You have searched for products starting with "F"

Note: The Float Rack is a compact polypropylene rack that holds 16 microcentrifuge tubes floating in a water bath during incubation.

Note: The polypropylene funnel holder clamps onto a stand rod and supports filter funnels during gravity filtration in school, college and research laboratories.

Note: The polypropylene long stem funnel is a clear filter funnel for gravity filtration and for filling narrow-necked flasks and bottles in chemistry laboratories.

Note: The polypropylene Fisher clamp holds burettes on a stand rod for titrations in school, college and industrial laboratories.

Note: This funnel holder fits on a laboratory stand rod and carries filter funnels of 3 to 6 inch diameter over a receiving vessel.

Note: These polypropylene funnel holders clamp to a stand rod to support one or two funnels while filtrates collect below.

Note: The polypropylene flask stand is a stepped support that keeps round bottom flasks upright on the bench.

Note: Female pelvis model, 10 x 7 x 8.5 inches, with the uterus, rectum, bladder, ligaments and muscles shown for anatomy teaching.

Note: Functional elbow model on a base with flexible biceps and triceps to show flexion, extension and antagonist muscle action.

Note: PVC model of the foetal and child skull with a spring-hinged mandible, for anatomy teaching.

Note: Life-size PVC model of the foot joint bones and ligaments.

Note: Working eye model with flexible lens to show focusing and sight defects; needs a battery.

Note: Model of the female urinary and genital organs. For teaching use only.

Note: Female urethral catheterisation trainer with magnetic genital insert, supplied by JaincoLab. For training use only.

Note: Fractured spine teaching model; details confirmed on the quotation.

Note: Four flexible knee models showing osteoarthritis stages, supplied by JaincoLab. For teaching use only.

Note: Life-size set of 9 fetal development models with removable fetus, supplied by JaincoLab. For teaching use only.

Note: Four-stage liver disease model with pull-out card, supplied by JaincoLab. For teaching use only.

Note: FET characteristics apparatus with BFW10, two DC supplies and three meters.

Note: Neon flashing and quenching apparatus with 100 V DC supply, three switchable capacitors and neon lamp.

Note: FET common source amplifier apparatus with built-in regulated DC supply.

Note: Nesting rubber filter adapters for Buchner funnels on filter flasks.

Note: Boxed vacuum filtration kit with Buchner funnel, hand pump with gauge, filter papers and stopper.

Note: The 1 GHz frequency counter is a microprocessor-based, high-resolution instrument for measuring signal frequency in electronics and communication laboratories.

Note: The ramp comparator firing circuit trainer shows how firing pulses for a single phase converter are produced with the ramp comparator scheme.

Note: The firing circuit using op-amps and gates is a power electronics trainer for studying how firing pulses for a single-phase converter are generated with operational amplifiers and logic gates.

Note: The cosine wave firing circuit trainer demonstrates the cosine-wave comparator scheme for generating firing pulses for a single-phase converter.

Note: The forced commutation circuits trainer covers all five classes of SCR commutation, from Class A load resonance to Class E external pulse commutation.

Note: The frequency modulation and demodulation trainer is an FM transmitter and receiver on a single 300 x 400 mm PCB.

Note: The FSK modulation and demodulation board is used to generate a frequency shift keyed output and to demodulate it.

Note: The Fibre-Optic Simplex Digital Transceiver Trainer is a bench board for studying a one-way digital fibre-optic link: designing the link, observing rise-time and fall-time distortion and measuring propagation delay.

Note: This fibre optic trainer for numerical aperture is built around 660 nm and 850 nm analogue transmitters, a phototransistor receiver and PMMA fibre, with an NA jig, NA scale and mandrel for measurement work.

Note: The Fibre Optic Voice Transmitter and Receiver Trainer sends audio and speech over plastic optical fibre: a microphone feeds an audio amplifier and a 660 nm fibre-optic transmitter, and a phototransistor detector drives an 8 ohm speaker at the far end.

Note: The fiber optic power meter measures optical power in fibre-optic lab work at 850 nm, 1310 nm and 1550 nm, using a germanium photodiode.

Note: Electrically heated Cleveland open cup apparatus with brass cup, gas test-jet assembly and energy regulator. Thermometer IP 28C is an essential extra.

Note: Electrically heated Pensky-Martens closed cup apparatus in a wooden carrying case. Thermometers IP 15C and IP 16C are essential extras.

Note: Efflux-type flow cup for consistency control of paints, lacquers and other viscous products, supplied with a levelling stand.

Note: Factor board, 27 x 27 cm, for factor and multiple lessons. Board content and material are confirmed on the quotation.

Note: Set of 70 plastic algebra tiles in two colours and three shapes with a manual for polynomial and factorization work.

Note: Plastic balance with two detachable buckets and a sliding zero compensator for early measurement lessons.

