You have searched for products starting with "S"

The polypropylene stopcock with PTFE plug is an in-line tap for flexible tubing, used to open, close or divert the flow of gas, water or vacuum on a laboratory bench.
Note: The polypropylene stopcock with PTFE plug is an in-line tap for flexible tubing, used to open, close or divert the flow of gas, water or vacuum on a laboratory bench.
View Details
The stool container with spoon cap is a 25 ml sample container whose cap and spoon are moulded as a single piece. The specimen is picked up with the spoon and the container is closed in the same movement, so no separate spatula is needed.
Note: The stool container with spoon cap is a 25 ml sample container whose cap and spoon are moulded as a single piece.
View Details
The press and fit sample container is a disposable polypropylene container for collecting sputum, urine and similar specimens in pathology, teaching and research laboratories.
Note: The press and fit sample container is a disposable polypropylene container for collecting sputum, urine and similar specimens in pathology, teaching and research laboratories.
View Details
The transparent specimen jar is a tall, clear jar with a tight-fitting cap, used in biology and zoology laboratories to preserve and display specimens.
Note: The transparent specimen jar is a tall, clear jar with a tight-fitting cap, used in biology and zoology laboratories to preserve and display specimens.
View Details
The polypropylene spatula with spoon is a double-ended laboratory spatula: one end is a spoon for drawing salts from containers, and the other is flat with a knife edge for breaking up crystals of different salts.
Note: The polypropylene spatula with spoon is a double-ended laboratory spatula: one end is a spoon for drawing salts from containers, and the other is flat with a knife edge for breaking up crystals of different salts.
View Details
Polypropylene stirring rods are plain stirrers for mixing solutions in beakers and flasks in school, college and research laboratories.
Note: Polypropylene stirring rods are plain stirrers for mixing solutions in beakers and flasks in school, college and research laboratories.
View Details
The polypropylene square storage box is a lidded container for keeping powdered reagents and other materials in chemistry, pharmacy and school laboratories.
Note: The polypropylene square storage box is a lidded container for keeping powdered reagents and other materials in chemistry, pharmacy and school laboratories.
View Details
The polypropylene simple cell pot is a clear container for building simple cells and similar electrochemistry set-ups in school and college physics and chemistry practicals.
Note: The polypropylene simple cell pot is a clear container for building simple cells and similar electrochemistry set-ups in school and college physics and chemistry practicals.
View Details
The polypropylene separatory funnel holder supports a separatory funnel on a stand rod during solvent extraction. Its front opening gives a clear view of the liquid layers and lets the funnel be placed and removed without obstruction.
Note: The polypropylene separatory funnel holder supports a separatory funnel on a stand rod during solvent extraction.
View Details
The slide mailer is a polypropylene case for carrying prepared microscope slides safely from one place to another, for example between laboratories or to an examiner. It is listed in four sizes, holding 1, 2, 5 or 10 slides (SKU JA-SA-102).
Note: The slide mailer is a polypropylene case for carrying prepared microscope slides safely from one place to another, for example between laboratories or to an examiner.
View Details
The microscope slide box stores 1 x 3 inch slides in a compact, durable box with a numbered index in the base, so each slide can be found quickly.
Note: The microscope slide box stores 1 x 3 inch slides in a compact, durable box with a numbered index in the base, so each slide can be found quickly.
View Details
The 100 slide storage rack is an ABS rack with a transparent cover for filing up to 100 microscope slides with numeric indexing.
Note: The 100 slide storage rack is an ABS rack with a transparent cover for filing up to 100 microscope slides with numeric indexing.
View Details
The polypropylene gel staining box is used for staining, fixing, de-staining and handling fragile electrophoresis gels and membranes.
Note: The polypropylene gel staining box is used for staining, fixing, de-staining and handling fragile electrophoresis gels and membranes.
View Details
Sterile soft loops are non-toxic, disposable inoculation loops for transferring and streaking samples in microbiology. Each loop holds a set volume, so it doubles as a semi-quantitative measure.
Note: Sterile soft loops are non-toxic, disposable inoculation loops for transferring and streaking samples in microbiology.
View Details
The storage vial is a small sample vial for keeping biological material, including animal and human cells, in research and clinical laboratories.
Note: The storage vial is a small sample vial for keeping biological material, including animal and human cells, in research and clinical laboratories.
View Details
The storage vial with O-ring is a 2.0 ml vial whose cap carries an O-ring for a leakproof seal. Like the other storage vials in this range, it can be used for storage at temperatures as low as -190 ยฐC.
Note: The storage vial with O-ring is a 2.0 ml vial whose cap carries an O-ring for a leakproof seal.
View Details
The HDPE scintillation vial is an unbreakable high density polyethylene vial with a leakproof screw cap, used with standard liquid scintillation counting equipment. It is suited to low activity counts.
Note: The HDPE scintillation vial is an unbreakable high density polyethylene vial with a leakproof screw cap, used with standard liquid scintillation counting equipment.
View Details
Life-size shoulder joint model (SKU JA-HM-148) on a stand, 17.5 x 15 x 21 cm, with flexible artificial ligaments; demonstrates abduction, adduction, anteversion, retroversion and internal and external rotation.
Note: Life-size functional shoulder joint on a stand with flexible artificial ligaments; 17.5 x 15 x 21 cm.
View Details
Stomach model (SKU JA-AM-171) in hard plastic at twice natural size: a moderately distended stomach in longitudinal section showing gastric folds, the pyloric valve and sphincter muscles and the mucosa.
Note: Hard plastic stomach at 2x natural size in longitudinal section.
View Details
Enlarged skin model (SKU JA-AM-183) in PVC on a base, magnified 105 times, showing the three layers of human skin with a hair follicle, sweat gland and fatty tissue, viewable from the front, side and back.
Note: PVC skin section magnified 105 times on a base, showing the three skin layers.
View Details
Skin block model (SKU JA-AM-184): a three-dimensional block section of skin enlarged 70 times, showing hair follicles, sebaceous and sweat glands, sensory receptors, nerves and blood vessels.
Note: Three-dimensional skin block enlarged 70 times with glands, receptors, nerves and vessels.
View Details
Surgical Suture Leg (SKU JA-NTM-243): leg trainer with elastic, flexible skin and initial wounds for practising incision, suturing, stitch removal and bandaging, with room for new incisions.
Note: Suturing practice leg with elastic skin, supplied by JaincoLab. For training use only.
View Details
Sectional Knee Joint Model (SKU JA-OM-284): rigid life-size knee with bone in cross-section showing articular disc, articular cartilage, synovial membrane and capsular ligament, colour-coded.
Note: Rigid life-size sectional knee joint, colour-coded, supplied by JaincoLab. For teaching use only.
View Details
Shoulder With Muscles And Spines Model (SKU JA-OM-293): teaching model for understanding the structure of the shoulder with its muscles; size, parts and material are confirmed on the quotation.
Note: Shoulder with muscles teaching model; details confirmed on the quotation.
View Details
Suture Practice Pad (SKU JA-EM-326): soft tissue pad with a feel and stretch-and-tear resistance similar to real tissue, for practising suturing skills in demonstrations and courses.
Note: Soft tissue suture practice pad, supplied by JaincoLab. For training use only.
View Details
Student Microscope (SKU JA-M-858): monocular straight tube, 75 x 85 mm fixed stage with clips, 25 mm plano-concave mirror, achromatic 10x objective, Huygenian 10x and 15x eyepieces.
Note: Monocular student microscope, 10x objective, 10x and 15x eyepieces, mirror illumination.
View Details
Stereoscopic Microscope (SKU JA-M-884): 45-degree binocular head, rack and pinion focus, 20x and 40x flat field from 2x and 4x objective pairs, two-lamp transmitted and incident illuminator.
Note: Binocular stereoscopic microscope, 20x and 40x, transmitted and incident light.
View Details
Stereoscopic Zoom Binocular and Trinocular Microscope (SKU JA-M-886): stereo zoom microscope in binocular or trinocular versions for dissection and specimen study. Zoom range and optics confirmed on the quotation.
Note: Stereo zoom microscope, binocular or trinocular; specifications confirmed on the quotation.
View Details
Stage Micrometer (SKU JA-M-914): calibration scale on a glass disc in a black anodised aluminium slide, 75 x 24 x 2 mm, for calibrating light microscopes. Supplied by JaincoLab.
Note: Stage micrometer, glass disc scale in a 75 x 24 x 2 mm aluminium slide.
View Details
Senior Dissecting Microscope (SKU JA-M-928): heavy round base, rack and pinion focusing, revolving lens arm, 85 x 75 mm glass-plate stage, plano-concave reflector and 10x and 20x eyepieces.
Note: Senior dissecting microscope, 85 x 75 mm glass stage, 10x and 20x eyepieces.
View Details
Student School Microscope (SKU JA-M-934): monocular straight tube, 75 x 85 mm stage with clips, 25 mm plano-concave mirror, achromatic 10x objective, Huygenian 10x and 15x eyepieces for school labs.
Note: Monocular school microscope with mirror, 10x objective, 10x and 15x eyepieces.
View Details
Student Stereo Microscope (SKU JA-M-937): straight binocular head with interpupillary adjustment, clips and reversible black and white plate, fixed 2x or 3x achromatic objectives, WF 10x or 15x eyepieces.
Note: Binocular student stereo microscope, 2x or 3x objectives, WF 10x or 15x.
View Details
Student Compound Microscope (SKU JA-M-938): 160 mm monocular tube inclinable to 90 degrees, triple nosepiece, achromatic 10x and 40x, 120 x 120 mm stage, 50 mm mirror, choice of eyepieces.
Note: Monocular student compound microscope, 10x and 40x objectives, 50 mm mirror.
View Details
Student Projection Microscope (SKU JA-M-939): 160 mm monocular tube, triple nosepiece, 4x, 10x and 40x SL, 10x and 15x eyepieces, mechanical stage, 20 W halogen, 150 mm rotating glass projection screen.
Note: Student projection microscope with 150 mm rotating glass screen.
View Details
Student Medical Microscope (SKU JL-MLE-941): die-cast stand, quadruple nosepiece, 10x, 40x and 100x oil objectives, 120 x 120 mm mechanical stage, 50 mm mirror or optional lamp, for training labs.
Note: Teaching microscope with 100x oil objective and mechanical stage.
View Details
Shop Microscope (SKU JA-M-1001): dual scale eyepiece reticle graduated in inches and millimetres, rotatable through 360 degrees, rack and pinion focusing and a battery-operated pen light illuminator.
Note: Portable shop microscope with a rotating inch and millimetre reticle, rack and pinion focusing and battery pen light illumination.
View Details
Battery-operated sound level meter for measuring sound pressure from 50 dB to 110 dB; the picked-up sound is amplified and attenuated and shown on a moving-coil meter calibrated in decibels.
Note: Battery-operated sound level meter, 50-110 dB, with a moving-coil meter calibrated in decibels.
View Details
Stroboscope for showing the stroboscopic effect and measuring the speed of rotating parts without touching the shaft; 100 to 10,000 RPM on a calibrated dial; mains operated with optional battery working.
Note: Stroboscope for non-contact speed measurement, 100-10,000 RPM, calibrated dial, mains operated (battery optional).
View Details
Signal tracer for locating faults in radio receivers: RF probe covering 100 kHz to 30 MHz for RF and IF signals, audio output up to 5 W, supplied complete with AF and RF probes and loudspeaker; 220 V.
Note: Signal tracer with AF and RF probes (RF 100 kHz-30 MHz), loudspeaker and 5 W audio output; 220 V.
View Details
Scintillation counter supplied by JaincoLab for detecting and measuring ionising radiation in nuclear physics practicals; detector, counter and accessory specifications are confirmed on the quotation.
Note: Scintillation counter for detecting and measuring ionising radiation.
View Details
Mounted silicon solar cell giving an output of 1 V at 200 mA through 4 mm sockets, for photo-voltaic effect and solar cell experiments.
Note: Mounted silicon solar cell, 1 V at 200 mA, 4 mm socket output.
View Details
