You have searched for products starting with "R"

Note: The Reagent Bottle, Narrow Mouth is a polypropylene bottle for storing and dispensing laboratory reagents.

Note: The Reagent Bottle, Wide Mouth is a polypropylene bottle with a wide opening for storing solids, powders and viscous liquids that are awkward to pour through a narrow neck.

Note: The RIA Vial is a 12 x 75 mm tube offered in polypropylene or polystyrene, used in coagulation work and bacteriology.

Note: The reagent reservoir is a 75 ml trough that holds reagent for multichannel pipettes when filling microtiter plates in molecular biology, immunology and clinical laboratories.

Note: The polypropylene retort stand is a non-corrosive replacement for the metal stand used to hold clamps, burettes, funnels and flasks in chemistry laboratories.

Note: The polypropylene scintillation vial rack holds scintillation vials upright for storage, handling and sample preparation.

Note: The acrylic Petri dish rack keeps stacks of culture plates tidy during inoculation, incubation and storage in microbiology laboratories.

Note: The polycarbonate microcentrifuge tube rack holds 1.5 ml microcentrifuge tubes in numbered and lettered positions for molecular biology and biochemistry work.

Note: This Petri dish rack holds culture plates in stacks during inoculation, incubation and storage.

Note: RIA tubes of 12 x 75 mm are plain round tubes used in radioimmunoassay, coagulation and bacteriology work.

Note: This polypropylene rack stores scintillation vials upright while samples are prepared and handled.

Note: Set of four generic joints showing rheumatoid arthritis progression, supplied by JaincoLab. For teaching use only.

Note: Microscope reflecting mirror; size and mounting confirmed on the quotation.

Note: RF signal source, 100 kHz-30 MHz in eight bands, 400 Hz modulation at 30% depth, CW output.

Note: RF oscillator, approx. 3 MHz, high output, for Lecher wire and ultrasound experiments.

Note: RF oscillator, 200 kHz-280 MHz in seven bands, AM 400 Hz/1 kHz, automatic FM above 50 MHz, 0-200 mV output.

Note: Beta, gamma and alpha sources listed; details confirmed on the quotation.

Note: Four probe resistivity and band gap set-up with Ge crystal, oven, constant current supply and millivoltmeter.

Note: Series and parallel resistance apparatus with two moving-coil meters and printed circuit.

Note: RC low pass and high pass filter apparatus with three resistors and three capacitors.

Note: Two-stage RC coupled transistor amplifier apparatus with built-in regulated DC supply.

Note: RC coupled amplifier with inbuilt power supply and two AC millivoltmeters for input and output.

Note: Moulded rubber disc for sealing funnels and crucibles on filter flasks.

Note: The RF oscillators board is a panel for radio-frequency oscillator practicals, built around a PNP transistor with a variable gang condenser and an internally connected -9 V DC, 50 mA IC-regulated supply.

Note: Reduction adapter range from B14 cone / B10 socket up to B55 cone / B34 socket. Give the cone and socket sizes for each order line.

Note: Rubber ring available in white, black and red. State the colour, size and quantity when ordering.

Note: Neutral glass rolled rim vials with closure in 2, 3, 4, 6 and 8 dram sizes (7 to 28.25 ml).

Note: Neutral glass rolled rim vials with closures, 2 to 8 dram, 7.0 to 28.25 ml.

Note: Replacement sleeve with screw cap for a 6 mm stirrer shaft, size 14 thread.

Note: Redwood No. 1 is listed for oils up to 2000 seconds at the test temperature and Redwood No. 2 for oils above that. Thermometers IP 8C, IP 9C and IP 10C are extras.

Note: Rain gauge with metal collecting case and centimetre-calibrated plastic jar.

Note: Circle theorem manipulative with rubber bands and storage box.

Note: Roman numeral tile kit with student tiles and magnetic teacher tiles in a storage box.

Note: 25 mm steel ranging rod, orange and white, 2 m or 3 m, single or folding.

Note: Double-walled refrigerated liquid bath, 5-90 °C, 32 L; its control thermometer contains mercury.

Note: Digital temperature indicator-cum-controller and pyrometer available as options. Inner muffle size to be specified on order.

Note: Industrial rectangular muffle furnace in eight chamber sizes with energy regulator or optional PID control.

