JaincoLab; used with a Helmholtz coil pair and the Tube Holder S.

Note: Tel tron D-series deflection tube supplied by JaincoLab; magnetic deflection uses the Helmholtz Pair of Coils D, listed separately.

Note: Tel tron D-series electron diffraction tube supplied by JaincoLab; it mounts on the Tel tron Tube Holder D, listed separately.

Note: Tel tron S-series electron diffraction tube supplied by JaincoLab; it mounts on the Tel tron Tube Holder S, listed separately.

Note: Helmholtz coil pair for Tel tron D-series tubes, supplied by JaincoLab; the coils fix to the Tel tron Tube Holder D.

Note: Student-series Helmholtz coils supplied by JaincoLab; the Tel tron Tube Holder S sets their spacing, up to 150 mm.

Note: Tel tron D-series Maltese cross tube supplied by JaincoLab; magnetic-field work uses the Helmholtz Pair of Coils D.

Note: Tel tron D-series Perrin tube supplied by JaincoLab; magnetic deflection uses the external Helmholtz Coils D.

Note: Tel tron Student-series Perrin tube supplied by JaincoLab; it mounts on the Tel tron Tube Holder S.

Note: Stand for all Tel tron D-series tubes, supplied by JaincoLab; two base holes take the Tel tron Helmholtz Pair of Coils D.

Note: Holder for the whole Tel tron S series, supplied by JaincoLab; it positions the Helmholtz Pair of Coils S up to 150 mm apart.

Note: Concentric-sphere apparatus for the thermal conductivity of insulating powder, with 10 PT-100 sensors.

Note: Tag terminals for fixed wires or crocodile clips. A press-stud version is also listed.

Note: Set of air-dried, sieved soil samples, 15 mL each.

Note: Contour-model mapping activity with illustrated teacher's and student's guide.

Note: Photomicrograph lesson set on the leaf of a flowering plant, supplied by JaincoLab.

Note: Photomicrograph lesson set on the root of a flowering plant, supplied by JaincoLab.

Note: Photomicrograph lesson set on the stem of a flowering plant, supplied by JaincoLab.

Note: Flower longitudinal section model, approx. 330 x 250 x 65 mm, made by JaincoLab.

Note: Large detachable typical flower model, made by JaincoLab.

Note: Plant cell ultrastructure model on plastic base, made by JaincoLab.

Note: Toggle switch rated at 250 V, 1.5 A AC, supplied in packs of 10.

Note: Base-mounted two-stroke diesel engine model with hand crank, for showing the internal working and stroke cycle of the engine.

Note: Three parallel-connected lamp holders with 3 lamps on a 165 x 100 mm base with 4 mm sockets, used as an output indicator for the motor/generators.

Note: Lenz's law accessory for the demountable transformer kit and U-core, for demonstrating large magnetic fields and induced currents. Contents are itemised on the quotation.

Note: Base-mounted cutaway-section model in light, strong metal showing the internal stages of a turbine engine.

Note: Eight-bucket rotor in a 50 x 50 x 25 mm chamber with clear perspex front, 15 mm shaft pulley and driving belt; runs as a water turbine or as a motor-driven pump.

Note: Dynamics kit with 1.2 m aluminium track, two trolleys, masses and ticker tape timer. Ticker tape rolls and quantities are confirmed on the quotation.

Note: Box of 100 carbon discs, 50 mm diameter with 4 mm hole, for ticker tape timers.

Note: Stand designed to hold ticker tape rolls for use with ticker tape timers.

Note: 12 V electromagnetic ticker tape timer printing dots at mains frequency (50-60 Hz), with 4 mm terminal sockets.

Note: Pack of 5 ticker tape rolls, each 30 m x 15 mm, for ticker tape timers.

Note: 6 V AC ticker tape timer printing dots at mains frequency via a carbon disc, with 4 mm terminal sockets.

Note: Clear, polished triangular acrylic prism for optics experiments.

Note: Clear, polished triangular acrylic prism, 25 mm, for student optics work.

Note: Semiconductor junction plates between aluminium plates, switchable to a motor fan or 4 mm sockets; shows heat-to-electricity and, at 5 V DC, electricity-to-temperature-difference conversion.

Note: Copper coil of about 7-10 ohm in a paraffin-filled borosilicate tube, for the temperature coefficient of resistance.

Note: Two-instrument kit with a 50 mm refractor telescope and a mirror and LED beginner microscope, supplied by JaincoLab.

Note: Trinocular microscope listed with an 8 in LCD touchscreen camera on its C-mount port; mains voltage and camera supply are confirmed on the quotation.

Note: Trinocular laboratory microscope with a 50/50 phototube and 0.5x C-mount for camera work, plan achromatic objectives and 5 W LED Koehler lighting.