Apparatus for drawing the V and I characteristics of a solar cell: mounted solar cell, lamp house with power supply, moving-coil meters on a panel with power supply, and connecting leads.
Note: Solar cell V-I characteristics apparatus with mounted cell, lamp house and panel meters.
View Details
Apparatus for plotting the anode current against anode-cathode voltage of an SCR: 0-3 V DC 50 mA and 0-150 V DC supplies, three meters, SCR on the panel with connections on terminals; 15 x 8 x 4 in.
Note: SCR V-I characteristics apparatus with 0-3 V and 0-150 V DC supplies and three meters.
View Details
Apparatus for the forward and reverse characteristics of a PN junction diode: 0-50 V DC 2 mA and 0-1 V DC 200 mA supplies, two meters, diodes mounted with connections on terminals; 10 x 8 x 4 in.
Note: PN junction diode forward and reverse characteristics apparatus with two DC supplies and two meters.
View Details
Apparatus for the magnetic susceptibility of an FeCl3 solution: 7.5 kG electromagnet, 0-100 V 4 A variable power supply, digital gauss meter 0-20 kG with Hall probe, and graduated capillary tube with stand.
Note: Susceptibility apparatus with 7.5 kG electromagnet, supply, digital gauss meter and graduated capillary.
View Details
Apparatus for verifying Stefan's law with an electric bulb: one 6 V tungsten filament bulb, voltmeter and ammeter for filament voltage and current, and built-in variable power supply.
Note: Stefan's law apparatus with 6 V bulb, voltmeter, ammeter and variable supply.
View Details
Apparatus for the frequency response, input and output impedance and negative feedback of common base, common emitter and common collector transistor amplifiers: components on the front panel, test points on terminals; 8 x 6 x 3 in.
Note: Transistor amplifier apparatus for common base, common emitter and common collector configurations.
View Details
Apparatus for studying the effect of negative feedback on a transistor amplifier, with voltage gain named as the quantity studied; circuit details are confirmed on the quotation.
Note: Negative feedback transistor amplifier apparatus; voltage gain studied.
View Details
Operational amplifier apparatus for unity gain buffer, non-inverting, inverting, summing and difference amplifier circuits, with three regulated DC supplies of 0 to +/-15 V and 0 to 6 V.
Note: Op-amp study apparatus for five amplifier configurations, with three regulated DC supplies.
View Details
Apparatus for the basic characteristics of an op-amp (input offset current, input offset voltage, slew rate, bandwidth, null balancing): IC 741 wired with resistors and capacitors, +/-15 V DC regulated supply, two round meters, 4 mm sockets.
Note: IC 741 op-amp characteristics apparatus with +/-15 V regulated supply and two meters.
View Details
Apparatus for an op-amp as adder, subtractor, integrator and differentiator: two DC regulated supplies of 0-5 V plus a fixed +/-15 V supply, two dual-range round meters, R and C components on the front panel.
Note: Op-amp adder, subtractor, integrator and differentiator apparatus with regulated supplies and two meters.
View Details
Apparatus for studying an operational amplifier as a differentiator and as an integrator; supply, meters and component values are confirmed on the quotation.
Note: Op-amp differentiator and integrator apparatus; circuit details confirmed on the quotation.
View Details
Apparatus for studying an operational amplifier as a Schmitt trigger, which fires at a set threshold and switches between two output levels; supply and meter details are confirmed on the quotation.
Note: Op-amp Schmitt trigger apparatus; supply and meter details confirmed on the quotation.
View Details
Apparatus for an op-amp sine to square wave converter using a single-supply comparator as a zero-crossing detector; a sine input with -5 V and +5 V peaks is shifted to 0-5 V by a voltage divider before comparison.
Note: Op-amp sine to square wave converter using a single-supply zero-crossing comparator.
View Details
Apparatus for an operational amplifier as a square to triangular and triangular to square wave converter, with a DC regulated power supply and the circuit diagram printed on the front panel with the components mounted on it.
Note: Op-amp square-to-triangular and triangular-to-square wave converter apparatus with DC regulated supply.
View Details
Apparatus for studying an operational amplifier as a clipping circuit (limiter) and as a clamping circuit; supply, meters and component values are confirmed on the quotation.
Note: Op-amp clipping and clamping circuit apparatus; circuit details confirmed on the quotation.
View Details
Apparatus for an operational amplifier as a voltage comparator: +15 V DC regulated supply, one meter, IC 741 with a zener diode and a combination of resistances connected internally, connections on terminals.
Note: IC 741 voltage comparator apparatus with +15 V regulated supply, zener diode and one meter.
View Details
Apparatus for an operational amplifier as a voltage-to-current and a current-to-voltage converter; supply, meters and component values are confirmed on the quotation.
Note: Op-amp V-to-I and I-to-V converter apparatus; circuit details confirmed on the quotation.
View Details
Apparatus for an operational amplifier as voltage and current feedback amplifier: +15 V DC regulated supply, two dual-range round meters, IC 741 and resistances connected internally, connections at sockets on the front panel.
Note: IC 741 voltage and current feedback amplifier apparatus with +15 V regulated supply and two meters.
View Details
Instrumentation amplifier apparatus with three IC 741 op-amps inside, a +15 V regulated supply plus two protected, continuously variable DC supplies, a potentiometer and resistances on the front panel; for voltage gain and a V vs R curve.
Note: Three-op-amp instrumentation amplifier apparatus with regulated and variable DC supplies.
View Details
Log and antilog amplifier apparatus with IC 741, diode 4007/OA 79 and a potentiometer, powered by a protected, continuously variable +/-15 V DC regulated supply; for the ideality factor and a V1-V0 graph.
Note: IC 741 log and antilog amplifier apparatus with variable +/-15 V regulated supply.
View Details
Apparatus for 4-bit binary to Gray code conversion: DC regulated supply of 5 V at 150 mA, four logic inputs selected with SPDT switches, LED indicators for the Gray code output.
Note: 4-bit binary to Gray code converter with 5 V 150 mA supply, SPDT inputs and LED outputs.
View Details
Apparatus for verifying the truth tables of 4-bit forward and reverse ripple counters using four cascaded JK flip-flops, counting 0 to 15, with LED indicators on each flip-flop output.
Note: 4-bit forward and reverse ripple counter apparatus with four JK flip-flops and LED outputs.
View Details
Digital electronics experiment board for studying a 4-bit BCD (8421) counter and decimal-to-binary encoding with the IC 7490 decade counter, including its reset and set-to-9 inputs.
Note: Experiment board for BCD counting and decimal-to-binary encoding with IC 7490.
View Details
Apparatus for converting a decimal input to its 4-bit BCD (8421) binary output using NAND gates only; listed with a 4-bit BCD counter. Supply, inputs and indicators are confirmed on the quotation.
Note: NAND gate decimal to binary (BCD) encoder apparatus; details confirmed on the quotation.
View Details
Apparatus for studying and verifying the truth table of left shift, right shift and programmable (parallel load) shift register operation using IC 7495, with a mode-select input between serial shift and parallel load.
Note: IC 7495 shift register apparatus for left, right and parallel-load operation.
View Details
Apparatus for studying a decimal to BCD encoder and a BCD to 7-segment decoder: one active decimal input (0-9) is encoded to 4-bit BCD (8421), and the BCD code is decoded to the a-g segment pattern.
Note: Decimal to BCD encoder and BCD to 7-segment decoder apparatus.
View Details
Apparatus for verifying the truth tables of RS and D type flip-flops built from NAND gates: cross-coupled NAND gates for the RS stage and a NAND-based RS stage with a single D input for the D type.
Note: RS and D type flip-flop apparatus using NAND gates.
View Details
Apparatus for verifying the truth tables of JK and JK master-slave flip-flops using IC 7472 and IC 7476; supply, switch and indicator details are confirmed on the quotation.
Note: JK and JK master-slave flip-flop apparatus using IC 7472 and IC 7476.
View Details
Multiplexer apparatus using IC 74153, a dual 4-line to 1-line multiplexer with two select lines shared by both sections and an active-low strobe input on each; supply and indicator details are confirmed on the quotation.
Note: IC 74153 dual 4-to-1 multiplexer apparatus; supply and indicators confirmed on the quotation.
View Details
Apparatus for a 2-to-1 line multiplexer built from AND, OR and NOT gates: the select line S routes data input I0 (S = 0) or I1 (S = 1) to a common output, Y = (NOT S)I0 + S.I1.
Note: Gate-level 2-to-1 multiplexer apparatus using AND, OR and NOT gates.
View Details
Apparatus for the operation of a 16-to-1 line multiplexer using TTL IC 74150: sixteen data inputs D0 to D15, four select lines S0 to S3, one active-low output W and an active-low strobe input.
Note: IC 74150 16-to-1 line multiplexer apparatus.
View Details
Apparatus for a one input, four output demultiplexer using IC 74155: built-in power supply, four SPDT switches for logic 1 and 0, four output indicators, circuit diagram printed on the front panel with connections at sockets.
Note: IC 74155 1-to-4 demultiplexer apparatus with built-in supply, SPDT inputs and four indicators.
View Details
Apparatus for a 4-to-16 line demultiplexer using TTL IC 74154: four binary-weighted address inputs A0 to A3, sixteen mutually exclusive outputs Y0 to Y15, one enable input used as the data input.
Note: IC 74154 4-to-16 line decoder/demultiplexer apparatus.
View Details
Apparatus for studying and verifying the truth table of a RAM circuit using IC 7489 (64-bit, 16 words x 4 bits): built-in 5 V DC supply, ten SPDT logic inputs, four LED output indicators, connections at front-panel sockets.
Note: IC 7489 RAM circuit apparatus with 5 V supply, ten SPDT inputs and four LED outputs.
View Details
The SCR and AC phase control trainer is a power electronics board for studying how SCRs are triggered and used to control AC power, from simple resistance triggering to UJT trigger circuits with ramp and pedestal control.
Note: The SCR and AC phase control trainer is a power electronics board for studying how SCRs are triggered and used to control AC power, from simple resistance triggering to UJT trigger circuits with ramp and pedestal control.
View Details
The SCR converters and reactive loads trainer is a power electronics board for studying SCR triggering in bridge converters that feed inductive and capacitive loads.
Note: The SCR converters and reactive loads trainer is a power electronics board for studying SCR triggering in bridge converters that feed inductive and capacitive loads.
View Details
The SCR regulated DC power supply trainer is a power electronics board for studying how a phase-controlled SCR bridge produces and regulates a DC output.
Note: The SCR regulated DC power supply trainer is a power electronics board for studying how a phase-controlled SCR bridge produces and regulates a DC output.
View Details
The SCR ring counter trainer is a power electronics board with three SCR stages that switch lamp loads on in sequence, with an adjustable delay between steps.
Note: The SCR ring counter trainer is a power electronics board with three SCR stages that switch lamp loads on in sequence, with an adjustable delay between steps.
View Details
The SCR triggering circuit trainer shows how the TCA-785 signal conditioner and pulse generator IC fires an SCR with controlled gate pulses.
Note: The SCR triggering circuit trainer shows how the TCA-785 signal conditioner and pulse generator IC fires an SCR with controlled gate pulses.
View Details
The single phase fully controlled bridge converter trainer lets students build and study a four-SCR bridge supplied from a 230 V AC isolated transformer rated at 50 W.
Note: The single phase fully controlled bridge converter trainer lets students build and study a four-SCR bridge supplied from a 230 V AC isolated transformer rated at 50 W.
View Details
The SCR DC circuit breaker trainer shows an SCR used as a DC circuit breaker that trips when the current exceeds a set limit.
Note: The SCR DC circuit breaker trainer shows an SCR used as a DC circuit breaker that trips when the current exceeds a set limit.
View Details
The SCR lamp flasher trainer studies SCRs in a DC lamp flasher and a TRIAC in an AC flasher.
Note: The SCR lamp flasher trainer studies SCRs in a DC lamp flasher and a TRIAC in an AC flasher.
View Details
The single phase half controlled bridge converter trainer covers both the symmetrical and the asymmetrical configuration, with the waveforms observed on an oscilloscope.