Note: Reciprocating shaking machine for Khan racks, bottles and flasks; 0-60 minute timer optional.

Note: Platform rotary shaker for flasks in four platform sizes; 0-60 minute timer optional.

Note: VDRL-type rotator for slide and card tests, with or without 0-15 minute timer.

Note: Refrigerated water bath, 0 to 90 °C, with digital controller, glass window and 500 x 250 x 250 mm stainless steel chamber.

Note: Rotary microtome for serial sections 1-50 microns in 1 micron steps, with hinged cover and safety device.

Note: Motor-driven single-cylinder respiration pump with stroke adjustable up to 250 cc for artificial ventilation of laboratory animals.

Note: Rat operating table with a top adjustable for inclination on its stand, for pharmacology and physiology practicals.

Note: Rotary kiln incinerator for industrial and domestic waste, with three ash-door chambers and digital temperature control.

Note: Laminated and full-colour 58 x 90 cm wall chart on the refraction of light through a rectangular glass slab with plastic rollers, for Class 10 science and Class 12 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on the refraction of light through a prism with plastic rollers, for Class 10 science and Class 12 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on the refraction of light through convex and concave lenses with plastic rollers, for Class 10 science and Class 12 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on radioactivity with plastic rollers, for Class 12 physics.

Note: Laminated and full-colour 58 x 90 cm wall chart on the radio telescope with plastic rollers, for Class 12 physics and school astronomy clubs.

Note: Laminated and full-colour 58 x 90 cm wall chart on the structure and types of RNA with plastic rollers, for Class 12 biology and B.Sc genetics.

Note: Laminated and full-colour 58 x 90 cm wall chart on renewable sources of energy with plastic rollers, for middle-school and secondary science.

Note: 70 x 100 cm wall chart on female reproductive system, for biology classes and paramedical and nursing courses.

Note: 70 x 100 cm wall chart on Raja Ramanna, for school science classrooms and laboratories.

Note: Laminated 50 x 75 cm wall chart on roller bandages with plastic rollers, for first aid training and school health education classes.

Note: Laminated 50 x 75 cm wall chart on removal of foreign bodies with plastic rollers, for first aid training and school health education classes.

Note: Laminated 50 x 75 cm wall chart on Roman numerals, for primary school mathematics classes.

Note: 70 x 100 cm wall chart on rocks and minerals, for middle and secondary school geography classes.

Note: Laminated and full-colour 50 x 75 cm wall chart on river landforms with plastic rollers, for secondary school geography classes.

Note: 50 x 75 cm wall chart on road traffic signs, for pre-primary and primary classes.

Note: 50 x 75 cm wall chart on the revolutionaries of the freedom struggle, for school history and social studies classes.

Note: Laminated 50 x 75 cm wall chart on national integration ("Reconciliation of Differences") with plastic rollers, for primary and middle school classes.

Note: Laminated 50 x 75 cm wall chart on the life of Rani Lakshmibai of Jhansi with plastic rollers, for school history and social studies classes.

Note: Laminated 50 x 75 cm wall chart on the life of Rabindranath Tagore with plastic rollers, for school history and social studies classes.

Note: Laminated 50 x 75 cm wall chart on rank badges with plastic rollers, for NCC, army and police training classes.

Note: 70 x 100 cm wall chart on the map of Rajasthan with plastic rollers, for school geography and social studies classes.

Note: Glass-barrel bottle top dispenser in seven ranges up to 400 ml, supplied by JaincoLab.

Note: Coloured ranging rod for marking survey lines, made by JaincoLab.

Note: Road measuring wheel with memory, supplied by JaincoLab.

Note: Roman numeral tiles for students and magnetic teacher tiles, in a storage box.

Note: Circle theorem ring with rubber bands in a reusable storage box.

Note: Rotary vacuum evaporator with digital water bath, speed regulator, RPM meter and motorised auto lift.

Note: Refrigerated heating and cooling circulator with built-in pump and stainless steel bath for external temperature control.

Note: Double-walled thermostatic water bath with stainless steel chamber and concentric rings, up to 100 °C.

Note: Half shadow research polarimeter with 0-360° circle, ISS sugar scale and sodium vapour lamp.

Note: Redwood efflux-time viscometer for oil viscosity; the detailed specification is confirmed on the quotation.