Note: Two-sided fraction geoboard, 20 x 20 cm, with a square peg grid, a circular peg side and plastic fraction circle cuts up to 1/12.

Note: Folding metre stick with three hinges, folding into fourths, with metric calibration.

Note: Plastic cube section model, 12 x 12 cm, showing the formation of a tetrahedron.

Note: Fraction bar set of 51 plastic tiles, whole to twelfths, with fraction and percentage markings, in a plastic tray.

Note: Set of 200 pattern block pieces in 5 colours for fraction work. Shapes and sizes are confirmed on the quotation.

Note: Fraction squares manipulative for fractions, percentages and decimals. Piece count and sizes are confirmed on the quotation.

Note: Individual student fraction disc, 14 cm diameter, fractions up to 1/10, in a plastic container.

Note: Wooden frame abacus with 10 wires of 10 beads each in 10 colours, supplied by JaincoLab.

Note: Colour-guided wooden circle fraction pieces in a solid wood tray.

Note: Colour-guided wooden square fraction blocks in a solid wood tray.

Note: Colour-guided wooden triangle fraction blocks in a solid wood tray.

Note: Exhausting laboratory fume hood with wash basin, vertical sash, light and gas cock; size and exhaust arrangement are confirmed on the quotation.

Note: Set of 12 aluminium fractional weights, 1 mg to 500 mg, in a plastic case.

Note: Multi-jar flocculator with digital speed and timer display, two stored programs and illuminated sample viewing.

Note: Kit supplied by JaincoLab with cellulose nitrate or nylon 0.2 micron membranes; the vacuum pump model is confirmed on the quotation.

Note: Microprocessor-controlled fully automatic microtome, sections 0.5-100 microns and trimming 1-600 microns.

Note: ERMA type freezing microtome with CO2 attachment, 35 mm stage, sections up to 40 microns in 5 micron steps.

Note: The lever fits on one of three pins set at 90° on a vulcanite roller. The isotonic version has a cam instead of the after-load screw and comes without hook and weights.

Note: 15 x 10 cm board with cork sheet, elastic band and clamp.

Note: Transparent acrylic bath with chemically welded joints, clamp and drain, two adjustable silver electrodes and adjustable muscle lever fitments.

Note: Four-unit isolated organ bath with four glass inner vessels for running several tissue preparations together.

Note: Laminated and full-colour 58 x 90 cm wall chart on force and its effects with plastic rollers, for middle-school science and Class 9 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on friction with plastic rollers, for middle-school science and Class 11 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on fossil fuels with plastic rollers, for middle-school science and Class 10 science.

Note: Laminated and full-colour 58 x 90 cm wall chart on fire and fire extinguishers with plastic rollers, for middle and secondary school science classes.

Note: Laminated 70 x 100 cm wall chart on fats, for school science and home science classes.

Note: Laminated 70 x 100 cm wall chart on nutrition value of foods, for school science and home science classes.

Note: Laminated 50 x 75 cm wall chart on fractures with plastic rollers, for first aid training and school health education classes.

Note: Laminated 50 x 75 cm wall chart on factors affecting climate, for middle and secondary school geography classes.

Note: Laminated and full-colour 50 x 75 cm wall chart on flora and fauna with plastic rollers, for school environmental studies and geography classes.

Note: 70 x 100 cm wall chart on India's weather in February with plastic rollers, for school geography classes.

Note: Laminated 50 x 75 cm or 70 x 100 cm wall chart on fruits, for pre-primary and primary classes.

Note: 50 x 75 cm wall chart on flowers, for pre-primary and primary classes.

Note: 50 x 75 cm wall chart on flags of the nations, for primary and middle school classes.

Note: 50 x 75 cm wall chart on festivals of India, for primary and middle school classes.

Note: Laminated 50 x 75 cm wall chart on the Fox and the Crow story, for pre-primary and primary classes.

Note: 50 x 75 cm wall chart on the fight for Purna Swaraj, for school history and social studies classes.

Note: 50 x 75 cm wall chart on four-letter words, for pre-primary and primary English classes.

Note: Laminated 50 x 75 cm wall chart on the future tense (English grammar), for primary and middle school English classes.

Note: Laminated 50 x 75 cm wall chart on field signals with plastic rollers, for NCC and military science classes.

Note: Flat compass with clear display dial in several sizes and finishes, supplied by JaincoLab.

Note: Decorative brass four way compass for gifting and interiors, supplied by JaincoLab.

Note: Wooden frame abacus, 10 wires x 10 beads, 100 beads in 10 colours.

Note: Sectioned cube model showing tetrahedron formation. Size and material confirmed on the quotation.

Note: Double-sided geoboard with square and circular peg sides and fraction circle cuts up to 1/12.

Note: 70 plastic algebra tiles in two colours and three shapes, with manual.