Note: Trinocular microscope with an 8 in touchscreen camera for focusing and capturing images on screen, plan achromatic objectives and 5 W LED Koehler lighting.

Note: Decade inductance box with three dials; 2, 4 and 5 dial versions also listed.

Note: Three-magnification binocular stereo microscope on a post stand with separately switched top and bottom LED lights.

Note: Trinocular zoom stereo microscope with full HD camera output, 105 mm working distance and auxiliary lenses for 3.4x to 90x, supplied by JaincoLab.

Note: Trinocular zoom stereo microscope, 6.7x to 45x, with 105 mm working distance, camera interface and long track stand, supplied by JaincoLab.

Note: Trinocular zoom stereo microscope on a pillar stand with a C-mount camera port; the light source is an option on the quotation.

Note: Twelve labelled glass slides of natural and synthetic textile fibres in a slotted plastic case.

Note: PCR thermal cycler, multi-format 96-well block, 0-100°C, 4°C/s ramp, universal 75-275 V.

Note: Class-sized technology starter pack designed with the CAPS curriculum in mind; the contents are confirmed on the quotation.

Note: Aluminium dynamics track with end stopper bracket.

Note: Moving coil DC ammeter, 0-50 mA / 0-500 mA / 0-5 A.

Note: Moving coil DC voltmeter, 0-3 / 0-15 / 0-300 V.

Note: The tenoning machine cuts tenons for mortise-and-tenon joints in joinery training.

Note: TIG (tungsten inert gas) welding equipment welds with a non-consumable tungsten electrode under an inert shielding gas, giving clean, precise welds on thin steel, stainless steel and aluminium.

Note: The tube bending machine is a hydraulic pipe bender for large-diameter pipe, with bend angles adjustable from 0 to 180° and pipe sizes up to 8 inches listed.

Note: Tapered triangular hand file on a hardwood handle for square corners, internal angles over 60°, re-shaping damaged threads and scoring glass before cutting.

Note: Thermometer armour cases in nickel-plated brass, plastic or aluminium, many sizes.

Note: Steel trowels, 100 to 150 mm blade, in pointed, cement and rectangular types.

Note: General purpose tool kit with carrying bag; contents confirmed on the quotation.

Note: Triple prism reflector set for total stations, supplied by JaincoLab.

Note: Telescopic alidade for plane table surveying, made by JaincoLab.

Note: Illuminated tracing table for maps and drawings, made by JaincoLab.

Note: The triaxial test set provides a triaxial cell and the specimen accessories for 70 mm diameter soil specimens, for unconsolidated undrained (UU), consolidated undrained (CU), consolidated drained (CD) and unconfined compression (UC) tests.

Note: Plated steel bar moulds with 254 mm gauge length, in two-gang and single versions; contact points sold in packs of 100.

Note: Torsion testing machine with pendulum dynamometer for the strength of materials lab; supplied by JaincoLab.

Note: Electrically operated tensile testing machine up to 10,000 kgf; supplied by JaincoLab.

Note: Combination (two in one) belt grinder for workshop finishing; configuration confirmed on the quotation; supplied by JaincoLab.

Note: The threading tool holder is a carbide insert holder for external threading on the lathe, with an offset shank, a 10-degree end cutting edge angle and neutral rake.

Note: The tilting and swiveling vice holds work on the machine table and can be swivelled through 360 degrees horizontally and tilted through 90 degrees vertically, with positive locking to withstand heavy loads.

Note: Tilting open channel flume with acrylic sides and recirculating supply; supplied by JaincoLab.

Note: The thread sucking machine removes loose threads, lint and dust by suction, collecting them in an easily removable lint filter.

Note: Transparent and cut-section hydraulic valves, cylinders and pump for construction study.

Note: Transparent and cut-section pneumatic valves and cylinders for construction study.

Note: AC/DC TIG welding machine, 250 A, for welder training; supplied by JaincoLab.

Note: Steel tool box with two trays and padlock catch, about 175 x 200 x 500 mm; supplied by JaincoLab.

Note: HSS metric tap and die set, 6-12 mm, 7 sizes, in fitted case; supplied by JaincoLab.

Note: HSS metric tap and die set, 14-24 mm, 6 sizes, in fitted case; supplied by JaincoLab.

Note: Weight-driven three stage spur gear trainer for gear dynamics and inertia experiments; supplied by JaincoLab.

Note: Shell-and-tube and plate heat exchanger set-up with feedback temperature control; ratings on the quotation; manufactured by JaincoLab.

Note: Thermal expansion experiment set with dilatometer and pycnometer methods; supplied by JaincoLab.

Note: Type K thermocouple for high-temperature measurement; supplied by JaincoLab.

Note: Analog 10 mV/°C temperature sensor; supplied by JaincoLab.