Note: The single phase half controlled bridge converter trainer covers both the symmetrical and the asymmetrical configuration, with the waveforms observed on an oscilloscope.
View Details
The single phase PWM converter trainer is a power electronics board for studying pulse-width modulated conversion.
Note: The single phase PWM converter trainer is a power electronics board for studying pulse-width modulated conversion.
View Details
The single phase series inverter trainer is a power electronics board for studying an SCR series inverter.
Note: The single phase series inverter trainer is a power electronics board for studying an SCR series inverter.
View Details
The stepper motor control trainer uses the SAA-1027 driver IC and an LM 555 timer to run a four-winding DC stepper motor with a 1.8ยฐ step angle.
Note: The stepper motor control trainer uses the SAA-1027 driver IC and an LM 555 timer to run a four-winding DC stepper motor with a 1.8ยฐ step angle.
View Details
The series and parallel resonance trainer lets students plot resonance curves for series and parallel circuits with different values of resistance, capacitance and inductance, and measure Q for both.
Note: The series and parallel resonance trainer lets students plot resonance curves for series and parallel circuits with different values of resistance, capacitance and inductance, and measure Q for both.
View Details
The SCR characteristics trainer is used to study the DC gate (firing) characteristics and anode current characteristics of a silicon controlled rectifier, measure its holding current and plot its phase firing characteristics.
Note: The SCR characteristics trainer is used to study the DC gate (firing) characteristics and anode current characteristics of a silicon controlled rectifier, measure its holding current and plot its phase firing characteristics.
View Details
The semiconductor diode trainer is used to plot the forward and reverse bias characteristics of germanium and silicon diodes and to determine the static and dynamic resistance of a forward-biased P-N junction.
Note: The semiconductor diode trainer is used to plot the forward and reverse bias characteristics of germanium and silicon diodes and to determine the static and dynamic resistance of a forward-biased P-N junction.
View Details
The Schering bridge trainer measures unknown capacitance by the Schering bridge method.
Note: The Schering bridge trainer measures unknown capacitance by the Schering bridge method.
View Details
This single phase variac is an open-type variable autotransformer made for flush mounting at the back of a panel.
Note: This single phase variac is an open-type variable autotransformer made for flush mounting at the back of a panel.
View Details
This single phase variac is an enclosed, portable variable autotransformer that can stand on a table or on the floor, giving an adjustable AC output voltage from a single-phase mains supply.
Note: This single phase variac is an enclosed, portable variable autotransformer that can stand on a table or on the floor, giving an adjustable AC output voltage from a single-phase mains supply.
View Details
Economy squat form beakers in borosilicate glass, product code JA-BAF-1575, available in 11 capacities: 25, 50, 100, 150, 250, 400, 600, 1000, 2000, 3000 and 5000 ml, for school, college and routine laboratory work.
Note: Economy squat form borosilicate beakers in 11 capacities from 25 ml to 5000 ml. State the capacity and quantity for each line.
View Details
Premium squat form beakers in borosilicate glass, product code JA-BAF-1576, listed in 11 capacities from 25 ml to 5000 ml: 25, 50, 100, 150, 250, 400, 600, 1000, 2000, 3000 and 5000 ml.
Note: Premium grade squat form borosilicate beakers in 11 capacities from 25 ml to 5000 ml. Give the capacity and quantity for each line.
View Details
Heavy duty squat form beakers, SGL, graduated with a pouring spout, product code JA-BAF-1577, listed in eight capacities: 25, 50, 100, 150, 250, 400, 600 and 1000 ml, for school, college and teaching laboratories.
Note: Heavy duty graduated squat form beakers with spout, SGL, in eight capacities from 25 ml to 1000 ml.
View Details
Straight-through stopcocks with a PTFE key, product code JA-SCSAS-1656, listed in bore sizes of 2, 4, 6, 8 and 10 mm, used to control the flow of liquids or gases in laboratory glassware set-ups.
Note: Straight-through PTFE key stopcocks in 2, 4, 6, 8 and 10 mm bore sizes.
View Details
Straight-through stopcocks with a glass key, product code JA-SCSAS-1657, listed in bore sizes of 2, 4, 6, 8 and 10 mm, used to control the flow of liquids or gases in laboratory glassware set-ups.
Note: Straight-through glass key stopcocks in 2, 4, 6, 8 and 10 mm bore sizes.
View Details
Squat form screw neck vials in neutral glass with closure, product code JA-STAV-1681, listed in three sizes: 2 dram (7.0 ml, 42 x 20 mm), 4 dram (14.0 ml, 58 x 23.25 mm) and 8 dram (28.25 ml, 72 x 27.5 mm).
Note: Squat neutral glass screw neck vials with closure in 2, 4 and 8 dram sizes (7 to 28.25 ml).
View Details
Glass staining jars, product code JA-SJ-1686, size 115 x 115 mm, for staining, rinsing and processing microscope slides in histology, pathology, cytology and biology laboratories.
Note: Glass staining jar, 115 x 115 mm, for slide staining and processing.
View Details
Anchor stirrers for overhead stirring, product code JA-S-1687, listed in three sizes: 6 mm shaft x 450 mm with 195 mm blade, 6 mm x 600 mm with 140 mm blade, and 11 mm x 750 mm with 140 mm blade.
Note: Anchor stirrers in three sizes, 6 or 11 mm shaft, 450 to 750 mm long, 140 or 195 mm extended blade.
View Details
Collapsible paddle stirrer for overhead stirring, product code JA-S-1688, with a 6 mm shaft 450 mm long and a 70 mm extended blade length, which folds to pass through the neck of a flask.
Note: Collapsible paddle stirrer, 6 mm shaft, 450 mm long, 70 mm extended blade.
View Details
Fixed paddle stirrers for overhead stirring, product code JA-S-1689, listed in two sizes: 6 mm shaft x 600 mm with a 50 mm blade, and 11 mm shaft x 750 mm with an 80 mm blade.
Note: Fixed paddle stirrers: 6 mm x 600 mm with 50 mm blade, and 11 mm x 750 mm with 80 mm blade.
View Details
Link stirrers for overhead stirring, product code JA-S-1690, listed with a 6 mm shaft in 450 mm and 600 mm lengths, both with a 75 mm extended blade length, for mixing in round-bottom and multi-neck flasks.
Note: Link stirrers, 6 mm shaft, 450 or 600 mm long, 75 mm extended blade.
View Details
Stirrer gland with ground sleeve, product code JA-S-1691, with a B19 cone to fit the flask neck and a size 14 screw thread, made to take a 6 mm stirrer shaft for overhead stirring.
Note: Stirrer gland with ground sleeve, B19 cone, size 14 thread, for a 6 mm shaft.
View Details
Stirrer guides for overhead stirrer shafts, product code JA-S-1693, listed in two sizes: 250 mm stem for a 6 mm shaft (B19 socket) and 350 mm stem for an 11 mm shaft (B24 socket, B24 cone).
Note: Stirrer guides: 250 mm stem for 6 mm shafts, and 350 mm stem for 11 mm shafts with B24 joints.
View Details
Saybolt Viscometer (SKU JA-ALI-1706): electrically heated, with cylindrical oil cup, universal and furol tips, immersion-heated bath with Dimmerstat and stirrer, 60 ml receiving flask, filter funnel and spirit level, 220 V 50 Hz single phase.
Note: Measures Saybolt Universal viscosity of petroleum products from 70 ยฐF to 210 ยฐF and Saybolt Furol viscosity of bituminous materials at 250 ยฐF to 450 ยฐF.
View Details
Standard Tar Viscometer (SKU JA-ALI-1707) for cut back bitumen and road oil: chrome-plated copper bath with drain valve, stirrer with curved shield, 10 mm or 4 mm cup with ball valve, immersion heating with Dimmerstat, 220 V 50 Hz.
Note: Electrically heated tar viscometer supplied with a 10 mm or a 4 mm cup and ball valve according to the model ordered.
View Details
Student Clock (JA-MLI-1782): geared plastic student clock with brightly coloured, easy-to-read hands; hidden gears keep the hour hand accurate as the minute hand is turned by the knob on top.
Note: Geared plastic student clock for individual time-telling practice.
View Details
Senior Pythagoras Theorem Magnetic (JA-MLI-1856): acrylic Pythagoras theorem set of 4 right-angle triangles and 1 big square, 16 x 16 in overall, with strong magnets on the back for demonstration on a magnetic board.
Note: Acrylic magnetic Pythagoras theorem set, 16 x 16 in, with 4 right triangles and 1 big square.
View Details
Set n Count With Measuring Counter (JA-MLI-1857): trundle wheel with an adjustable arm, non-slip rubber tyres and a counter that tracks the distance covered in metres, for measuring distance and length.
Note: Trundle wheel with adjustable arm and metre counter for measuring distances.
View Details
Sextant (JA-MLI-1858): school sextant with a small sighting tube mounted on a frame with reflective mirrors and a 60 degree arc, used to measure the angle of an object relative to the horizon.
Note: School sextant with sighting tube, mirrors and 60 degree arc for angle-of-elevation work.
View Details
Sit & Set (JA-MLI-1859): set of 6 flat shapes measuring 12 x 12 cm, supplied in a reusable box, to help students understand basic flat shapes and their geometric combinations.
Note: Set of 6 flat shapes, 12 x 12 cm, in a reusable box.
View Details
Skip Counting Board (JA-MLI-1860): 20 x 30 cm board game with fifty holes and 25 marbles, for counting, skip counting, pattern counting and the four operations.
Note: Skip counting board, 20 x 30 cm, with 50 holes and 25 marbles.
View Details
Sorting Ring (JA-MLI-1861): set of 6 foldable plastic circle rings of 15 in diameter, two in each of three colours, for grouping, set theory and Venn diagram demonstrations from elementary to higher secondary.
Note: Set of 6 foldable plastic sorting rings, 15 in diameter, in three colours.
View Details
Spring Balance (JA-MLI-1862): balance that measures weight by the tension of a spring fixed at one end, with a hook at the other end to attach the object, for school measurement activities.
Note: Spring balance with hook for weighing objects. Capacity and scale are confirmed on the quotation.
View Details
Stacking Counters (JA-MLI-1863): 20 mm round plastic counters in five colours, packed in a clear storage container, for building models of arithmetic, number patterns and ascending and descending order.
Note: Round 20 mm plastic stacking counters in five colours, supplied in a clear storage container.
View Details
Stencils (JA-MLI-1864): set of 10 plane geometrical figures in thick, flexible and washable rubber foam, with magnets that hold each stencil on a metallic board for drawing figures in class.
Note: Set of 10 magnetic rubber-foam stencils of plane geometrical figures for drawing on a metallic board.
View Details
Student Clock Write And Wipe (JA-MLI-1866): set of 5 write-on, wipe-off clocks with movable hands and a space to write the digital time, for small-group time-telling activities.
Note: Set of 5 write-on, wipe-off student clocks with movable hands and a digital time space.
View Details
Student Identity Kit (JA-MLI-1867): maths manipulative kit with 450 objects and counting games for hands-on learning in early primary classes, supplied with a storage case.
Note: Maths manipulative kit of 450 objects and counting games with a storage case.
View Details
Student Time Indicator (JA-MLI-1868): teaching aid for comparing the local times of different countries with GMT, for maths lessons on time and geography lessons on time zones.
Note: Teaching aid for reading and comparing local times of different countries with GMT.
View Details
Set of Volumetric Cups (JA-MLK-1931): plastic set of five measuring cups (1/8, 1/4, 1/3, 1/2 and 1 cup) and six measuring spoons, with metric equivalents, for capacity and fraction activities.
Note: Plastic measuring cups and spoons set with metric equivalents.
View Details
Shapes Board Big (JA-MLK-1933): large shapes board for recognising, naming and matching basic geometric shapes in pre-primary and primary classes; shapes, size and material are confirmed on the quotation.
Note: Large shapes board for early shape recognition.
View Details
Shapes Sorter Moulds (JA-MLK-1934): kit of 12 hollow plastic geometric moulds with 2 packets of clay, for children to make geometrical figures through hands-on activity.
Note: 12 plastic geometric shape moulds with 2 packets of clay, in a kit.
View Details
Student Abacus (JA-MLK-1935): student abacus available in wooden and metal versions and in 7, 13, 15 and 17 rod sizes, for place value, counting and arithmetic practice.
Note: Student abacus, wooden or metal, 7, 13, 15 or 17 rods.
View Details
Serological Water Bath (SKU JA-B-1956): capillary-thermostat water bath, ยฑ0.5 to 1 ยฐC, graduated control knob and pilot lamp, 220 V 50 Hz, in 12, 18 and 32 L sizes for 1, 4 or 8 racks; supplied without racks, thermometer or stirrer.
Note: Serological water bath in three sizes for 1, 4 or 8 racks; racks, thermometer and stirring arrangement are not included.
View Details
Overall Size: (2160 L x 1015 W x 600 H) View Details