Note: Fraction squares for fractions, percentages and decimals; contents confirmed on the quotation.

Note: 51 plastic fraction tiles, whole to twelfths, fractions front and percentages back, in a tray.

Note: 14 cm non-magnetic fraction disc, fractions up to 1/10, in a plastic container.

Note: Factor board for factors and multiples; size and layout confirmed on the quotation.

Note: Polypropylene counter-current wet scrubber that mounts on a fume hood, with pump and reservoir in the base cabinet.

Note: Deluxe laboratory fume hood in five working sizes from 4 ft to 8 ft, with optional exhaust system, ducting, storage and FRP or SS lining.

Note: Laboratory fumigation chamber for controlled fumigant treatment of samples; specification confirmed on the quotation.

Note: Forced convection laboratory oven with microprocessor control and two independent over-temperature protection systems.

Note: Dry powder type. Capacity and model are confirmed on the quotation.

Note: The magnetic field source and power supply are not listed with this item.

Note: Chain-driven overhead camshaft type. Ignition is indicated by a miniature bulb.

Note: Output symmetrical about zero with constant amplitude. The frequency range is confirmed on the quotation.

Note: Wheel about 20 cm diameter and 45 mm wide. Bracket fixes to a wall with four holes.

Note: Riders of 5 or 10 mg are aluminium. Spare fractional weights from 1 to 500 mg are available singly.

Note: Excited neon emits visible light, so excitation zones can be viewed directly. Configuration confirmed on the quotation.

Note: Four gripping prongs; finishes: zinc plating, black powder coating or nickel plating.

Note: Landform model of a fold mountain; size, material and base are confirmed on the quotation.

Note: Rigid PVC 3D wall model of the rock cycle, 70 x 100 cm, with aluminium frame and hooks.

Note: Rigid PVC 3D wall model on folds and faults; size is confirmed on the quotation.

Note: Rigid PVC 3D wall model of desert features; size is confirmed on the quotation.

Note: Magnetic set of 4 triangle types for finding the incentre.

Note: Plastic rulers, 30 cm, 60 cm and 100 cm.

Note: 10 kg multipurpose dry powder fire extinguisher supplied for laboratory safety; refilling and approvals follow local rules.

Note: Ring-form ferrite magnets for floating ring magnet demonstrations; sizes confirmed on the quotation.

Note: Stand with ring magnets that float apart by repulsion, for magnetism demonstrations.

Note: Demonstration force pump with cylinder, non-return valve and jet outlet.

Note: Metal foils in zinc, copper and lead, 350 x 300 mm, SWG 32, for conduction experiments.

Note: Electromagnet-release free fall apparatus with steel ball and digital timer for measuring g.

Note: Student-grade qualitative filter paper, 12.5 cm.

Note: Fortin's barometer, brass or aluminium, with dual scales and thermometer.

Note: Prepared microscope slide of a female egg (ovum) cell, prepared for microscope study.

Note: High grade steel tongs for holding flasks in the laboratory.

Note: Free fall apparatus for finding g from the fall time of a steel ball over a set distance.

Note: Silicone flask holder for flasks from 10 ml to 10000 ml, withstanding up to 280°C.

Note: Fixed-volume micropipette, 32 volumes from 2 to 1000 microlitres.

Note: Teaching model depicting familial adenomatous polyposis of the large intestine for gastrointestinal pathology classes.

Note: Teaching model depicting female reproductive organs: ovaries, fallopian tubes, uterus, cervix and vagina for female reproductive anatomy classes.

Note: Pedal-operated foot pump with pressure gauge, flexible hose and adaptor set for Boyle's law apparatus and other compressed-air uses.

Note: Disposable face masks for laboratory and training use; type and pack quantity are confirmed on the quotation.

Note: 10-part fetal pig anatomy model on base with key card, 39.5 x 53.5 x 18 cm.

Note: Laboratory fire blanket in various textures and standard thicknesses; size and material are confirmed on the quotation.

Note: 40 cm aluminium force table with four pulleys, hangers and twelve weights for laws of forces experiments.

Note: Glass biprism for physics optics practicals; prism angle, size and holder are confirmed on the quotation.

Note: Set of 24 numbered models on a wooden board showing frog development from egg to adult, with an English key card.

Note: Air-operated forced-air gas burner training panel, 13-28 kW rating class, with manometers and flame safeguard.

Note: CO2 freezing microtome cutting 5 to 40 micron sections of fresh tissue and industrial materials.

Note: Fume exhaust hood with centrifugal blower, lighting, services and counterbalanced sliding sash.

Note: Forced convection heat transfer apparatus with heated copper pipe, blower and 12 thermocouples.

Note: Forced vortex apparatus with motor-driven rotating cylinder and Pitot-static tube.

Note: Bench-mounted apparatus for triangle, polygon and link polygon of forces with up to five loads.