Note: Configuration is confirmed on the quotation.

Note: Chamber, source, detector and counting equipment are confirmed on the quotation.

Note: Base 200 x 125 mm (mild steel sheet, 5 mm, blue powder coated); rod 12 x 600 mm chrome plated; clamp 260 x 85 mm with boss head for rods up to 16 mm.

Note: Heavy 8x5 base of 5 mm mild steel sheet, blue powder coated; chrome-plated rod 600 mm x 10 mm. Clamps are ordered separately.

Note: CR sheet clamp with MS boss head; 2, 3 and 4 finger, aluminium die-cast and zinc pressure types are listed.

Note: High-quality rubber with low sulphur content. Supplied solid, one-hole or two-hole, in different sizes.

Note: Grey-coated revolving bosshead for retort stand assemblies; rod size range is confirmed on the quotation.

Note: Standard lengths 300, 500, 600, 750 and 1000 mm; rod diameter and thread are confirmed on the quotation.

Note: Zinc-plated ring with attached bosshead for retort stand rods; ring diameter is confirmed on the quotation.

Note: Textured powder coating; sizes 6 x 4 inch and 8 x 5 inch.

Note: Mineral testing kit for hardness, streak, magnetism and acid reaction tests; the acid drop bottle is supplied empty.

Note: Structural geology model of a reverse fault; size, material and base are confirmed on the quotation.

Note: Landform model of a river meander and oxbow lake; size, material and base are confirmed on the quotation.

Note: Rigid PVC 3D wall model of river action, 70 x 100 cm, with aluminium frame and hooks.

Note: Rigid PVC 3D wall model of rocks and volcanoes, 70 x 100 cm, with aluminium frame and hooks.

Note: Rotary microtome with ratchet feed, front feed indicator and automatic feed disengagement for sectioning biological specimens.

Note: Magnetic coloured rectangular fraction pieces from one whole to tenths.

Note: 4-part magnetic set on the area ratio of similar triangles.

Note: GI sheet rain gauge with plastic measuring cylinder.

Note: Ray box with optical lens set, accessories and manual.

Note: Metal ray box with 12 V lamp, slit plate and grooves for a cylindrical lens.

Note: Superior-type ray box with adjustable slits.

Note: Loose resistors, pack of 100; values on quotation.

Note: Superior plug-type resistance box, 100, 500 or 1000 ohms.

Note: Electronic-type resistance box, 50 to 1000 ohms.

Note: Economy plug-type resistance box, 50 to 1000 ohms.

Note: Single-dial decade resistance box, 0-1 to 0-1000 ohm ranges.

Note: Bakelite-cased resistance coils with bell terminals, 2 to 100 ohms.

Note: Bakelite-cased resistance coils with sockets, 1 to 100 ohms.

Note: Retort stand set: stand, 4-finger clamp and boss head.

Note: 8 x 5 in retort stand base with 600 or 450 mm rod.

Note: Four-finger aluminium die-cast retort clamp with rubber-covered jaws.

Note: Three-finger aluminium die-cast clamp with rubber jaws.

Note: Fisher-type burette clamp for one or two burettes, powder coated.

Note: Nichrome sliding rheostat, 10 to 100 ohms, bell terminals.

Note: Continuous constantan rheostat, 10 to 100 ohms.

Note: Solid rubber corks No. 2, 7 and 13, pack of 100.

Note: One-hole rubber corks No. 2, 7 and 13, pack of 100.

Note: Two-hole rubber corks No. 2, 7 and 13, pack of 100.

Note: Silicone rubber tubing, 5 mm, 10 m roll.

Note: Ripple tank in 22 x 22 inch and 15 x 15 inch sizes, with vibrator, light source and power supply, for wave demonstrations.

Note: Natural rubber cone for filtration flask set-ups, shore hardness 45, -30 to 70°C.

Note: Digital Brix refractometer, 0 to 85% Brix, 0.2% accuracy, automatic temperature compensation.

Note: Ragg type tuning fork in blue steel; frequencies confirmed on the quotation.

Note: Reference card cabinet with rod-and-plate card drawers and restraining lever.

Note: Kail wood reprint boxes with inner clamp and outer card holder.

Note: Regulated variable power supply, 0-30 V / 1 A, short-circuit protected.