Backrest adjustments obtained by smooth crank mechanism with foldable handle View Details

Two section top of uniformly perforated CRCA sheet View Details

These beds are manufactured in accordance with International Mechanical Standards View Details

Mounted on five molded five swiveling castors, strong steel construction View Details

Strong Stainless Steel construction mounted on Moulded Base fitted with Five swivel View Details

Mild Steel tubing frame work of trolley mounted on 15 cm dia swivel View Details

Manufactured from Epoxy powder coated steel tube fixed top section View Details

Slide Warming Table (SKU JA-HP-2065): thermostatically controlled table for warming slides with microtome sections before staining, polished copper or stainless steel top, stove-enamelled mild steel body, 220 V, in 30 x 25, 45 x 30 and 60 x 15 cm sizes.
Note: Thermostatic slide warming table with copper or stainless steel top; temperature range is confirmed on the quotation.
View Details
Shaking Machine (Wrist Action), SKU JA-S-2073: heavy cast iron base with two side arms holding flasks of 100 to 1000 ml, fractional HP motor with continuously variable speed, 80 to 280 oscillations per minute, 4 or 12 flask models, 220 V.
Note: Wrist action flask shaker in 4 and 12 flask models; automatic 0-60 minute timer optional.
View Details
Soxhlet Extraction Unit (SKU JA-SEU-2095): 3 or 6 place extraction heating units on an enamelled MS body with chrome-plated uprights, as mantle (to 300 ยฐC; 600/1200 W), heater, hot plate or SS water bath type; glassware not included.
Note: Multi-place Soxhlet extraction heating unit in mantle, heater, hot plate and bath types; energy regulator optional.
View Details
Spherometer Disc Type (SKU JA-MI-2120): metal frame on three legs at the corners of an equilateral triangle, fine pitch central screw as fourth leg, 10-0-10 mm pitch scale, circular disc scale of 100 (or 50) divisions.
Note: Disc type spherometer with 10-0-10 mm pitch scale and 100-division circular scale.
View Details.jpg)
Spherometer Disc Type (Stainless Steel), SKU JA-MI-2121: stainless steel version of the disc spherometer, metal frame on three legs, fine pitch central screw, 10-0-10 mm pitch scale, circular scale of 100 (or 50) divisions.
Note: Stainless steel disc type spherometer with 10-0-10 mm pitch scale and 100-division circular scale.
View Details
Spherometer Double Disc (SKU JA-MI-2122): circular metal table of 50 mm diameter on three accurately positioned black painted steel legs, steel screw in a long adjustable brass bearing, circular scale on the thread and scale on the table.
Note: Double disc spherometer with 50 mm table, black painted steel legs and steel screw in a brass bearing.
View Details.jpg)
Spherometer Double Disc (Stainless Steel), SKU JA-MI-2123: spherometer with screw and legs of stainless steel, for measuring the radius of curvature of lenses and spherical surfaces. Pitch and least count confirmed on the quotation.
Note: Double disc spherometer with stainless steel screw and legs, for radius of curvature measurements.
View Details
Spherometer Demonstration Model (SKU JA-MI-2124): extra large spherometer for classroom demonstration, circular aluminium disc of about 6 cm diameter divided into equal parts, black painted aluminium vertical scale.
Note: Extra large demonstration spherometer with 6 cm aluminium disc and black painted vertical scale.
View Details
Stop Clock (SKU JA-MI-2125): Smith type mechanical stop clock in a metal case with fly-back action, start and stop lever on the right, reset press on the left, subsidiary dial for 0 to 60 minutes. Supplied by JaincoLab.
Note: Mechanical stop clock in metal case with fly-back reset and 0-60 minute subsidiary dial.
View Details
Spring Balance Tubular (SKU JA-MI-2134): colour-coded dual scale spring balance in newton and gram, 1 N/100 g to 30 N/3 kg, zero adjustment, anodised metal scale, stainless steel suspension loop and load hook.
Note: Colour-coded dual scale spring balance, newton and gram, in ranges from 1 N/100 g to 30 N/3 kg.
View Details
Spare Analytical Gram Weights Brass C.P. (SKU JA-MI-2140): individual chrome plated brass analytical weights of 1 g, 2 g, 5 g, 10 g, 20 g, 50 g and 100 g, to replace lost or damaged weights in analytical weight boxes.
Note: Individual chrome plated brass analytical weights from 1 g to 100 g.
View Details.jpg)
Spare Physical Gram Weights (Brass C.P), SKU JA-MI-2144: individual chrome plated brass weights of 1 g, 2 g, 5 g, 10 g, 20 g, 50 g and 100 g, to replace missing pieces in physical weight boxes.
Note: Individual chrome plated brass physical weights from 1 g to 100 g.
View Details.jpg)
Slotted Weight Iron Rust C.P. Proof (Set of Five), SKU JA-MI-2145: iron slotted weights, chrome plated against rust (500 g black powder coated), in sets of five: 10 g, 20 g, 50 g, 100 g or 500 g.
Note: Iron slotted weights in sets of five, chrome plated (500 g black powder coated), 10 g to 500 g.
View Details.jpg)
Slotted Weight (Iron Black Painted), SKU JA-MI-2146: black painted cast iron slotted weights, suited to sonometers and other set-ups that need large loads. Sizes and set make-up confirmed on the quotation.
Note: Black painted cast iron slotted weights for sonometers and heavy loads; sizes confirmed on the quotation.
View Details
Slotted Weight Brass C.P (SKU JA-MI-2147): slotted weights turned from brass rod and adjusted, chrome plated or brass polished, in sets of 5 x 5 g, 10 g, 20 g, 50 g or 100 g, and 10 x 50 g or 100 g.
Note: Turned brass slotted weights, chrome plated or polished, in sets from 5 g x 5 to 100 g x 10.
View Details
Small animal cage (SKU JA-PLE-2245) in powder-coated steel or stainless steel with a feeding bottle, feeding bowl and removable waste-collecting tray, listed in three sizes, for pharmacology labs and college animal houses.
Note: Powder-coated steel or stainless steel cage with feeding bottle, feeding bowl and removable waste tray, in three listed sizes.
View Details
Serological Water Bath (SKU JA-WB-2280): stainless steel pyramidal cover, thermostat 5 ยฐC above ambient to 90 ยฐC ยฑ1 ยฐC, 220 V AC; four sizes 300 x 250 x 175 to 605 x 300 x 175 mm, 1.0 to 3.0 kW, 2 to 8 racks; stirrer optional.
Note: Serological water bath with stainless steel pyramidal cover, 5 ยฐC above ambient to 90 ยฐC, in four sizes for 2 to 8 racks.
View Details
Sox let And Digestion Units (SKU JA-SADU-2296): mild steel Soxhlet extraction and digestion units without glass parts, heating mantles or hot plates up to 300ยฐC, flask rods, individual pilot lamps and energy regulators; 3 or 6 tests.
Note: Soxhlet extraction and digestion heating units, 3 or 6 tests, mantle or hot plate type, up to 300ยฐC, without glass parts.
View Details
Double walled construction with gasket double wall door. View Details

That used syringe and needle are very dangerous to human which can cause incurable disease View Details

Sliding Microtome (SKU JA-M-2332): Jung type sliding microtome for paraffin, celloidin, embedded or natural specimens, sections up to 40 microns in 2 micron steps, 27 cm sliding track, 25 mm feed, 31 x 26 mm object stage, 120 mm razor.
Note: Jung type sliding microtome, sections up to 40 microns in 2 micron steps on a 27 cm track.
View Details
Slide Warming Table (SKU JA-M-2339): stainless steel top plate on a metal stand with thermostat control up to 70ยฐC, pilot lamp, temperature control knob and cord and plug, 220 V AC 50 Hz, for slow even heating of slides.
Note: Slide warming table with stainless steel top plate and thermostat control up to 70ยฐC.
View Details
Specimen Jar (SKU JA-M-2344): rectangular museum specimen jar with cover, made of clear acrylic sheet chemically welded to prevent leakage, fabricated in any size.
Note: Rectangular clear acrylic specimen jar with cover, chemically welded, made to any size.
View Details
Slide Mounter (SKU JA-M-2345): bench aid for mounting specimens and coverslips on microscope slides in histology and biology laboratories. Design and dimensions confirmed on the quotation. Supplied by JaincoLab.
Note: Slide mounter for microscope slide preparation; design and dimensions confirmed on the quotation.
View Details
Student electric kymograph (SKU JA-SEK-2347) with a constant speed motor, gear box and plate clutch in the base, a 6 inch diameter cylinder on a stainless steel spindle, double electric contact arms and eight surface speeds.
Note: Electric recording drum with motor, gear box and plate clutch in the base, a 6 inch cylinder and eight surface speeds.
View Details
Student Kymographs Digital (SKU JA-SKD-2348): microprocessor-controlled recording drum with stepper motor, digital speed selection, backlit 16 x 2 LCD, 12 V 1 A supply, chrome-plated and powder-coated body and self-lubricating gear. Supplied by JaincoLab.
Note: Microprocessor-controlled digital kymograph with stepper motor, backlit 16 x 2 LCD and 12 V 1 A supply.
View Details
Student nerve-muscle assembly (SKU JA-SNA-2350) for neuromuscular experiments, offered as Set I with a Du Bois-Reymond induction coil or Set II with a solid state stimulator, each with myograph, heart lever, nerve muscle chamber, stand and blocks.
Note: Neuromuscular experiment set in two versions, induction coil (Set I) or solid state stimulator (Set II), with levers, chamber, stand and fixing blocks.
View Details
Smoking and varnishing outfits (SKU JA-SVO-2353) for preparing kymograph paper: a smoking stand with turning handle for all sizes of cylinders, a gas smoking burner and a kerosene smoking burner with winding-up gear.
Note: Smoking stand with turning handle for all cylinder sizes, and gas or kerosene smoking burners, for preparing smoked kymograph paper.
View DetailsSimple electrode (SKU JA-SE-2359) made from clear acrylic sheet carrying two copper wires, used to lead electrical stimuli to nerve and muscle preparations in physiology and experimental pharmacology practicals.
Note: Clear acrylic sheet body carrying two copper wires. Wire spacing, lead length and terminals are confirmed on the quotation.
View DetailsSimple lever (SKU JA-SL-2363) of stout construction with a chromium-plated frame, a stop at one end and an interchangeable stem; the lever passes through an axle pivoted between centres and a thumb screw sets its length.
Note: Chromium-plated frame with an end stop and an interchangeable stem, and a thumb screw on the axle for adjusting the lever length. The stem size is confirmed on the quotation.
View Details
Student isometric lever (SKU JA-SIL-2367): a holder carrying a length of spring steel wire and a flat steel lever with holes for attaching thread, adjustable, and also available for frontal writing points.
Note: Holder with a length of spring steel wire and a flat steel lever with holes for thread. Also available for frontal writing points.
View Details
Starling crank myograph (SKU JA-SCM-2369) with a cork top, complete with double clamp and frog board, raised sides, fixing cork and a paraffin bed with myograph lever, for recording frog muscle contractions on a kymograph.
Note: Cork top, double clamp, frog board, raised sides, fixing cork and a paraffin bed with myograph lever, as listed.
View Details
Standard X-block (SKU JA-SXB-2373) machined from solid brass rod and richly chromium plated, holding 9 mm and 6 mm rods; the Standard Large X-block holds 12.5 mm and 9 mm rods. For stands and recording set-ups.
Note: The standard size holds 9 mm and 6 mm rods; the large size holds 12.5 mm and 9 mm rods. Both are chromium-plated solid brass.
View DetailsSmall Animal Operating Table (SKU JA-SAOT-2386): for rabbits, rats and guinea pigs; stainless steel top with adjustable head holder, tie-cleats and cut-back head end with warming chambers. For pharmacology and physiology labs.
Note: Stainless steel operating table with head holder, tie-cleats and warming chambers for rabbits, rats and guinea pigs.
View Details
Spirometer (SKU JA-S-2392): 6 litre float spirometer with chain/cord counterbalance over pulley, calibrated volume tube, inlet and outlet tubes, corrugated tube and mouthpiece, for lung volume practicals in physiology labs.
Note: 6 litre counterbalanced spirometer with calibrated volume tube and mouthpiece for physiology teaching.
View Details
Simple Key (SKU JA-SK-2401): simple key on vulcanite base for opening and closing stimulating circuits in physiology and pharmacology practicals. Supplied by JaincoLab.
Note: Simple key on vulcanite base for closing and opening stimulating circuits in physiology practicals.
View Details
Student Induction Coil (SKU JA-SIC-2403): teakwood base with graduated scale, primary 300 turns, secondary 6500 turns, interrupter working directly off the iron core, heavy duty contacts. For physiology practicals.
Note: Student induction coil with 300/6500-turn windings and core-operated interrupter for nerve-muscle practicals.
View Details
Skin Fold Caliper (SKU JA-SFC-2408): dial skinfold caliper, measuring range 0-80 mm, dial graduation 0.20 mm, constant measuring pressure 10 g/mmยฒ over the range, repeatability 0.20 mm, for body-fat anthropometry. Supplied by JaincoLab.
Note: Dial skinfold caliper, 0-80 mm, 0.20 mm graduation, constant 10 g/mmยฒ jaw pressure, for anthropometry practicals.
View Details
Sanitary Napkin Incinerator (SKU JA-I-2424): automatic electric unit for hygienic disposal of used sanitary napkins; about 200 napkins a day, up to 20 at a time, front door with auto closer, ash tray, temperature and timer display.
Note: Automatic, electrically operated sanitary napkin incinerator with a loading capacity of about 200 napkins a day.
View Details
Small Animal Incinerator (SKU JA-I-2431): gas-fired carcass incinerator with afterburner and digital temperature controller; incineration rate 22 kg/hour, 90 kg weight capability, 0.288 m3 chamber. Supplied by JaincoLab.
Note: Gas-fired small animal carcass incinerator, 22 kg per hour, supplied by JaincoLab.
View Details
Small Poultry Waste Incinerator (SKU JA-I-2437): refractory-lined incinerator with concave hearth, secondary combustion chamber, counter-balanced fill door and timed automatic shut-off; LP gas, natural gas or fuel oil. Supplied by JaincoLab.
Note: Refractory-lined poultry waste incinerator with secondary chamber, supplied by JaincoLab.
View Details
These are Microprocessor Controlled Chambers with soft touch keyboard for fast and accurate setting View Details