Note: Motor-driven flow table with 250 mm brass top and 12 mm cam drop.

Note: Magnetically levitating floating globe with electromagnet and hidden sensor.

Note: Round bottom and flat bottom flasks of 250 ml and graduated conical flasks of 500 ml and 1000 ml.

Note: 100 mm polythene filter funnel.

Note: 150 mm sharp stainless steel forceps with guide pin, in packs of 10.

Note: Borosilicate glass fractionating column of the rod-and-disc type with a removable 20-disc centre rod.

Note: Plain conical glass filter funnel, 70 mm top diameter, with a 100 mm polypropylene funnel also listed.

Note: Transparent graduated polypropylene separating funnel with stopper, in 100, 250 and 500 ml.

Note: Borosilicate narrow-neck round bottom flasks from 50 ml to 1000 ml, with neck outside diameters listed.

Note: Borosilicate narrow-neck flat bottom flasks from 50 ml to 1000 ml.

Note: Round bottom distillation flasks with a 75-degree side arm, 150 to 500 ml.

Note: Foot pump with gauge and adapter for Boyle's law apparatus.

Note: Teaching model depicting combined fracture and lacerated wound consistent with a heavy vehicle running over a body part for road traffic injury pattern study classes.

Note: Teaching model depicting whorl fingerprint pattern, with ridges forming a circular or spiral shape for fingerprint pattern identification classes.

Note: Teaching model depicting loop fingerprint pattern, with ridges curving back on themselves for fingerprint pattern identification classes.

Note: Teaching model depicting composite fingerprint pattern, combining features of more than one basic pattern for fingerprint pattern identification classes.

Note: Teaching model depicting arch fingerprint pattern, with ridges flowing across without looping for fingerprint pattern identification classes.

Note: The biological functions of carbohydrates, lipids and amino acids for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The biochemical pathways of fat and steroid metabolism for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The biological functions of lipids in energy storage, membrane structure and signalling for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Full-size 27-part muscular figure of the human body.

Note: Scale training model of a multi-pass fixed tube sheet heat exchanger with clear acrylic shell, supplied by JaincoLab.

Note: Training model of a single-pass fixed tube sheet heat exchanger, supplied by JaincoLab; specification confirmed on the quotation.

Note: Floating roof storage tank demonstration model supplied by JaincoLab; specification confirmed on the quotation.

Note: Polygonum-type angiosperm fertilization model, enlarged 300 times, on a base with explanatory notes and numbered key card.

Note: Fish skeleton teaching model on a base, numbered with an English key card.

Note: Prunus flower model, 9 times enlarged, separating into 3 parts on a stand with a numbered key card.

Note: Coloured geology model of five structural features (fault planes, fractures, dislocations) in cross section, on a base with key card.

Note: Teaching model of placental blood flow and the umbilical vein route into fetal circulation.

Note: Fifth cervical vertebra enlarged about 7 times, 7.5 x 32 x 24 cm, 1.8 kg, on a base with English key card.

Note: Francisella tularensis and the forms of tularaemia for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The main bacterial causes of food poisoning for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Capacity 150 kg, graduation 100 g; body fat and water in 0.1 increments; 4-user memory; detachable 38 mm (1.5 inch) LCD that shows a clock when idle; 35 x 21.8 x 46 cm.

Note: Imported and distributed range. Test range 5-40%; accuracy 0.5%; automatic uniform-pressure sample pressing; automatic temperature compensation; large display.

Note: Stainless steel and brass compression fittings for GC tubing: adaptors, male connectors, unions, nuts and front and back ferrules.

Note: Fine needle valve for adjusting the flow of nitrogen, hydrogen, air and other gases in a gas chromatograph.

Note: Flow and level control demonstration unit with cascade control; supplied by JaincoLab.

Note: Five-tank sedimentation apparatus for settling experiments; supplied by JaincoLab.

Note: Packed and fluidised bed flow apparatus; supplied by JaincoLab.

Note: Flash drum separation trainer using carbonated water; supplied by JaincoLab.

Note: Working FCC catalyst circulation model for operator training; supplied by JaincoLab.

Note: Jar test flocculator, 10-100 RPM, SS stirrers, illuminated base; supplied without beakers.

Note: SS membrane filter holder for 47 mm filters, with 1000 ml filter flask.

Note: Erma type freezing microtome with CO2 freezing attachment, sections 5-40 microns in 5 micron steps.

Note: Frog anatomy activity set with dissected views and a heart inset; format and contents are confirmed on the quotation.

Note: Microscope images introducing the five kingdoms of life, supplied by JaincoLab.

Note: 125 mm straight blunt-tip forceps in glass-filled nylon for specimen handling.

Note: 125 mm stainless steel blunt-tip forceps for dissection and specimen handling.

Note: 115 mm straight fine point stainless steel forceps, pack of 10.