Note: Retort rod in iron, chrome-plated iron or stainless steel, five sizes.

Note: Round PTFE stirring bar with pivot ring and Alnico V magnet.

Note: Red and blue litmus paper, 100 strips each, resealable vials.

Note: Respirometer with graduated U-manometer, control thermo-barometer tube, wire basket and 1 mL syringe.

Note: Three-ball inspiratory breathing exerciser for teaching; dismantles for cleaning, supplied non-sterile and boxed.

Note: Teaching model depicting skeletal deformities of rickets (vitamin D deficiency) for nutritional deficiency pathology classes.

Note: Teaching model depicting structure of a rhabdovirus for virus structure classes.

Note: Reading telescope with 23 mm achromatic objective, 8x Ramsden eyepiece and rack and pinion focusing.

Note: Amber borosilicate glass reagent bottle for light-sensitive chemicals, in several capacities.

Note: Iron retort ring with boss head and plastic knob, in sizes 50 to 150 mm.

Note: Borosilicate glass round bottom flask with joint, in different capacities; jointless version also available.

Note: Rubber hammer, 16 oz, about 300 mm long, with wooden handle.

Note: Monocular round table microscope with mechanical stage and NA 1.25 Abbe condenser.

Note: Wall-mounted rubber-in-shear apparatus with dial gauge for modulus of rigidity experiments.

Note: Assorted elastic rubber bands, about 1000 per pack.

Note: Retort stand bases in three sizes, each listed with a matching rod length and diameter.

Note: Upright retort stand rods of 12 mm diameter in 100 cm and 50 cm lengths.

Note: Ring support for a retort stand rod. Size is confirmed on the quotation.

Note: Stand clamp with a plated metal thumb screw on the jaws.

Note: Colour-coded construction model of nucleic acid structure with 145 parts.

Note: Large wide-mouth borosilicate reagent bottles, 1000 ml and 2000 ml, with dust-proof stoppers.

Note: Closed retort rings: 70 mm ID on a 140 mm stem, and 75 mm with boss head.

Note: Single-tube sliding rheostat, 11 ohm, 3 A.

Note: Student ray box kit with 220 V ray box, bulb, slits and accessories for lens experiments.

Note: How a biological structure relates to the function it performs for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Enlarged rat dissection model showing the vital organs, mounted on a base.

Note: Plant root model about 300x in durable plastic, LS and TS, 2 parts, on a base with numbered key card.

Note: The mechanisms that control whether and how much a gene is expressed for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The gene cloning steps used to make recombinant DNA for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Speed 2,000 to 16,000 rpm; cooling to -8°C (PID controller); 0-15 min timer with LCD; SS bowl 9 inch; angle rotor heads for polypropylene micro centrifuge tubes.

Note: The key laboratory tests used to assess kidney function for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The reticuloendothelial system of phagocytic cells in the liver, spleen and bone marrow for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Maximum speed depends on rotor size (about 16,000 rpm on a 1.5/2 ml head). Supplied with instruction manual, cord and plug for 220 V, 50 Hz, single phase AC.

Note: Maximum 20,000 rpm; brushless automatic balanced motor; digital temperature controller cum indicator with CFC-free refrigerant; electronic safety lid lock and imbalance detector.

Note: The distinct roles of T and B lymphocytes in adaptive immunity for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The developmental cycle of Chlamydia for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: The stages of the virus replication cycle for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: How DNA viruses replicate for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.

Note: Weiber rectangular horizontal autoclave supplied by JaincoLab; chamber size, rating and fittings are confirmed on the quotation.

Note: Red and white ranging rod with pointed shoe, made by JaincoLab for surveying.

Note: Five-stage RO unit removing 80-90% of dissolved salts from raw water.

Note: Tray-type rotary shaker (VDRL rotator), 300 x 300 mm, up to 180 RPM; timer optional.

Note: Orbital flask shaker for 50-1000 ml conical flasks, about 50 mm orbit, speed controlled.

Note: Belt-driven rotary vacuum pump, 0.25 HP, 400 RPM, on a steel base with belt guard.

Note: Reverse laminar flow station that draws powder aerosols away from the operator during sampling and dispensing.

Note: Cambridge type rocking microtome, 2-24 micron sections in 2 micron steps, with holders, razor and cover.