Suitable for conducting various experiments on seed germination. View Details

Each chamber size: 555 (W) x 910 (H) x 605 (D) mm. View Details

Soaps and Detergents Chart (SKU JA-CC-2866): 58 x 90 cm wall chart on soaps and detergents, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on soaps and detergents with plastic rollers, for Class 10 and Class 12 chemistry.
View Details
Synthetic Fibers Chart (SKU JA-CC-2868): 58 x 90 cm wall chart on synthetic fibres, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on synthetic fibres with plastic rollers, for middle-school science and Class 12 chemistry.
View Details
Sodium Chloride Crystal Chart (SKU JA-CC-2882): 58 x 90 cm laminated and full-colour wall chart on the crystal structure of sodium chloride with plastic rollers.
Note: Laminated and full-colour 58 x 90 cm wall chart on the crystal structure of sodium chloride with plastic rollers, for Class 12 chemistry and B.Sc physical chemistry.
View Details
Sound Chart (SKU JA-PC-2890): 58 x 90 cm wall chart on sound and its properties, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on sound and its properties with plastic rollers, for middle-school science and Class 9 physics.
View Details
Simple Machine Chart (SKU JA-PC-2892): 58 x 90 cm wall chart on simple machines, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on simple machines with plastic rollers, for middle-school science and Class 9 physics.
View Details
Static Electricity Chart (SKU JA-PC-2905): 58 x 90 cm wall chart on static electricity, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on static electricity with plastic rollers, for middle-school science and Class 12 physics.
View Details
Steam Engine Chart (SKU JA-PC-2934): 58 x 90 cm wall chart on the steam engine, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on the steam engine with plastic rollers, for middle-school science and Class 11 physics.
View DetailsScience Educational Charts (SKU JA-PC-2938): 58 x 90 cm wall charts in biology, chemistry, physics and general science series, printed on 130 gsm coated paper and laminated with 30 micron polyester film.
Note: Laminated 58 x 90 cm wall charts in several science subject series, for school and college science teaching.
View Details
Soil as a Natural Resource Chart (SKU JA-GSC-2960): 58 x 90 cm laminated and full-colour wall chart on soil as a natural resource with plastic rollers.
Note: Laminated and full-colour 58 x 90 cm wall chart on soil as a natural resource with plastic rollers, for middle school science and geography classes.
View Details
Solar Cooker Chart (SKU JA-GSC-2962): 58 x 90 cm wall chart on solar cooker, printed in full colour on 130 gsm coated paper, laminated on both sides with 30 micron heat-sealable polyester film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on solar cooker with plastic rollers, for middle and secondary school science classes.
View Details
Sericulture (L. H. Silkworm) Chart (SKU JA-GSC-2966): 58 x 90 cm laminated and full-colour wall chart on sericulture and the silkworm with plastic rollers.
Note: Laminated and full-colour 58 x 90 cm wall chart on sericulture and the silkworm with plastic rollers, for middle school science and secondary biology classes.
View Details
Srinivasa Ramanujan Life Sketch Chart (SKU JA-LSOS-3028): 70 x 100 cm wall chart on Srinivasa Ramanujan, printed on synthetic paper in original colours.
Note: 70 x 100 cm wall chart on Srinivasa Ramanujan, for school science classrooms and laboratories.
View Details
Satyendra Nath Bose Life Sketch Chart (SKU JA-LSOS-3030): 70 x 100 cm wall chart on Satyendra Nath Bose, printed on synthetic paper in original colours.
Note: 70 x 100 cm wall chart on Satyendra Nath Bose, for school science classrooms and laboratories.
View Details
Skeleton and Circulatory System Chart (SKU JA-FAC-3070): 50 x 75 cm wall chart on skeleton and circulatory system, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on skeleton and circulatory system with plastic rollers, for first aid training and school health education classes.
View Details
Snakes and their Bites Chart (SKU JA-FAC-3084): 50 x 75 cm wall chart on snakes and snake bites, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on snakes and snake bites with plastic rollers, for first aid training and school health education classes.
View Details
Shuddhi Kriyas Chart (SKU JA-YC-3087): 50 x 75 cm wall chart on shuddhi kriyas, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on shuddhi kriyas with plastic rollers, for school physical education and yoga classes.
View Details
Shankh Prakshalan Chart (SKU JA-YC-3088): 50 x 75 cm wall chart on shankh prakshalan, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on shankh prakshalan with plastic rollers, for school physical education and yoga classes.
View Details
Surya Namaskar Chart (SKU JA-YC-3089): 50 x 75 cm wall chart on surya namaskar, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on surya namaskar with plastic rollers, for school physical education and yoga classes.
View Details
Sarvangasan and Halasan Chart (SKU JA-YC-3095): 50 x 75 cm wall chart on Sarvangasan and Halasan, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on Sarvangasan and Halasan with plastic rollers, for school physical education and yoga classes.
View Details
Spine and Related Organs Chart (SKU JA-YC-3097): 50 x 75 cm wall chart on spine and related organs, laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on spine and related organs with plastic rollers, for school physical education and yoga classes.
View Details
Subtraction Chart (SKU JA-MPC-3101): 50 x 75 cm wall chart on subtraction, available in an English or a Hindi version.
Note: 50 x 75 cm wall chart on subtraction, for primary school mathematics classes.
View Details
Solar System Chart (SKU JA-COG-3107): 70 x 100 cm wall chart on solar system, listed in an English-only version (Syn.) and an English and Hindi combined version (Lam.).
Note: 70 x 100 cm wall chart on solar system, for middle and secondary school geography classes.
View Details
Structure of Earth Chart (SKU JA-COG-3109): 70 x 100 cm wall chart on structure of the earth, listed in an English-only version (Syn.) and an English and Hindi combined version (Lam.).
Note: 70 x 100 cm wall chart on structure of the earth, for middle and secondary school geography classes.
View Details
Surveying Chart (SKU JA-COG-3115): 70 x 100 cm wall chart on surveying, listed in an English-only version (Syn.) and an English and Hindi combined version (Lam.).
Note: 70 x 100 cm wall chart on surveying, for middle and secondary school geography classes.
View Details
Storm and Ocean Current Chart (SKU JA-COG-3118): 70 x 100 cm wall chart on storms and ocean currents, listed in an English-only version (Syn.) and an English and Hindi combined version (Lam.).
Note: 70 x 100 cm wall chart on storms and ocean currents, for middle and secondary school geography classes.
View DetailsSolar and Lunar Eclipse Chart (SKU JA-COG-3120): 50 x 75 cm wall chart on eclipses, laminated, with English and Hindi text combined.
Note: Laminated 50 x 75 cm wall chart on eclipses, for middle and secondary school geography classes.
View Details
Season Chart (SKU JA-COG-3121): 50 x 75 cm wall chart on seasons, laminated, with English and Hindi text combined.
Note: Laminated 50 x 75 cm wall chart on seasons, for middle and secondary school geography classes.
View Details
Sun and Planets Chart (SKU JA-COG-3124): 50 x 75 cm wall chart on the sun and planets, laminated, with English and Hindi text combined.
Note: Laminated 50 x 75 cm wall chart on the sun and planets, for middle and secondary school geography classes.
View Details
Sunlight and Rainbow Chart (SKU JA-COG-3139): 50 x 75 cm wall chart on sunlight and the rainbow, laminated, with English and Hindi text combined.
Note: Laminated 50 x 75 cm wall chart on sunlight and the rainbow, for middle and secondary school geography classes.
View Details
Streams (Rivers) Charts (SKU JA-CFOTE-3142): 50 x 75 cm wall chart on streams and rivers, printed in multicolour on 80 gsm map litho paper, laminated on both sides with hot-seal polyester film and fitted with plastic rollers at top and bottom.
Note: Laminated and full-colour 50 x 75 cm wall chart on streams and rivers with plastic rollers, for secondary school geography classes.
View Details
Sea Water Map Chart (SKU JA-CFOTE-3144): 50 x 75 cm wall chart on sea water action, printed in multicolour on 80 gsm map litho paper, laminated on both sides with hot-seal polyester film and fitted with plastic rollers at top and bottom.
Note: Laminated and full-colour 50 x 75 cm wall chart on sea water action with plastic rollers, for secondary school geography classes.
View Details
Soil Conservation Chart (SKU JA-MAE-3155): 50 x 75 cm wall chart on soil conservation, printed in multicolour on 80 gsm map litho paper, laminated on both sides with hot-seal polyester film and fitted with plastic rollers.
Note: Laminated and full-colour 50 x 75 cm wall chart on soil conservation with plastic rollers, for school environmental studies and geography classes.
View Details
September Weather Map of India (SKU JA-WMOI-3169): 70 x 100 cm wall chart on India's weather in September, printed in multicolour on white synthetic polyart and fitted with plastic rollers.
Note: 70 x 100 cm wall chart on India's weather in September with plastic rollers, for school geography classes.
View Details
Symbols of unity Chart (SKU JA-SC-3186): 50 x 75 cm wall chart on symbols of unity, printed as a wall chart.
Note: 50 x 75 cm wall chart on symbols of unity, for pre-primary and primary classes.
View Details
Social Reformers Chart (SKU JA-SFIF-3222): 50 x 75 cm wall chart on social reformers, printed in colour, explaining the topic in pictures and words.
Note: 50 x 75 cm wall chart on social reformers, for school history and social studies classes.
View Details
Symbols of National Unity Chart (SKU JA-NIC-3238): 50 x 75 cm wall chart on national integration ("Symbols of National Unity"), laminated on both sides with thick plastic film and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on national integration ("Symbols of National Unity") with plastic rollers, for primary and middle school classes.
View Details
Subhas Chandra Bose Life Sketch Chart (SKU JA-LSOGM-3248): 70 x 100 cm wall chart on the life of Subhas Chandra Bose, printed on synthetic paper in original colours.
Note: 70 x 100 cm wall chart on the life of Subhas Chandra Bose, for school history and social studies classes.
View Details
Shivaji Life Sketch Chart (SKU JA-LSOGM-3252): 70 x 100 cm wall chart on the life of Chhatrapati Shivaji, printed on synthetic paper in original colours.
Note: 70 x 100 cm wall chart on the life of Chhatrapati Shivaji, for school history and social studies classes.
View Details
Swami Vivekanand Life Sketch Chart (SKU JA-LSOGM-3253): 50 x 75 cm wall chart on the life of Swami Vivekananda, laminated and fitted with plastic rollers.
Note: Laminated 50 x 75 cm wall chart on the life of Swami Vivekananda with plastic rollers, for school history and social studies classes.
View Details
Sentence Chart (SKU JA-EGC-3271): 50 x 75 cm wall chart on sentences (English grammar), laminated.
Note: Laminated 50 x 75 cm wall chart on sentences (English grammar), for primary and middle school English classes.
View Details
South America Chart (SKU JA-MC-3302): 70 x 100 cm wall chart on the map of South America, laminated.
Note: Laminated 70 x 100 cm wall chart on the map of South America, for school geography classes.
View Details
Sri Lanka Chart (SKU JA-MC-3303): 70 x 100 cm wall chart on the map of Sri Lanka, laminated.
Note: Laminated 70 x 100 cm wall chart on the map of Sri Lanka, for school geography classes.
View Details
Sikkim Chart (SKU JA-SMP-3322): 70 x 100 cm wall chart on the map of Sikkim, laminated.
Note: Laminated 70 x 100 cm wall chart on the map of Sikkim, for school geography and social studies classes.
View Details
Single Channel Micro pipette (SKU JA-BTD-3337): fixed-volume, fully autoclavable single channel micropipette with colour coding, large grip, built-in tip ejector for single-handed use and storage holder. Volumes confirmed on the quotation.
Note: Fixed-volume, autoclavable single channel micropipette, supplied by JaincoLab.
View Details
Stands for Micro pipettes (SKU JA-BTD-3338): Borosil micropipette stands in several designs for single channel and multichannel pipettes. Supplied by JaincoLab; design and capacity confirmed on the quotation.
Note: Borosil stands for single channel and multichannel micropipettes, supplied by JaincoLab.
View Details
Sokkia total station (SKU JA-CADE-3350): Windows embedded OS (6.0), MAGNET Field on-board software, RED-tech reflectorless EDM, long link data communication, waterproof rugged compact body; model confirmed on quotation.
Note: Sokkia-brand total station with reflectorless EDM, supplied by JaincoLab.
View Details
South total station (SKU JA-CADE-3351): South-brand electronic surveying instrument, compact, lightweight, portable and easy to operate; model, accuracy and accessories confirmed on the quotation.
Note: South-brand total station for surveying practicals and field work, supplied by JaincoLab.
View Details
Sundial compass (SKU JA-NC-3381): brass instrument combining a compass and a sundial, with fine finish and decorative pattern, for display, gifting and simple sun-time demonstrations; size on quotation.
Note: Brass sundial compass for display and gifting, supplied by JaincoLab.
View Details
Sliding compass 3 inch (SKU JA-NC-3383): carved brass compass with gleaming surface and perfect finish, for ethnic and antique-style interiors and nautical or astronomy-themed collections.
Note: 3 inch carved brass sliding compass for dรฉcor and collections, supplied by JaincoLab.
View Details
Steampunk wrist sundial (SKU JA-NC-3396): handmade solid brass sundial worn on the wrist, dial approx. 2 inches, full length approx. 10 inches, for gifts, costume and personal use.
Note: Handmade solid brass steampunk wrist sundial, supplied by JaincoLab.
View Details
Sokkia auto level (SKU JA-SE-3407): Sokkia-brand automatic level for quick height and distance measurement, including in tunnels, heat shimmer and vibration; light weight; model confirmed on the quotation.
Note: Sokkia-brand automatic level, supplied by JaincoLab.
View Details
Sand pouring cylinder (SKU JA-STE-3409): small set (115 mm cylinder, 100 x 150 mm container, 300 mm tray) or large set (215 mm cylinder, 200 x 250 mm container, 450 mm tray) for field density by sand replacement.
Note: Sand pouring cylinder sets for field density testing, made by JaincoLab.
View Details
Stacking Counter set (SKU JA-C-3478): 20 mm round plastic stacking counters in 5 colours, packed in a clear storage container, for arithmetic, patterns and ascending and descending order in primary maths.
Note: 20 mm round plastic stacking counters, 5 colours, clear storage container. Quantity confirmed on the quotation.
View Details
Skip Counting board game (SKU JA-C-3481): 20 x 30 cm board with fifty holes and 25 marbles for counting, skip counting, multiplication and number patterns in primary maths.
Note: 20 x 30 cm board with 50 holes, supplied with 25 marbles.
View Details
Sorting Rings (SKU JA-S-3489): set of 6 foldable plastic rings, 15 in diameter, in three colours (two of each), for grouping, set theory and Venn diagram demonstrations from elementary to higher secondary.
Note: Set of 6 foldable plastic rings, 15 in diameter, two in each of three colours.
View Details
Stencils (SKU JA-G-3509): set of 10 plane geometric figures in thick, flexible, washable rubber foam with magnets, for drawing accurate shapes on a metallic board in geometry lessons.
Note: Set of 10 magnetic rubber-foam geometry stencils for board use. Figure list confirmed on the quotation.
View Details
Sand blaster measures 10x13x14 inches with rubber glove for abrasion free working View Details