Note: Large sectioned frog model on a wooden base for zoology teaching.

Note: Connects to a running water supply.

Note: Connects to a water supply via the inlet.

Note: Includes 4 joint clips 19/26. Stands and heat source not listed.

Note: Fruit fly genetics simulation kit with plastic pieces and teacher's guide, supplied by JaincoLab.

Note: Life-size embryo and fetus development set up to 16 weeks, supplied by JaincoLab.

Note: Eight colour-coded fabric swatches on a tag with an identification key card.

Note: Functional ear model showing how the eardrum, ossicles and cochlea work, supplied by JaincoLab.

Note: Two-part median section model of the female pelvis with numbered key card, made by JaincoLab.

Note: 10X folding magnifier with glass lens and aluminium cover, made by JaincoLab.

Note: Single-lens 25 mm folding magnifier, made by JaincoLab.

Note: Classroom activity kit on forces and friction; contents confirmed on the quotation.

Note: Self-assembly tristearate fat molecular model kit, supplied by JaincoLab.

Note: 500 x 500 mm folding quadrat frame in nylon-coated mild steel.

Note: Forced draft tray dryer with tray on a digital balance and variable air flow, for drying-rate practicals.

Note: Includes a 9 V battery and a Teacher's Guide. Circuits are built on a solderless breadboard.

Note: Resonance demonstrator with two weights, two cams on a 6 V speed-controlled motor and four springs; manual included, power source not included.

Note: Motor-effect apparatus: U-shaped magnet, brass rails with 4 mm terminals and a rolling brass axle.

Note: Set of 4 nesting aluminium Faraday pails on insulating feet, 75 to 150 mm diameter.

Note: Cotton friction cloth, 300 x 300 mm, for charging friction rods.

Note: Silk friction cloth, 300 x 300 mm, for charging friction rods.

Note: Iron flywheel, 115 mm diameter and 1.2 kg, running in bearings in a cast bracket with a 44 mm aluminium pulley, for electrical-to-kinetic energy demonstrations.

Note: Motor-effect demonstration apparatus for DC supplies up to 6 V, 3 A. Power supply and quantities are confirmed on the quotation.

Note: Beige 1 kg / 10 N tubular force meter with newton and gram scales and zero adjustment. Other capacities are confirmed on the quotation.

Note: Wall-type force board supplied with brackets, cords, pulleys and masses. Extra pulleys and masses are confirmed on the quotation.

Note: Force table for vector addition and equilibrium of concurrent forces, supplied with pulleys, masses and cords. Extra masses are confirmed on the quotation.

Note: Aluminium-bench dynamics kit for force, collision and inclined-plane experiments. Included components are confirmed on the quotation.

Note: Hinged wooden inclined plane with angle block and reversible friction slider. Force meters and masses are confirmed on the quotation.

Note: Self-contained band gap kit supplied by JaincoLab; the hot air oven, oil and thermometer are part of the set.

Note: The kit consists of a function generator and an analyzer for the harmonic analysis of complex waves.

Note: Light source, fibre and detector details are confirmed on the quotation.

Note: Fixed 2 V, 200 mA stabilised power supply with leads.

Note: Battery-free 20x field microscope with all-metal frame and wooden carrying case, supplied by JaincoLab.

Note: Frequency Wien bridge with coupled R1-R2 dials, capacitance decades and digital null detector.

Note: Fixed capacitance boxes, 0.01-2 mfd at 250 V and 5-40 mfd at 350 V, with 4 mm socket terminals.

Note: Decade capacitance box with four dials, 10 x 0.001 to 10 x 1 mfd; two- and three-dial versions listed.

Note: Air-cored fixed inductance boxes, +/-2.5% at 1000 c/s, in a bakelite case.

Note: Seventeen labelled glass slides of trace evidence and reference tissues for forensic science lessons.

Note: Life-size flexible PVC spinal column with pelvis and muscle markings, supplied by JaincoLab. For teaching use only.

Note: PVC fifth cervical vertebra at 7x life size with spinal cord section, on a stand, supplied by JaincoLab. For teaching use only.

Note: Set of four life-size vertebra models in stages of disease on a stand with a diagram, supplied by JaincoLab. For teaching use only.

Note: Set of 8 pregnancy development models on bases, supplied by JaincoLab. For teaching use only.

Note: Almost life-size PVC female pelvis in 3 parts with a key card, supplied by JaincoLab. For teaching use only.

Note: Articulated PVC foot skeleton with distal tibia and fibula on a base, supplied by JaincoLab. For teaching use only.

Note: Board-based kit for Hooke's law, parallelogram of forces and polygon of forces experiments; the itemised contents are confirmed on the quotation.

Note: Basic equipment for curriculum-aligned CAPS FET Life Sciences practicals; the itemised contents are confirmed on the quotation.