Note: Erma type rotary microtome, up to 25 microns in 1 micron steps, with razor and holders.

Note: Apparatus for testing inhaled and exhaled air in small organisms. Construction and contents are confirmed on the quotation.

Note: Compact respirometer for comparing gas uptake or release by small organisms during respiration.

Note: Reaction timer for light, sound and touch response activities, supplied by JaincoLab.

Note: Redox and corrosion investigation kit for a class of 40 students.

Note: Microslide set of eight labelled 35 mm photomicrographs on the respiratory system, supplied by JaincoLab.

Note: Dissectible model of the human right lung, made by JaincoLab.

Note: Respiratory system model with bronchial tree and sectioned alveolus, supplied by JaincoLab.

Note: Chrome-plated reading glass magnifier, 5/10 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Chrome-plated reading glass magnifier, 6/15 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Chrome-plated reading glass magnifier, 6/20 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Chrome-plated reading glass magnifier, 7.5/15 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Chrome-plated reading glass magnifier, 7.5/20 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Chrome-plated reading glass magnifier, 10/15 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Chrome-plated reading glass magnifier, 10/20 cm, with metal frame and bakelite handle, made by JaincoLab.

Note: Classroom activity kit on rocks and soils; contents confirmed on the quotation.

Note: Self-assembly 24-base RNA molecular model kit, supplied by JaincoLab.

Note: Rimmed glass test tube for micro science kits; size confirmed on the quotation.

Note: Self-assembly 12-base RNA molecular model kit, supplied by JaincoLab.

Note: Raised relief map of the Moon's near and far sides with landing sites, 22 x 34 in.

Note: 600 mm vinyl Clever Catch ball with 95 recycling questions.

Note: Length 165 mm. Shaped ends grip the source by the peg or the body.

Note: Spare rheostat component for the Electricity Circuits Kit, mounted on a sturdy panel. The resistance range is confirmed on the quotation.

Note: Kit of 15 rock specimens, five of each rock type.

Note: Introductory rock kit with 15 rocks, activity guide and magnifier.

Note: 24 rock and rock-forming mineral specimens with study guide.

Note: Resistance 1 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Resistance 10 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Resistance 100 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Resistance 2 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Resistance 20 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Translucent school rain gauge, 210 x 100 mm, calibrated in mm and inches, with rainfall chart.

Note: Resistance 5 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Resistance 50 ohm; connects with 4 mm plug leads. Tolerance and power rating are confirmed on the quotation.

Note: Resistance 1600 ohm. The current rating is confirmed on the quotation.

Note: Spare glass measuring cylinder for the BA pattern rain gauge.

Note: Resistance 125 ohm. The current rating is confirmed on the quotation.

Note: Resistance 1325 ohm; maximum current 0.5 A.

Note: Resistance 135 ohm. The current rating is confirmed on the quotation.

Note: Resistance 16 ohm. The current rating is confirmed on the quotation.

Note: Resistance 2.5 ohm. The current rating is confirmed on the quotation.

Note: Resistance 20 ohm. The current rating is confirmed on the quotation.

Note: Resistance 280 ohm. The current rating is confirmed on the quotation.

Note: Resistance 300 ohm. The current rating is confirmed on the quotation.

Note: Resistance 37 ohm. The current rating is confirmed on the quotation.

Note: Resistance 4.5 ohm. The current rating is confirmed on the quotation.

Note: Resistance 56 ohm. The current rating is confirmed on the quotation.

Note: Resistance 600 ohm. The current rating is confirmed on the quotation.

Note: Resistance 8.5 ohm. The current rating is confirmed on the quotation.

Note: Red 4 mm stackable plug lead, 500 mm long, with a current carrying capacity of 16 A maximum.

Note: Red 500 mm test lead with a shrouded crocodile clip and a 4 mm stackable connector; also available in black.

Note: Red 500 mm banana plug test lead with a 4 mm stackable connector at each end; also available in black.

Note: Refill for the Radiation Effects on Plant Growth kit, supplied by JaincoLab.

Note: Rotating protractor for measuring the directivity of microwave transmission.

Note: Two telescoping metal tubes on a removable base; air column adjustable from 300 mm to 530 mm.

Note: Ripple tank with screen projection, included 12 V 5 A DC supply, aluminium case and manual.