Offered comes in quality stainless steel construction finish and finds use in areas like hospitals View Details

Student Clock Write and Wipe (SKU JA-T-3661): set of 5 write-on, wipe-off clocks with movable hands and a space to write the digital time, for small-group time-telling activities in primary maths.
Note: Set of 5 write-on, wipe-off student clocks with movable hands.
View Details
Offered comes in quality construction finish and finds extensive use in hospitals and health care View Details

Student Time Indicator (SKU JA-T-3670): teaching aid for comparing the local time of different countries with GMT and working out time differences. Size, material and places shown confirmed on the quotation.
Note: Time indicator for comparing local times with GMT; details confirmed on the quotation.
View Details
Calibrated nylon cuff, stop pin manometer, 2-tube adult size bladder. View Details

Sphygmomanometer Aneroid Round Shaped - Mobile, ABS Round dial face adjustable for easy reading View Details

Sphygmomanometer Aneroid Square Shaped 14cm diameter dial face adjustable for easy reading. View Details

Economy type blood pressure monitor, standard cotton cuff, stop pin manometer. View Details

Senior Pythagoras Theorem (SKU JA-T-3684): acrylic set of 4 right-angle triangles and 1 big square, 16 in x 16 in overall, with magnets on the back for demonstrating Pythagoras theorem on a magnetic board.
Note: Acrylic magnetic Pythagoras set, 4 triangles and 1 square, 16 x 16 in.
View Details
Wheel: Outer wheel of 100cm diameter should be made of 30mm dia 16 gauge wall thickness tube View Details

Student Identities Kit (SKU JA-I-3721): 15 x 15 cm algebra manipulative for individual pupils to model polynomials and algebraic identities. Pieces and material confirmed on the quotation.
Note: 15 x 15 cm student kit for algebraic identities; pieces confirmed on the quotation.
View Details
Ruggedly built tabular steel frame stands on four rubber tipped property balanced legs provided. View Details

Sextant (SKU JA-T-3732): school sextant model with a hollow sighting pipe, reflecting mirrors and a 60 degree arc for measuring the angle of an object above the horizon in trigonometry.
Note: Sextant model with sighting pipe, mirrors and 60 degree arc.
View Details
Constructed from lightweight and thick foam laminated fabric mesh. View Details

Constructed from lightweight and durable foam laminated fabric mesh for extra protection and comfort. View Details

Lid Snaps for on the body. Belt fits snugly and uniformly on the body View Details

A line fine catheter especially designed for passage through a peripheral blood vessel into the chambers View Details

Suction Tubing Green, Size: 6.0mm (3.0mm). Suction Tubing Green, Size: 7.0mm (3.0mm). View Details

Senior Math Kit (SKU JA-CK-3792): classroom maths kit for senior classes with a magnetic fraction disk, ring of theorems, transparent hollow sphere and cylinder, conic section and angle property models. Full list on quotation.
Note: Senior classroom maths kit; full contents confirmed on the quotation.
View Details
The balanced front flywheel provides a smooth, fluid motion. View Details

Power Output: 500 Watt of R.F. Operating Frequency: 7.12 Mhz(approx.). View Details

Monopolar cutting, coagulation, blended output Bipolar cutting / Bipolar coagulation View Details

Self-explanatory with abbreviated operating instructions on LCD. View Details

Semi-Fowler Bed with mechanically operated Back rest by Super-Smooth crank mechanism. View Details

Intends for babies swaddle. Upper part covered by foam-rubber and padded View Details

Top made of molded washable plastic. Freight saving knock-down construction. View Details

Two slot easy operation for destroying needle & syringe View Details

Syringe & Needle Destroyer Two slot easy operation for destroying Needle & Syringe View Details

The Stereo Acuity Test Kit is a booklet-based set of stereopsis (depth perception) tests used in vision screening and in optometry and orthoptics teaching.
Note: The Stereo Acuity Test Kit is a booklet-based set of stereopsis (depth perception) tests used in vision screening and in optometry and orthoptics teaching.
View Details
Dual-channel with different flow rate Channel sleeping function View Details

Ultrasonic Cleaner Tank Dim.: 20cm x 15cm x 7cm liter Cap.: 1.8 Ltrs U/S View Details

Saybolt Viscometer Apparatus (SKU JA-GLE-4019): efflux-time viscometer for petroleum oils, results in Saybolt seconds, with hand stirring by turntable arrangement and operation on 220 V AC mains.
Note: Saybolt viscometer for petroleum oils with hand stirring by turntable arrangement, 220 V AC.
View Details
Durability Reliability Dimensionally accurate View Details