Note: Clamp-on pulley for the force board.

Note: Colour-coded fraction pieces, 1 to 1/12, in a tray.

Note: The flat file is a hand file for shaping and smoothing metal in fitting and welding workshop practice.

Note: The field CBR equipment measures the bearing capacity of soil in place, using a 50 kN field CBR jack to push a 50 mm penetration piston into the soil.

Note: Concrete flow table, manual or motorised, with conical mould and tamping rod.

Note: The fluid friction measurement apparatus measures friction losses in pipes and the loss factors of valves and fittings such as a tee, elbow, Y junction, gate valve and globe valve.

Note: Compact table-model fatigue testing machine with lever loading; supplied by JaincoLab.

Note: The flow meter demonstration compares three flow meters, a venturi meter, a variable area meter and an orifice plate, installed in series on a support frame that stands on the hydraulics bench.

Note: Floating carriage diameter measuring machine, 0-100 mm, for plain and thread diameters; supplied by JaincoLab.

Note: Wall-mounted flywheel apparatus for moment of inertia and energy storage experiments.

Note: The feeler gauge is a standard 25-blade gauge for measuring small gaps and clearances, with blades from 0.04 mm to 1.00 mm thick that fold into a metal case.

Note: The flat work ironer is a roll ironer for pressing flat items such as sarees, built to stand against a wall.

Note: The fully SS body tumbler is a laundry tumble dryer with a fully stainless steel body, offered in various standard designs and sizes.

Note: Francis (inward flow reaction) turbine test rig, 5 HP, with rope brake.

Note: Fluid mechanics laboratory package; contents agreed on the quotation.

Note: Flexible manufacturing system training unit built around a PLC-controlled CNC turning machine.

Note: Set of figure stamps 0 to 9, 5 mm high, boxed; supplied by JaincoLab.

Note: Fluidisation and fluid bed heat transfer unit using air; supplied by JaincoLab.

Note: Helical coil flow apparatus for pressure drop and friction factor experiments, made by JaincoLab.

Note: Closed-loop flow control trainer on a mobile powder-coated frame; instrument ratings on the quotation; manufactured by JaincoLab.

Note: Forced oscillation and resonance apparatus with LED frequency display; supplied by JaincoLab.

Note: Fibre optics training kit for signal, sound and data transmission; supplied by JaincoLab.

Note: 3 kg ratiometric force sensor with analog output; supplied by JaincoLab.

Note: 10 m fibreglass surveyors tape in a steel case, metric and imperial; supplied by JaincoLab.

Note: 200 mm bastard-cut machinist flat file; supplied by JaincoLab.

Note: 10 lb dry chemical ABC fire extinguisher for workshops and labs; local approvals confirmed on the quotation; supplied by JaincoLab.

Note: Wall-mounted first aid box with listed dressings, bandages, gloves and pins; supplied by JaincoLab.

Note: Chrome-vanadium flat cold chisel; size and hand guard on the quotation; supplied by JaincoLab.

Note: Rhino Rulers 2 m fibreglass folding ruler, metric and inch; supplied by JaincoLab.

Note: 250 mm footprint pipe spanner for pipes up to 44 mm; supplied by JaincoLab.

Note: 18 inch iron fore plane with 2-3/8 inch blade; supplied by JaincoLab.

Note: Laminated and full-colour 58 x 90 cm wall chart on the types of fruits with plastic rollers, for Class 11 biology and B.Sc botany.

Note: Five TCT Forstner bits, 15-35 mm, 10 mm shank; supplied by JaincoLab.

Note: Laminated and full-colour 58 x 90 cm wall chart on the fungi with plastic rollers, for Class 11 biology and B.Sc botany.

Note: 5-piece Forstner bit set, 15-35 mm, boxed; supplied by JaincoLab.

Note: Laminated and full-colour 58 x 90 cm wall chart on fertilization in animals with plastic rollers, for middle-school science and Class 12 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on the food habits of birds with plastic rollers, for primary and middle-school science.

Note: Laminated and full-colour 58 x 90 cm wall chart on the anatomy of a fish with plastic rollers, for Class 11 biology and B.Sc zoology.

Note: Floats in cool water (15 deg C) and sinks in warm water (30 deg C).

Note: Supplied as a pair of carts with rubber and spring steel bumpers.

Note: Floor-standing flat belt conveyor training unit; supplied by JaincoLab.

Note: Filter press and microfiltration pilot plant with PID control and supervision software; supplied by JaincoLab.

Note: The Fundamentals of Appliance Repair Trainer gives students a foundation in the electrical technology used in electrical appliances.

Note: The Fire Alarm Trainer introduces students and technicians to basic fire alarm systems, as groundwork for installing and maintaining fire alarms in buildings.

Note: Demonstrator built from a real small domestic freezer for operation and basic servicing exercises; supplied by JaincoLab.