Note: Reed relay switch for capacitor charge-discharge experiments, driven from a power signal generator at 5 to 400 Hz. Contact rating 12 V, 10 mA with a 12 ohm protective resistor.

Note: Lightweight red laser pen with a latching button that stays on until pressed again.

Note: Clear, polished rectangular acrylic prism (block) for refraction experiments.

Note: Clear, polished acrylic; size confirmed on the quotation.

Note: Eight filters per set, each in a 50 x 50 mm plastic frame.

Note: Supplied with a pair of slits but without colour filters.

Note: Slit plates and colour filters fit the vertical channels in every aperture.

Note: Supplied with two slit plates and two blanking plates for unused apertures.

Note: Runs on 12 V AC or DC through two 4 mm sockets; the power supply is confirmed on the quotation.

Note: Disc and lamp house both rotate and hold in any position.

Note: Magnets on each optical element hold it on the disc.

Note: Set of six 300 x 3 mm rods in brass, copper, iron, lead, zinc and aluminium for comparing thermal conduction.

Note: Dial decade resistance box, manganin (Grade A) or constantan (Grade B) coils, teak wood box.

Note: Rotary-switch substitution box, 12 preferred-value resistors from 100 ohm to 470 kilo-ohm.

Note: P.O. box on a 12 mm brass block with constantan coils, listed accuracy +0.1%.

Note: P.O. box with 14 mm brass blocks in both columns, +/-0.02% to 0.005%; manganin-coil versions listed.

Note: Single tube rheostat on a vitreous enamelled steel tube, 4.4 cm and 5.6 cm versions, socket terminals.

Note: Single-phase rheostat bank, 250 V AC 50 Hz, porcelain tubes, Ni-Cu or Ni-Cr windings, ventilated box.

Note: Life-size colour-coded regional brain on a plastic base, supplied by JaincoLab. For teaching use only.

Note: Ripple tank demonstration set with barriers for reflection, refraction, diffraction and interference of water waves; tank size and accessories are itemised on the quotation.

Note: Single hole; sizes in bottom x top x length: 15 x 18 x 24, 12 x 17.5 x 25.7, 21.3 x 25.5 x 24.7 and 21 x 26.5 x 27.5 mm.

Note: Hand reamer for 4 mm holes, 4.2 mm drill on handle.

Note: Polished perspex rectangular prism, 70 x 50 mm.

Note: Pack of 50 rubberised wheels for model vehicles.

Note: The radial arm saw is a cross-cutting saw with the blade carried on an arm above the table, for cutting boards to length and mitring in carpentry training.

Note: The radial cross cutting machine is a heavy radial saw for cross-cutting and trimming timber in joinery workshops.

Note: The round file is a hand file for enlarging holes and filing curved surfaces in metal fitting practice.

Note: Mercury-free wall room thermometer, -40 to 50°C, white plastic body.

Note: The rammer is an engine-driven tamping rammer for compacting soil and fill on construction sites and in site-practice training.

Note: The rivet gun is an all-steel hand riveter for fastening sheet metal and heavy fabric in ductwork, construction and auto body practice.

Note: Robotic total station with automatic prism aiming, supplied by JaincoLab.

Note: Rebound hammer for concrete and rock, 10-70 N/mm2, supplied with a calibration anvil and carrying case.

Note: Electronic Rockwell hardness tester for metals; supplied by JaincoLab.

Note: Wall-mounted rope friction apparatus with interchangeable V-groove pulleys.

Note: The reciprocating spindle surface grinder is designed for quick flat grinding of workpieces, with a hydraulically driven table and a spindle drive of 1.5 to 3.75 kW depending on the model.

Note: The radial drilling machine carries its drill head on a swinging arm so that holes can be drilled across a large workpiece without moving it, with electro-hydraulic clamping of the drill head, arm and sleeve.

Note: Rotameter calibration apparatus with 20 mm and 25 mm rotameters.

Note: Reciprocating pump test rig with double acting pump and air vessel.

Note: Heavy radial drilling machine with 2 m arm for workshop training; supplied by JaincoLab.

Note: 60 kVA resistance butt welding machine with pneumatic clamping; supplied by JaincoLab.

Note: Five-joint robotic arm trainer for learning robot programming, motor control and automation basics; supplied by JaincoLab.