Brass wire stirrup (SKU JA-PLE-4131), 50 mm long and 45 mm high with hooks 50 mm apart, for suspending a bar magnet or friction rod so it turns in a horizontal plane in magnetism and electrostatics experiments. Supplied without magnet or cord.
Note: Supplied without magnet or cord.
View Details
Steel rod (SKU JA-PLE-4133), 150 mm long and 10 mm in diameter, used as a standard steel specimen in school and college physics experiments such as magnetisation and comparison with soft iron.
Note: Size 150 mm length x 10 mm diameter.
View Details
Semi-circular refraction block (SKU JA-PLE-4155) in clear acrylic with all faces fully polished, 90 mm diameter, 16 mm or 25 mm thick, for critical angle, total internal reflection and refraction practicals.
Note: Listed in 16 mm and 25 mm thicknesses at 90 mm diameter.
View Details
PVC sprinkler (SKU JA-PLE-4165) for iron and steel filings, used to spread filings evenly over paper or glass above magnets and current-carrying conductors in magnetic field experiments.
Note: Made of PVC; for iron and steel filings.
View Details
Soft iron plate (SKU JA-PLE-4166), 75 mm long and 25 mm wide, for demonstrating magnetic induction and comparing temporary magnetism in soft iron with steel in school and college magnetism practicals.
Note: Size 75 x 25 mm (length x breadth).
View Details
Solenoid inductor (SKU JA-PLE-4182): 1000-turn primary about 100 cm long and a secondary in three marked sections of 100, 250 and 500 turns with separate terminals, iron core, iron stand and polished teak base.
Note: Secondary sections of 100, 250 and 500 turns each have separate terminals. A wooden-base version with 20 turns per cm, 2 x 50 cm long, is also listed.
View Details
Scott-Russell straight line mechanism model (SKU JA-PLE-4190) on an A3 white melamine board: two amber Perspex links with one fixed pivot and one slider, CD = BD = AD, so point A traces a straight line.
Note: Generates an exact straight line with two links, one fixed pivot and one slider. One of sixteen board-mounted mechanisms.
View Details
Slotted link (Scotch yoke) mechanism model (SKU JA-PLE-4194) on an A3 white melamine board: wheel pin drives a slider in a cross-frame slot so the link moves in exact simple harmonic motion; amplitude set by pin radius.
Note: Standard mechanism for generating simple harmonic motion. One of sixteen board-mounted mechanisms.
View Details
Stand, board, clips and collet pencil (SKU JA-PLE-4196), listed with the series of sixteen A3 board-mounted mechanism models whose hollow-rivet joints accept a pencil for tracing loci onto clipped paper.
Note: Listed with the A3 mechanism board series. Sizes and materials are confirmed on the quotation.
View Details
Simple pantograph mechanism model (SKU JA-PLE-4198) on an A3 white melamine board: long links AB and BC pivoted at C with a rhombus BEDF, copying a drawing at a magnified or reduced scale.
Note: Standard mechanism for drawing a locus at a different scale. One of sixteen board-mounted mechanisms.
View Details
Simple cell (SKU JA-PLE-4249): a jar with a zinc plate and a copper plate for simple voltaic cell experiments in schools; electrolyte, leads and meters are not included.
Note: Jar with zinc and copper plates only. Electrolyte is not included.
View Details
Spare terminals (SKU JA-PLE-4255): brass for zinc rods and plates, complete and heavy brass for meter bridges and potentiometers, red and black Bakelite-head for meter cases, and insulated red and black 5/32 lock type.
Note: Six terminal types listed, including standard and heavy insulated red and black terminals.
View Details
Solar energy, photovoltaic and wind power system (SKU JA-PLE-4274) for teaching renewable electricity generation in schools, colleges and training institutes; components confirmed on the quotation.
Note: Components are confirmed on the quotation to suit the course level.
View DetailsSpectrometer and automation system (SKU JA-PLE-4277) for studying nuclear physics in university and college laboratories, with automated data collection; configuration confirmed on the quotation.
Note: Detectors, software and accessories are confirmed on the quotation.
View Details
Slip ring induction motor (SKU JA-PLE-4291) for machines labs: 3-phase 415 V 50 Hz, 2 to 7.5 HP, rotor resistance starter with overload and no-volt protection, brake drum and spring-balance frame for load tests.
Note: Gun-metal slip rings with carbon brushes; vacuum-impregnated copper windings; dynamically balanced skewed rotor.
View Details
Synchronous motor with exciter (SKU JA-PLE-4292): self-synchronising, 415 V, 1500 rpm, 2 to 5 HP, directly coupled exciter; pulley loading or DC generator on a common channel base for electrical loading.
Note: Gun-metal slip rings with carbon brushes; vacuum-impregnated windings; dynamically balanced skewed rotor.
View Details
Squirrel cage induction motor (SKU JA-PLE-4293) for machines labs: 1-phase 220 V or 3-phase 415 V, 50 Hz, 0.5 to 15 HP, cast-iron frame, aluminium rotor, balanced brake drum and spring-balance frame for load tests.
Note: Stator vacuum pressure impregnated. Brake drum pulley and spring-balance dials for torque readings.
View Details
Spirit lamp (SKU JA-CE-4319) of die-pressed stainless steel sheet, 100 ml capacity, with a woven wick in a metal holder and a screw-on cap. Aluminium, brass and aluminium-and-glass versions with lid are also listed.
Note: Stainless steel, sheet die pressed; 100 ml capacity; woven wick in metal holder; screw-on cap.
View Details
Suspension clamp (SKU JA-CE-4331) for retort stands, of rugged design with a corrosion-resistant finish, used to hang apparatus such as springs, pendulums and weights securely from a stand during experiments.
Note: Rugged, corrosion-resistant suspension clamp for retort stands; size and material are confirmed on the quotation.
View Details
Square bosshead (SKU JA-CE-4336) with a black texture powder coating, used to join a rod and a clamp, or two rods, at a fixed right angle on a laboratory retort stand.
Note: Black texture powder coating; holds rod and clamp at a fixed 90-degree angle.
View Details
Structural Basin Model (SKU JA-ERAM-4406): geology model of a large-scale depression of rock strata formed by tectonic warping, with strata younger from the outside in. Size and material are confirmed on the quotation.
Note: Structural geology model of a basin; size, material and base are confirmed on the quotation.
View Details
Sand Dunes - Barchans Model (SKU JA-ERAM-4414): geography model of barchans, the crescent-shaped desert dunes formed by wind from one direction, for lessons on desert landforms. Size and material are confirmed on the quotation.
Note: Landform model of barchan sand dunes; size, material and base are confirmed on the quotation.
View Details
Structure of Earth 3D Model (SKU JA-ERAM-4443): rigid PVC wall model for lessons on the layers of the Earth, with markable washable surface, hard backing, aluminium frame and hooks. Size is confirmed on the quotation.
Note: Rigid PVC 3D wall model on the structure of the Earth; size is confirmed on the quotation.
View Details
Story of Earth 3D Model (SKU JA-ERAM-4444): rigid PVC wall model for lessons on the history of the Earth, with markable washable surface, hard backing, aluminium frame and hooks. Size is confirmed on the quotation.
Note: Rigid PVC 3D wall model on the history of the Earth; size is confirmed on the quotation.
View Details
Skip counting Game (JA-MLK-4469): wooden skip counting game played with marbles, for counting in steps and preparing for multiplication; board size and marble count are confirmed on the quotation.
Note: Wooden skip counting game with marbles.
View Details
Subtraction of 2-digit number (Magnetic) (JA-MLK-4473): magnetic wall-hanging board used with squares to solve two-digit subtraction problems, including borrowing from the tens.
Note: Magnetic wall board with squares for two-digit subtraction.
View Details
Sum of 3 angles of triangle (JA-MLK-4478): magnetic classroom demonstration set of 4 parts for proving that the three angles of a triangle add up to 180 degrees.
Note: Magnetic 4-part model proving the angle sum of a triangle.
View Details
Sum of 4 angles of quadrilateral (JA-MLK-4479): set of 5 parts for proving that every quadrilateral has an angle sum total of 360 degrees.
Note: 5-part set proving the angle sum of a quadrilateral is 360 degrees.
View Details
Stamps Set For 3 D Models (JA-MLK-4505): set of stamps of 3-D models for printing impressions of solid shapes in students' notebooks, for labelling and mensuration exercises in school maths.
Note: Set of stamps of 3-D models for notebook exercises.
View Details
Service Protractors (JA-MLK-4522): rectangular service protractors in ivorine plastic or anodised aluminium, plus an artillery protractor, for measuring angles and bearings on maps and drawings.
Note: Rectangular service protractors (ivorine plastic or anodised aluminium) and artillery protractor.
View Details
Set Square of Transparent Plastic (JA-MLK-4530): transparent plastic set squares for 45 and 60 degrees with bevelled edges, in 20 x 25 cm and 25 x 30 cm sizes, for technical drawing and geometry.
Note: Transparent 45 and 60 degree set squares with bevelled edges, 20 x 25 cm or 25 x 30 cm.
View Details
Semi Circular Block Glass: optically worked semicircular glass block, 4 in diameter and 15 mm thick, with all sides polished, for total internal reflection experiments.
Note: Polished semicircular glass block, 4 in diameter by 15 mm, for total internal reflection.
View Details
Stirring Rod Glass: soft glass stirring rod 6 in long and 5 mm in diameter with rounded ends, for stirring and transferring liquids in the laboratory.
Note: Soft glass stirring rods, 6 in by 5 mm, with rounded ends.
View Details
Scalpel Blades: dissecting scalpel blades No. 21, 22, 23 and 24, supplied in packets of 100 for making incisions in skin and muscle during biology dissection practicals.
Note: Scalpel blades No. 21 to 24, packets of 100.
View Details
Scalpel Handles Stainless Steel: No. 3 and No. 4 stainless steel scalpel handles that hold detachable blades, with a firm grip for dissection work in biology laboratories.
Note: Stainless steel scalpel handles No. 3 and No. 4.
View Details
Scalpel Knife Stainless Steel: a stainless steel scalpel knife in the standard 35 mm size, used for cutting specimens for observation and analysis in school and college dissection practicals.
Note: Stainless steel scalpel knife, standard size 35 mm.
View Details
Scalpel Knife Stainless Steel Heavy: a heavier-built stainless steel scalpel knife in the standard 35 mm size for cutting specimens in dissection practicals.
Note: Heavy stainless steel scalpel knife, 35 mm standard size.
View Details
Siphon Pump: a plastic siphon pump in a standard size for moving liquids from one container to another without pouring, supplied for laboratory use.
Note: Plastic siphon pump, standard size.
View Details
Solenoid with Terminals on Stand: a copper wire coil wound in cylindrical form, mounted on a stand with terminals, for studying the magnetic field produced by a current-carrying solenoid.
Note: Copper wire solenoid on a stand with terminals.
View Details
Sonometer: a hollow sounding box with two holes and a stretched string, used to study the modes of vibration of a stretched string in school and college physics practicals.
Note: Sonometer with hollow box and stretched string.
View Details
Spatula Chattaway Type: a metal multipurpose spatula about 6 in long, with one flat end and a spatula-shaped end turned up at 45 degrees, for handling solids in the laboratory.
Note: Metal Chattaway spatula, about 6 in, one end turned up at 45 degrees.
View Details
Spherometer (50mm): a 50 mm spherometer with lacquered brass disc and scales and black-painted steel legs, for measuring the radius of curvature of spherical surfaces in physics practicals.
Note: 50 mm spherometer with brass disc and scales and steel legs.
View Details.png)
Spring Balance (Tubular Transparent): transparent tubular spring balances with dual scales in grams and newtons, in 100 g/1 N, 250 g/2.5 N, 500 g/5 N and 1000 g/10 N ranges, for laboratory weighing.
Note: Transparent tubular spring balance, dual g/N scales to 1000 g/10 N.
View Details
Stomata Leaf Prepared Slide (SKU JC-BE-4834): prepared microscope slide of the stomata of a leaf, mounted on a good-quality slide for clear viewing, for observation in school, college and teacher-training biology practicals.
Note: Prepared microscope slide of the stomata of a leaf, mounted on a good-quality slide for clear viewing.
View Details
Spirogyra Prepared Slide (SKU JC-BE-4835): prepared microscope slide of Spirogyra, a filamentous green alga, accurately mounted on a good-quality glass slide for a clear view, for observation in school, college and teacher-training biology practicals.
Note: Prepared microscope slide of Spirogyra, a filamentous green alga, accurately mounted on a good-quality glass slide for a clear view.
View Details
Student Polarimeter (SKU JA-MI-4884): Laurent half-shade polarimeter with polariser, analyser and brass scale graduated 0-360ยฐ or 0-180ยฐ with vernier, accommodating a 200 mm glass tube, packed in a cardboard box, for optical activity practicals.
Note: Laurent half-shade student polarimeter with brass scale and vernier, for a 200 mm polarimeter tube.
View Details
Student Spirometer (SKU JA-MI-4885): 6 litre spirometer for vital capacity practicals, complete with corrugated tube, mouthpiece and recording lever, with counterbalanced float, calibrated pulley, inlet and outlet tubes, side cock and drain cock.
Note: 6 litre student spirometer with corrugated tube, mouthpiece and recording lever for physiology practicals.
View Details
Silica Basins (SKU JA-MI-4901): translucent silica basins with round bottom and spout, standing up to 1000ยฐC, in 20, 45, 70, 85, 100 and 200 ml capacities, for evaporation and ignition work in laboratories.
Note: Translucent silica basins with spout, up to 1000ยฐC, in 20 to 200 ml capacities.
View Details
Stainless Steel Forceps (SKU JA-MI-4902): straight fine-point forceps in grade 410 stainless steel, electrolytically polished, for handling specimens, weights and small parts in laboratories; length confirmed on the quotation.
Note: Straight fine-point forceps in electrolytically polished grade 410 stainless steel.
View Details
Silicon Rubber Cork (SKU JA-MI-4914): highly elastic silicone rubber cork for laboratory use, suitable for -50 to 250ยฐC and for autoclaving; sizes confirmed on the quotation.
Note: Highly elastic silicone rubber cork, -50 to 250ยฐC, autoclavable.
View Details
Spare Polythene Cover (SKU JA-MI-4927): tailor-made polythene dust cover for the range of experiments mounted in the universal structures frame, keeping apparatus free from dust; supplied as a spare or replacement.
Note: Tailor-made polythene dust cover for experiments mounted in the universal structures frame.
View Details
Square Analogs Stop Clock (SKU JA-MI-4943): square-case analogue stop clock for timing experiments and practical work in school and college laboratories; dial range and least count confirmed on the quotation.
Note: Square-case analogue stop clock for laboratory timing; specification confirmed on the quotation.
View Details