Note: Small-scale concentric-tube heat exchanger for teaching, supplied by JaincoLab; runs on a heat exchanger service unit.

Note: Peltier thermoelectric heat pump accessory for a heat transfer service unit, supplied by JaincoLab.

Note: Laminated and full-colour 58 x 90 cm wall chart on the parts of a typical flowering plant with plastic rollers, for primary and middle-school science classes.

Note: Laminated and full-colour 58 x 90 cm wall chart on the structure of a typical plant cell with plastic rollers, for Class 8, 9 and 11 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on the transverse section of a monocot stem with plastic rollers, for Class 11 biology and B.Sc botany anatomy practicals.

Note: Laminated and full-colour 58 x 90 cm wall chart on the transverse section of a dicot stem with plastic rollers, for Class 11 biology and B.Sc botany anatomy practicals.

Note: Laminated and full-colour 58 x 90 cm wall chart on the transverse section of a monocot root with plastic rollers, for Class 11 biology and B.Sc botany anatomy practicals.

Note: Laminated and full-colour 58 x 90 cm wall chart on the transverse section of a dicot root with plastic rollers, for Class 11 biology and B.Sc botany anatomy practicals.

Note: Laminated and full-colour 58 x 90 cm wall chart on the transverse section of a monocot leaf with plastic rollers, for Class 11 biology and B.Sc botany anatomy practicals.

Note: Laminated and full-colour 58 x 90 cm wall chart on the types of leaves with plastic rollers, for middle-school science and Class 11 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on the structure and germination of seeds with plastic rollers, for middle-school science and Class 11 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on the tapeworm, Taenia with plastic rollers, for Class 11 biology and B.Sc zoology.

Note: Tap reseating tool set with 2 double bush sets, 2 cones and 4 cutters; supplied by JaincoLab.

Note: Retractable trimming knife with 6 inch aluminium handle and three blades; supplied by JaincoLab.

Note: Specimen count and materials are confirmed on the quotation.

Note: Tube only; the diode base is listed separately.

Note: Supplied without the 6 x 4 tube.

Note: Flat-plate thermopile of many junctions: current makes one side hot and the other cold (ice can form), and a heated junction generates a voltage.

Note: Non-contact digital tachometer, 2.5 to 99,999 RPM with 0.05% accuracy, laser pointer and memory recall; supplied with 4 x AA batteries.

Note: Runs from 240 V AC mains and times up to 99.9999 s at 0.1 ms resolution. Photogates and other accessories are confirmed on the quotation.

Note: Used to view bugs from all angles. Size and magnification are confirmed on the quotation.

Note: Plain glass U tube in four listed sizes. State the size and quantity on your enquiry.

Note: Countdown range 99 minutes 59 seconds with a count-up stopwatch mode. Requires 2 x AAA batteries.

Note: Ternary liquid-liquid equilibrium study bench with three jacketed glass cells; supplied by JaincoLab.

Note: Three-phase catalytic reaction unit with data acquisition; supplied by JaincoLab.

Note: Wiped thin film evaporation plant with vacuum pump; supplied by JaincoLab.

Note: The 14-inch colour television trainer is built to teach television operation, theory, repair and servicing, with particular attention to fault diagnosis so that troubleshooting can be taught step by step.

Note: The tape recorder trainer teaches the operation, theory, repair and servicing of solid-state tape recorders, with fault diagnosis used to build troubleshooting skills.

Note: The TV Antenna Trainer teaches the reception and distribution of television signals.

Note: The Transformer and Metering Experimental Trainer supports a course on transformers and metering, and gives background theory and practice for the later study of electrical machines.

Note: The Temperature Process Control Trainer gives an experimental introduction to the fundamentals of process control, using temperature control as the example.

Note: The Training System for DDC Control teaches the basic operation of direct digital control (DDC) systems, which are used to control building services such as heating, cooling, lighting, electrical and security systems, and in industrial processes.

Note: Motorised demonstrator of a sectioned manual transmission and drive axle; supplied by JaincoLab.

Note: Sectioned turbochargers for teaching engine air boosting; supplied by JaincoLab.

Note: Base-frame trainer with gear, pulley and chain sets for transmission principles; supplied by JaincoLab.

Note: Hand-operated 2-stroke and 4-stroke petrol engine instruction models; supplied by JaincoLab.

Note: Hand-operated 2-stroke and 4-stroke diesel engine instruction models; supplied by JaincoLab.

Note: Traffic situation trainer and full size traffic light trainer for driver education; supplied by JaincoLab.

Note: Feedback-controlled soil load frame for CBR, UCS and triaxial tests, available in 4-speed and 34-speed versions.

Note: Configurable load-frame triaxial system with frames from 50 kN to 2 MN.

Note: Automated stress path triaxial system with a Bishop and Wesley type cell.

Note: Research apparatus that controls all three principal stresses independently, with dynamic actuators.