Note: Hand riveter for 3-5 mm pop rivets; supplied by JaincoLab.

Note: Five hardened steel rivet sets, 4-12 mm, in a wooden stand; supplied by JaincoLab.

Note: Hand riveting kit with nose pieces and five boxes of rivets in a plastic case; supplied by JaincoLab.

Note: Self-contained reverse osmosis and ultrafiltration membrane unit; supplied by JaincoLab.

Note: Drive-assembly trainer listed as Rack and Pinion; component list on the quotation; supplied by JaincoLab.

Note: Packed bed residence time distribution apparatus; supplied by JaincoLab.

Note: Teaching model of a steam locomotive reversing gear; size and construction on the quotation; manufactured by JaincoLab.

Note: Rotary dryer apparatus for drying characteristics experiments; supplied by JaincoLab.

Note: 300 mm single-cut high-carbon steel round file with grip; supplied by JaincoLab.

Note: Laminated and full-colour 58 x 90 cm wall chart on root systems in plants with plastic rollers, for middle-school science and Class 11 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on reproduction in plants with plastic rollers, for middle-school science and Class 10 to 12 biology.

Note: Laminated and full-colour 58 x 90 cm wall chart on the modifications of roots with plastic rollers, for Class 11 biology and B.Sc botany.

Note: 200 mm rebate and fillister plane, 12 mm cutting width; supplied by JaincoLab.

Note: Laminated and full-colour 58 x 90 cm wall chart on the regions of a root tip with plastic rollers, for Class 11 biology and B.Sc botany.

Note: Capacity 500 g / 5 N; dual scale in grams and newtons.

Note: Stopwatch and data acquisition equipment are not included.

Note: Rigging training system with 1-ton rated gantry crane, hoists and slings; supplied by JaincoLab.

Note: Roller-pack bearing machine tool axis training add-on; supplied by JaincoLab.

Note: Reverse osmosis and ultrafiltration membrane pilot plant; supplied by JaincoLab.

Note: The Radio Communication Training System is a modular programme for studying radio communication, taking students from basic RF principles to advanced concepts in an organised way.

Note: Panel-based training system for wiring refrigeration and air conditioning controls, compressors and motors; supplied by JaincoLab.

Note: Air conditioning trainer with air recirculation for building-type system studies; supplied by JaincoLab.

Note: Refrigeration cycle demonstration unit for refrigeration and thermodynamics courses; supplied by JaincoLab.

Note: Instrumented vapour compression refrigeration unit for performance experiments; supplied by JaincoLab.

Note: Real-time simulators for training technicians on air conditioning and refrigeration system operation; supplied by JaincoLab.

Note: Refrigerant recovery and charging station for workshops and training labs; supplied by JaincoLab.

Note: Materials and components for refrigeration and air conditioning practical exercises; supplied by JaincoLab.

Note: Welded steel rotating engine stands for engine training stations; supplied by JaincoLab.

Note: Stiff static and dynamic loading systems for laboratory rock mechanics testing.

Note: Apparatus for maximum and minimum index density of sands and gravels.

Note: Resonant column apparatus for small-strain shear modulus and damping of soils.

Note: Riffle sample divider for aggregates, sand and fillers; supplied by JaincoLab.

Note: Portable rheometer for self-compacting concrete; supplied by JaincoLab.

Note: Rebar and wall tie locator with three heads; supplied by JaincoLab.

Note: Small-scale reaction turbine demonstration unit for use on a turbine service unit, supplied by JaincoLab.

Note: Made as per DepEd guidelines. Used as a path rail for motorized and dynamics carts in motion experiments.

Note: Made as per DepEd guidelines. Used to support glassware during heating activities.

Note: Made as per DepEd guidelines. Demonstrates regular polygons from 7-sided to 12-sided.

Note: As per DepEd guidelines. Transparent dual-scale student ruler with permanent prints.

Note: As per DepEd guidelines. Clear, non-toxic plastic plate with six round wells.

Note: As per DepEd guidelines. Narrow-mouth amber reagent bottle with octagonal plastic stopper.

Note: As per DepEd guidelines. Clear borosilicate wide-mouth bottle with no-drip pour lip.

Note: As per DepEd guidelines. SBR rubber stopper with one 5 mm hole.