Note: Wheel alignment trainer on an original car front end with alignment gauges; supplied by JaincoLab.

Note: Scale model front end for teaching steering geometry and alignment; supplied by JaincoLab.

Note: Original front wheel drive front end on a mobile frame for chassis training; supplied by JaincoLab.

Note: Front axle geometry trainer and Plexiglas compression ratio model for instruction; supplied by JaincoLab.

Note: Full-stroke 100 kN pushing unit for cone penetration testing, vehicle-mounted or soil anchored.

Note: Flat jack outfit for in-situ rock stress measurement; supplied by JaincoLab.

Note: Flexure testing machine for concrete beams; supplied by JaincoLab.

Note: Flow table for self-compacting concrete; supplied by JaincoLab.

Note: Motorised flow table for concrete; supplied by JaincoLab.

Note: Foundation Fieldbus process control training add-on; supplied by JaincoLab.

Note: Forced vortex apparatus with a motor-driven transparent tank and graduated traversing probe for plotting the free surface profile.

Note: Listing of fluid mechanics laboratory apparatus supplied by JaincoLab singly or as a complete laboratory.

Note: Hydraulics bench flow channel for open channel and flow visualisation demonstrations, supplied by JaincoLab.

Note: Self-contained unit for demonstrating and calibrating flow meters, supplied by JaincoLab.

Note: Weir kit for measuring open channel flow on a hydraulics bench, supplied by JaincoLab.

Note: Hydraulics bench apparatus for calibrating and comparing Venturi, orifice and variable area flow meters, supplied by JaincoLab.

Note: Floor-standing apparatus for studying friction and fitting losses in pipes, supplied by JaincoLab.

Note: Complete set of fluid properties and hydrostatics apparatus for introductory practicals, supplied by JaincoLab.

Note: Apparatus set for measuring density, capillarity, viscosity, atmospheric pressure and buoyancy, supplied by JaincoLab.

Note: Apparatus demonstrating hydrostatics and different types of manometer, supplied by JaincoLab.

Note: Apparatus for producing and measuring free and forced vortices, supplied by JaincoLab.

Note: Fluid statics unit for piezometer, level measurement, hydrostatic paradox and pressure gauge experiments, supplied by JaincoLab.

Note: Pressure measurement trainer comparing U-tube, inclined tube and Bourdon tube instruments for positive and negative pressures, supplied by JaincoLab.

Note: Temperature measurement training set with seven measuring devices, heat sources and calibration units, supplied by JaincoLab.

Note: Two floating bodies with different hull frames for metacentric height experiments, supplied by JaincoLab.

Note: Closed-circuit trainer for pipe flow and open-channel fundamentals, supplied by JaincoLab.

Note: Two-plate streamline visualisation apparatus with ink injection and sources and sinks, supplied by JaincoLab.

Note: Pipe-element set for measuring friction losses in air flow, supplied by JaincoLab.

Note: Aerodynamics trainer accessory for measuring the velocity profile and outlet loss of a free air jet, supplied by JaincoLab.

Note: Self-contained trainer for pipe flow, valve loss and flow measurement experiments, supplied by JaincoLab.

Note: Trainer for subsonic and transonic air flow experiments, supplied by JaincoLab.

Note: Made as per DepEd guidelines. Used to keep aquatic plants and animals and to demonstrate ecological interaction.

Note: Made as per DepEd guidelines. Circle and square shapes in whole and fractional parts; demonstrates the part-to-whole concept.

Note: As per DepEd guidelines. 500 mL round-bottom glass flask without graduations.

Note: As per DepEd guidelines. Demonstrates at least 3 coplanar forces in equilibrium.

Note: As per DepEd guidelines. Wet-strengthened creped cellulose filter paper, packed in a brown filter paper tube.

Note: As per DepEd guidelines. Narrow-mouth borosilicate Erlenmeyer flask, 250 mL.

Note: As per DepEd guidelines. Fluted short-stem borosilicate funnel, 75 mm.

Note: As per DepEd guidelines. Life-size one-piece longitudinal section.

Note: Made as per DepEd guidelines. For treating minor illnesses and injuries in an emergency.

Note: Made as per DepEd guidelines. Uses two 1.5 V size D dry cells.

Note: Made as per DepEd guidelines. Fuse rating engraved or etched on the metal cap.

Note: Double-dome LED ceiling O.T. light, 9-step intensity, 432 LEDs per dome, 220-240 V charging unit.

Note: Field kit with stereomicroscope for land insects and small animals.

Note: Field kit for freshwater micro-organisms with 400x microscope.

Note: 75 mm glass funnel, short stem.

Note: Rectangular flat glass mirror.

Note: 125 mm filter paper circles.

Note: Functional eye model with movable retina and water-filled silicone lens.