Note: Acrylic triaxial cells for 38 mm and 50 mm soil specimens, up to 20 bar.

Note: Triaxial compression test outfits for soil shear strength.

Note: 150 bar nickel-plated triaxial cell for rock cores; supplied by JaincoLab.

Note: Complete rock triaxial testing outfit with 100-500 kN frame options; supplied by JaincoLab.

Note: Geosynthetic thickness gauge with adjustable foot pressure; supplied by JaincoLab.

Note: Tile abrasion testing machine with lever loading; supplied by JaincoLab.

Note: Tile flexure strength tester with lead-shot lever loading; supplied by JaincoLab.

Note: Temperature process control trainer with process and heating loops; supplied by JaincoLab.

Note: Bench-top service unit that supplies, loads and logs small demonstration turbines, supplied by JaincoLab.

Note: 3 inch test sieves, all stainless or brass/stainless, full or half height, in the listed opening sizes.

Note: Made as per DepEd guidelines. Used for resting test tubes for specimen viewing and storage.

Note: Made as per DepEd guidelines. Used for holding heated test tubes; stable in holding heated test tubes.

Note: As per DepEd guidelines. Supplied with 100 carbon paper discs, 3 rolls of ticker tape and a clamp.

Note: As per DepEd guidelines. Flexible fibreglass tape supplied with a plastic case.

Note: As per DepEd guidelines. Packed in a resealable pouch.

Note: As per DepEd guidelines. Transparent plastic template with a minimum of 24 geometric shapes.

Note: As per DepEd guidelines. Holds beakers from 50 mL to 1000 mL.

Note: As per DepEd guidelines. Nylon bristles on a galvanised wire handle with hanging loop.

Note: As per DepEd guidelines. Reusable borosilicate test tube, 16 x 150 mm.

Note: As per DepEd guidelines. Stainless steel crucible tongs with serrated tips.

Note: As per DepEd guidelines. 7 pieces; all angles are multiples of 45 degrees.

Note: As per DepEd guidelines. Demonstrates folds, faults, erosion, compression and rift valleys.

Note: Made as per DepEd guidelines. Stainless steel, 6 1/2 inches long.

Note: Made as per DepEd guidelines. Moved only by pushing; no battery or motor.

Note: Made as per DepEd guidelines. Two 1.25 inch multi-coated eyepieces supplied.

Note: Made as per DepEd guidelines. Digital frequency readout.

Note: Made as per DepEd guidelines. Frequency and note letter stamped on each fork.

Note: Copper-iron thermopile, seven junctions, brass connectors.

Note: 2 m soft-grip measuring tape, metallic housing.

Note: Glass test tube 12 x 100 mm with rim.

Note: Eight tuning forks 256-512 Hz with hard/soft mallet in a foam-lined wooden box.

Note: Glass test tube 16 x 150 mm with rim.

Note: Metal dissecting tray with wax base, 28 x 20 cm.

Note: House fly mouth parts and whole body slide.

Note: Stained slide of three types of bacteria.

Note: Tilia (linden) botany slide in a plastic box.

Note: Tilia 3-year-old stem cross-section slide.

Note: Magnified liver model with spleen, gall bladder, pancreas and duodenum.

Note: Teaching item on the eye and sight; format and size confirmed on the quotation.

Note: Laminated DNA structure wall chart, 70 x 100 cm.

Note: Laminated animal evolution wall chart, 70 x 100 cm.

Note: Laminated wall chart on the external appearance of the heart, 70 x 100 cm.

Note: Laminated wall chart on the parts of the skin, 70 x 100 cm.

Note: Warm white LED torch, aluminium body, lithium-ion battery.

Note: Laboratory tool set; contents confirmed on the quotation.

Note: Laminated terrestrial biomass wall chart, 70 x 100 cm.

Note: Laminated marine food chain wall chart, 70 x 100 cm.

Note: Borosilicate 3.3 side-arm test tube, 150 x 24 mm.

Note: Rectangular 12-cavity spotting tile; material confirmed on the quotation.

Note: 8 mm polypropylene T-type tubing connector.

Note: 8 mm polypropylene Y-type tubing connector.

Note: White polypropylene four-way cross tubing connector.

Note: Polypropylene rack for six 25 mm test tubes.

Note: 18 cm wooden spring test tube clamp.

Note: 16 cm spring steel wire test tube holder, tubes up to 40 mm.

Note: 5 cm pipe clay triangle with porcelain tubes.

Note: Metal tape measure; length and graduations confirmed on the quotation.

Note: Stainless steel dissection tray, 30 x 25 cm.

Note: Wooden test tube holder for gripping hot test tubes.

Note: Wooden test tube rack with 12 holes.

Note: Nickel-plated Hoffman screw clamp for 12 mm tubing.