Note: As per DepEd guidelines. One-hole stopper for narrow-mouth 250 mL Erlenmeyer flasks.

Note: As per DepEd guidelines. Two-hole stopper for narrow-mouth 250 mL Erlenmeyer flasks.

Note: As per DepEd guidelines. At least 24 samples, individually bagged and numbered.

Note: Made as per DepEd guidelines. Channel-type plastic board, free of warpage.

Note: Made as per DepEd guidelines. Stainless steel chain keeps the ball captive during heating.

Note: Made as per DepEd guidelines. Strobe synchronised to the rippler frequency controller.

Note: Made as per DepEd guidelines. Scale print resists rubbing and fading.

Note: Demonstration radiometer (light mill), up to 2,900 rpm.

Note: Rutherford alpha-scattering chamber with Po-210 source and alpha-sensitive film.

Note: String vibrator (Melde type) with bench clamp and pulley, aluminium resonance tube, sound box and speaker.

Note: Ripple tank with vibration generator, dippers, projection mirror and screen, Perspex shapes.

Note: Biuret reagent, analytical reagent, 250 ml.

Note: Fixed carbon film resistors in assorted values for circuit practicals.

Note: Open slide wire rheostat with oxidised copper-nickel winding, various ratings.

Note: Dissected rabbit preserved in formalin, in a closed glass container.

Note: Ruhmkorff induction coil, 30 mm spark, moulded plastic base.

Note: Laminated wall chart of the respiratory system, 70 x 100 cm.

Note: 250 ml borosilicate round bottom flask, 140 mm high.

Note: Clear 500 ml borosilicate reagent bottle, 85 x 176 mm.

Note: 500 ml amber narrow-mouth borosilicate reagent bottle.

Note: 250 ml narrow-mouth amber borosilicate reagent bottle.

Note: 250 ml amber glass reagent bottle, 70 x 138 mm.

Note: 3-prong universal clamp with boss head, up to 58 mm, 22 cm long.

Note: Red rubber laboratory tubing; bore and length confirmed on the quotation.

Note: Assorted solid red rubber stoppers, no holes.

Note: Classroom projector with 24 V halogen lamp; model confirmed on the quotation.

Note: Natural and vulcanised rubber samples for comparison.

Note: Compact limestone specimen; size confirmed on the quotation.

Note: Full rock specimen collection; specimen list confirmed on the quotation.

Note: Natural rubber lab tubing, 6 mm ID x 9 mm OD.

Note: One-hole rubber stoppers, bottom diameters 11 to 15 mm.

Note: Solid rubber stoppers, bottom diameters 11 to 15 mm.

Note: 100 ml borosilicate round bottom flask with long neck.

Note: 250 ml borosilicate round bottom flask with long neck.

Note: 500 ml borosilicate round bottom flask with long neck.

Note: Straight Liebig condenser, 480 mm, borosilicate glass.

Note: Red phosphorus, analytical reagent, 50 g, with MSDS.

Note: Red litmus paper for testing bases.

Note: Cylindrical metal rods (zinc, copper, iron, aluminium and others) for comparing metals.

Note: Stainless steel right angle clamp for laboratory stand rods.

Note: Resistance coils in round cases with captive-head terminals for physics circuit practicals.

Note: Protein synthesis model with DNA, mRNA and tRNA bases, amino acids and phosphate strands on a wooden frame.

Note: Root model in longitudinal and transverse section showing apical-cell growth, detachable crown.

Note: 24-place polycarbonate micro centrifuge tube rack, autoclavable, stackable, indexed holes.

Note: Reflex arc teaching model; details confirmed on the quotation.

Note: 1000 ml graduated borosilicate reagent bottle with screw closure.

Note: 500 ml graduated borosilicate reagent bottle with screw cap.

Note: 250 ml graduated borosilicate reagent bottle with screw closure.

Note: Individually wrapped stainless steel scalpel blades for No. 4 style handles.

Note: Cat. No. JSS-315/057; wooden base.

Note: Cat. No. JSS-319/058; weight 1.8 kg.

Note:

Note: Catalogue No. JSS-331/064; pH 1 to 14, 5 m roll.

Note: Root pressure demonstration kit; parts confirmed on the quotation.

Note: Ferrite; outside diameter 17.5 mm; inside diameter 7.5 mm; thickness 3 mm.