Note: Formalin, analytical reagent, 1000 ml.

Note: Free fall apparatus with scaled aluminium column, electromagnet release, photo gates and timer.

Note: Aluminium force table with 360° rim scale, four pulley clamps, cords, central ring and tripod base.

Note: Dissected frog preserved in formalin, in a closed glass container.

Note: Dissected fish preserved in formalin, in a closed glass container.

Note: Laminated botany wall chart on flower formation in angiosperms, 70 x 100 cm.

Note: Laminated wall chart of the female reproductive system, 70 x 100 cm.

Note: Laminated wall chart on fetal positions before birth, 70 x 100 cm.

Note: Laminated lake food pyramid wall chart, 70 x 100 cm.

Note: Laminated forest ecosystems wall chart, 70 x 100 cm.

Note: Laminated wall chart on forest ecosystems, 70 x 100 cm.

Note: 75 mm borosilicate filter funnel with 9 x 75 mm stem.

Note: Borosilicate glass filter funnel; sizes confirmed on the quotation.

Note: Small borosilicate filter funnel; dimensions confirmed on the quotation.

Note: Grade 2 qualitative filter paper, 8 micron retention.

Note: Group 7 (halogens) study kit; contents confirmed on the quotation.

Note: Fossil specimen collection with ID chart, labels, tray and guide.

Note: 250 ml borosilicate flat bottom flask with long neck.

Note: Filter paper circles, 120 mm diameter.

Note: Ferrous (iron(II)) sulfate, analytical reagent, 200 g, with MSDS.

Note: Analytical reagent formic acid supplied with MSDS; listed shelf life 5 years.

Note: Analytical reagent formaldehyde supplied with MSDS; strength confirmed on the quotation.

Note: Analytical reagent Fehling solution A supplied with MSDS; used mixed with Fehling B.

Note: Analytical reagent Fehling solution B supplied with MSDS; used mixed with Fehling A.

Note: Tribometer with tilting wooden plane, trolley, stand and masses for friction experiments.

Note: Tribometer: tilting wooden plane, 200 g roller trolley, stand and weights.

Note: Double-wall steel safety cabinet for keeping flammable liquids in one closed, lockable unit.

Note: Portable first aid kit for laboratories, classrooms and workshops; contents confirmed on the quotation.

Note: Round 1.25 V flash lamp bulbs with M.E.S. cap.

Note: Dual-range force sensor, ± 10 N or ± 80 N.

Note: Miniature 6 V flash lamp bulbs.

Note: Formaldehyde 35-38% (formalin), 1 litre, analytical reagent grade, with MSDS.

Note: 15 ml graduated polypropylene falcon tubes with gasket screw cap; autoclavable and freezable.

Note: 1 m white plastic flexible hose, chemical resistant.

Note: Prepared slide set of fungi on clear borosilicate glass in a white plastic box.

Note: 15 cm borosilicate glass filter funnel.

Note: 4 inch pointed stainless steel forceps, heat and chemical resistant.

Note: Fossil cast collection in a compartmented box with study guide.

Note: Chemical-resistant plastic tweezers for laboratory use.

Note: Large flower model with removable parts and bisected ovary, 17 x 8 x 13 inches.

Note: Food chain teaching model; details confirmed on the quotation.

Note: Prepared fungi slide set in a plastic box.

Note: Prepared frog blood cell slides.

Note: 50 mm white polyethene filter funnel, chemical resistant.

Note: Polythene, 75 mm diameter.

Note: 16 x 4 x 50 mm; poles marked.

Note: Cat. No. JSS-241/039; does not rot, stain or rust.

Note: Cat. No. JSS-267/043; woven glass fibre, 1800 mm.

Note: Cat. No. JSS-274/044; rubber.

Note: Cat. No. JSS-398/095; stem 80, 100 or 120 mm.

Note: Cat. No. JSS-401/096; 100, 250 or 500 ml.

Note: The plane can be set from 0 to 45 degrees. Supplied with a 200 g cart and 10-100 g weights.

Note: Freshwater microscopy kit with 400x monocular microscope, slides and coverslips.

Note: First aid station with blood stop dressings, burn compresses, eye wash spray, plasters, bandage, wound wipes and resuscitation protection; a refill kit is listed.

Note: Fire blanket for pot and pan fires and clothing fires, in a red screen-printed soft PVC pack.

Note: 24 acrylic integer flashcards (-12 to +12, no zero) with hooks.

Note: 20 acrylic fraction flash cards, 2 x 2 cm.

Note: Acrylic fraction strips, 55 pieces, 20 x 20 cm frame.

Note: Friction model: three 3 ft inclined tracks, blocks and force gauges.

Note: Assembled 3D-printed robotic hand demonstration model on a base with controller. Teaching use; not a medical prosthesis.

Note: Foundational literacy resource set; contents confirmed on the quotation.