Steam Engine Model (SKU JA-LS-4958): demonstration model of a steam engine showing its mechanism and components and mimicking the action of a real engine, for physics laboratories. Size and drive are confirmed on the quotation.
Note: Demonstration model of a steam engine for physics teaching.
View Details
Student Binoculars (SKU JA-LS-4961): lightweight, rubber-covered binoculars in 8x or 10x magnification, waterproof, fog proof and nitrogen purged, with optical glass lenses. Supplied by JaincoLab.
Note: Lightweight student binoculars, 8x or 10x, rubber covered.
View Details
Solar System Model (SKU JA-LS-4967): tellurium model showing the orbits of the Earth and Moon and the Earth turning on its tilted axis; demonstrates seasons, changing day length, eclipses and the phases of the Moon.
Note: Tellurium model for seasons, day length, eclipses and phases of the Moon.
View Details
Slotted Weight Hook (SKU JA-LS-4991): steel hanger rod with hook for carrying slotted weights together, so the weights are not misplaced and can be hung and carried at once.
Note: Steel hook rod for carrying slotted weights.
View Details
Spirit Burner (SKU JA-LS-5029): spirit burner for laboratory heating, listed in stainless steel and brass.
Note: Laboratory spirit burner, stainless steel and brass.
View Details
SS Micro Spatula with Handle (SKU JA-LS-5038): small stainless steel spatula with a Bakelite handle or a blue or red PVC handle, for transferring small amounts of powders.
Note: Stainless steel micro spatula with Bakelite or PVC handle.
View Details
Stainless Steel Flask (SKU JA-LS-5040): laboratory flask made of stainless steel, listed size 300 mm.
Note: Stainless steel flask, listed size 300 mm.
View Details
SS Pan Tip Spatula (SKU JA-LS-5043): stainless steel spatula with a pan-shaped tip; the listing names medical throat examination as its use. Offered for teaching, training and laboratory use.
Note: Stainless steel pan tip spatula.
View Details
SS Ointment Spatula (SKU JA-LS-5049): stainless steel spatula with a flexible blade for mixing and spreading ointments in pharmaceutics practicals.
Note: Flexible stainless steel ointment spatula.
View Details
Spin Wings (SKU JA-LS-5057): PTFE stirring bars with Alnico V magnet for stirring in small conical and round centrifuge tubes and test tubes; one set has 2 of each size.
Note: Spin wing stirring bars for small tubes, 2 of each size per set.
View Details
Simple H Type Potometer (SKU JA-LS-5060): compact H-type potometer of die-moulded plastic with a 140 mm capillary tube, for measuring water uptake by a leafy shoot.
Note: Compact die-moulded plastic H-type potometer with 140 mm capillary tube.
View Details
Silica Crucible (SKU JA-LS-5067): low-form crucible with lid, glazed inside and outside, in 15, 25, 50, 80, 100, 150 and 200 ml capacities, for heating at very high temperatures.
Note: Low-form silica crucible with lid, 15 to 200 ml.
View Details
Spare Glass Bulb (SKU JA-LS-5092): replacement glass bulb for a Hero's engine, the steam reaction-turbine demonstration.
Note: Replacement glass bulb for a Hero's engine.
View Details.jpg)
Spatula Knife (Wooden) (SKU JA-LS-5102): stainless steel spatula knife with a wooden handle; the listing describes it for spreading strip wax thinly, as the metal retains heat. Reusable and easy to clean. Supplied by JaincoLab.
Note: Stainless steel spatula knife with wooden handle.
View Details
Sealer Machine (SKU JA-LS-5111): hand sealing machine with epoxy powder-coated aluminium cast body, sealing transformer, dual timer for sealing and cooling, 310 mm maximum sealing length, spare heater bar assembly included, no cutter.
Note: Hand sealing machine, dual timer, 310 mm maximum sealing length.
View Details
Student stimulator (SKU JA-PE-5118) for pharmacology and physiology teaching labs, used to apply an electrical stimulus to nerve-muscle preparations recorded on a kymograph; output range and power supply are confirmed on the quotation.
Note: Student stimulator for nerve-muscle experiments with a kymograph; output and supply details are confirmed on the quotation.
View Details
Simple cell (SKU JA-PE-5131) for voltaic cell practicals: a 150 x 100 mm glass jar with a zinc plate and a copper plate, each 150 x 50 mm and fitted with a terminal.
Note: Glass jar 150 x 100 mm with 150 x 50 mm zinc and copper plates, each fitted with a terminal.
View Details
Solar Pump Model (SKU JA-PE-5132): teaching model in which a solar panel runs a water pump, for lessons on energy conversion and solar water pumping; panel, pump and dimensions confirmed on the quotation. Supplied by JaincoLab.
Note: Solar pump teaching model for energy-conversion lessons; specification confirmed on the quotation.
View Details
Steam copper boiler (SKU JA-PE-5135) with a cylindrical body, conical top and short neck for a bung carrying a steam outlet tube for rubber tubing, in 1, 2 and 3 litre sizes, for heat practicals in physics labs.
Note: Copper steam boiler with a conical top and a bung carrying a steam outlet tube, listed in 1, 2 and 3 litre sizes.
View Details
Small Pox Face Model (SKU JC-BE-5174): anatomical / pathology teaching model depicting facial skin lesions of Smallpox (Variola), for classroom and laboratory teaching of infectious disease history and public health.
Note: Teaching model depicting facial skin lesions of Smallpox (Variola) for infectious disease history and public health classes.
View Details
Small Pox Scab Model (SKU JC-BE-5177): anatomical / pathology teaching model depicting crusting (scab) stage of smallpox skin lesions, for classroom and laboratory teaching of infectious disease history and public health.
Note: Teaching model depicting crusting (scab) stage of smallpox skin lesions for infectious disease history and public health classes.
View Details
Squamous Cell Carcinoma Model (SKU JC-BE-5188): anatomical / pathology teaching model depicting squamous cell carcinoma, for classroom and laboratory teaching of oncology and skin pathology.
Note: Teaching model depicting squamous cell carcinoma for oncology and skin pathology classes.
View Details
Small Pox Pustules Model (SKU JC-BE-5193): anatomical / pathology teaching model depicting pustular stage of smallpox skin lesions, for classroom and laboratory teaching of infectious disease history and public health.
Note: Teaching model depicting pustular stage of smallpox skin lesions for infectious disease history and public health classes.
View Details
Sand Fly Life Cycle Model (SKU JC-BE-5201): life cycle teaching model depicting sand fly life cycle: egg, larva, pupa and adult, for classroom and laboratory teaching of sand flies and leishmaniasis.
Note: Teaching model depicting sand fly life cycle: egg, larva, pupa and adult for sand flies and leishmaniasis classes.
View Details
Swine Flu H1na Virus (SKU JC-BE-5226): enlarged virus structure teaching model depicting structure of the swine flu H1N1 influenza virus, for classroom and laboratory teaching of influenza strains and virus structure.
Note: Teaching model depicting structure of the swine flu H1N1 influenza virus for influenza strains and virus structure classes.
View Details
Sodium Vapour Lamp with power supply (SKU JA-ELA-5262): sodium light source with its power supply for physics optics practicals. Lamp rating, housing and supply details are confirmed on the quotation. Supplied by JaincoLab.
Note: Sodium vapour lamp with power supply as a monochromatic light source for optics practicals; ratings are confirmed on the quotation.
View Details
Sodium Vapour Lamp (SKU JA-ELA-5263): lamp that produces light from sodium in an active, vapour form; the listing names high pressure and low pressure types. Rating and type supplied are confirmed on the quotation. Supplied by JaincoLab.
Note: Sodium vapour lamp in high or low pressure types; rating and type are confirmed on the quotation.
View Details
Stool Container (SKU JA-ELA-5282): container for collecting a stool sample and taking it to the laboratory for examination, for clinical and microbiology training labs. Material, capacity and closure are confirmed on the quotation. Supplied by JaincoLab.
Note: Stool sample container for training and laboratory use; material, capacity and closure are confirmed on the quotation.
View Details
Surgeon Cap, Disposable (SKU JA-ELA-5346): male and female surgeon caps in green, light blue or white fast-colour cotton or casement cloth, used to cover the hair in laboratories and medical institutions. Supplied by JaincoLab.
Note: Surgeon caps (male/female) in green, light blue or white fast-colour cotton or casement cloth, to cover the hair during lab work.
View Details
Solar Cell (SKU JA-ELA-5364): solar cell model designed to study the fundamentals of solar cells in school and college physics, supplied well packed. Cell size, voltage and current are confirmed on the quotation. Supplied by JaincoLab.
Note: Solar cell model for studying the fundamentals of solar cells; electrical ratings are confirmed on the quotation.
View Details
Second Law of Motion Apparatus (SKU JA-ELA-5384): spring-driven apparatus on a heavy metal casting with visible mechanism, two-tension spring gun, 25 cm long with 10 mm rod for clamping, complete with two steel balls.
Note: Spring-driven metal apparatus for demonstrating Newton's second law of motion, supplied with two steel balls.
View Details
Slide Staining Rack (SKU JA-ELA-5409): rack with a handle for staining up to 25 standard microscope slides at the same time, designed for use with a staining dish. Material is confirmed on the quotation. Supplied by JaincoLab.
Note: Slide staining rack with handle for up to 25 standard microscope slides.
View Details
Safety Goggles (SKU JA-ELA-5411): impact resistant and splash resistant goggles worn to shield the eyes from chemicals during laboratory work; various types are offered by use. Type is confirmed on the quotation. Supplied by JaincoLab.
Note: Impact and splash resistant safety goggles for laboratory work, in various types.
View Details
Set Square with Protector (SKU JA-ELA-5413): set square with protractor (listed as "protector") for accurate measurement of angles and lengths in school and college drawing work; a complete geometry set is also available. Supplied by JaincoLab.
Note: Set square with protractor for measuring angles and lengths; complete geometry set also available.
View Details
Slotted Weights with Hanger (SKU JA-ELA-5416): slotted weight stand with a 50 g hanger and hook, nine 20 g, one 10 g and one 5 g slotted weights, and a carrying handle for transport and storage.
Note: Slotted weights on a stand: 50 g hanger with hook, nine 20 g, one 10 g and one 5 g weights.
View Details
Soil Hydrometer (SKU JA-ELA-5417): clear glass hydrometer with engraved density scale 0.995 to 1.030 g/cc at 27 ยฐC, smallest division 0.0005, for grain size analysis of soils with more than 10% passing the 75 micron sieve.
Note: Glass soil hydrometer, density scale 0.995 to 1.030 g/cc at 27 ยฐC, division 0.0005.
View Details
Soil Moisture Meter (SKU JA-ELA-5418): digital LCD meter, range 7% to 40%, accuracy ยฑ 3%, automatic temperature compensation, 600 mm sensor, 4 x 1.5 V batteries, body 200 x 120 x 55 mm, about 3 kg. Supplied by JaincoLab.
Note: Digital soil moisture meter, 7% to 40%, ยฑ 3%, with 600 mm sensor and automatic temperature compensation.
View Details
Specimen Jar (SKU JA-ELA-5419): transparent specimen jar with a tight-fitting cap for preserving biological specimens in the laboratory; diameter 50 mm, height 150 mm.
Note: Transparent specimen jar with tight-fitting cap, 50 mm diameter, 150 mm high.
View Details
Stage Micrometer Slide (SKU JA-ELA-5420): 1 mm scale divided into 100 divisions, centred and mounted on a 1 x 3 inch slide, for calibrating eyepiece reticles and objective magnifications. Supplied by JaincoLab.
Note: Stage micrometer, 1 mm in 100 divisions, on a 1 x 3 inch slide.
View Details
Staining Jar (SKU JA-ELA-5421): jar for staining slides and specimens, in eleven sizes (height x diameter, cm): 10 x 3.15, 15 x 5, 20 x 5, 25 x 5, 30 x 5, 20 x 7.5, 25 x 7.5, 30 x 7.5, 37.5 x 7.5, 15 x 10 and 20 x 10.
Note: Staining jar in eleven sizes from 10 x 3.15 cm to 37.5 x 7.5 cm (height x diameter).
View Details
Safety and Control in Heating Systems (SKU JA-ELA-5448): test stand for heating safety and control fittings in compressed-air and closed water circuits, 800 W heater, PC data acquisition. Supplied by JaincoLab.
Note: Test stand for heating safety and control fittings with water and compressed-air circuits and PC data acquisition.
View Details
Safety Devices Training Panel (SKU JA-ELA-5449): panel with an electrically heated pressure vessel, safety devices for a sealed water heater, thermal discharge device with blow-off pipe, pressure and temperature display. Supplied by JaincoLab.
Note: Training panel on water heater safety devices with electrically heated pressure vessel and thermal discharge device.
View Details
Shaft Sensor (SKU JA-ELA-5454): sensor listed among meteorological instruments; the product data gives no technical details, so type, measuring range and output are confirmed on the quotation. Supplied by JaincoLab.
Note: Shaft sensor listed among meteorological instruments; specifications are confirmed on the quotation.
View Details
Submersible Level Sensor (SKU JA-ELA-5455): submersible level transmitter that measures liquid level from the hydrostatic pressure in the fluid; rugged, compact, easily removable and designed to prevent clogging. Supplied by JaincoLab.
Note: Submersible hydrostatic level transmitter; range and output confirmed on the quotation.
View Details
Suspended Soil Indicator (SKU JA-ELA-5456): microprocessor-based, multi-range indicator with a solid-state optical sensor for measuring suspended solids in aqueous solutions. Ranges are confirmed on the quotation. Supplied by JaincoLab.
Note: Multi-range suspended solids indicator with solid-state optical sensor.
View Details
Schistosoma in Copula (SKU JA-ELA-5482): parasitology teaching item showing the blood fluke Schistosoma as a male and female pair; form and size confirmed on the quotation. Supplied by JaincoLab.
Note: Parasitology teaching item showing a male and female Schistosoma in copula.
View Details
Sliding Microtome (SKU JA-ELA-5489): hand-operated sliding microtome with 27 cm track and micrometer object feed; 1-50 micron sections in 1 micron steps; 31 x 26 mm object stage; wooden case with razor, honing plate, 3 object holders.
Note: Sliding microtome for paraffin and celloidin sections from 1 to 50 microns.
View Details
Sledge Microtome (SKU JA-ELA-5490): large sledge microtome with 400 mm knife slideways, 30 x 30 mm object clamp and 1-10 micron feed in 0.5 micron steps; for paraffin and celloidin sections of large or hard specimens. Supplied by JaincoLab.
Note: Large sledge microtome for thin paraffin and celloidin sections of large or hard specimens.
View Details
Sharpening Stone (SKU JA-ELA-5491): honing stone, size 8 (20 cm), with a coarse side for repairing damaged edges and a fine side for polishing the edge of knives and other blades. Supplied by JaincoLab.
Note: Dual-grit honing stone, 20 cm, with coarse and fine sides.
View Details
Sparkler Filters (SKU JA-ELA-5510): zero hold-up sparkler plate filters in SS 304, 316 or 316L with optional PP, Halar, PTFE (PFA) or PVDF lining; sizes 8, 14, 18, 24 and 33; backwash; GMP trolley model. Supplied by JaincoLab.
Note: Zero hold-up sparkler plate filters in stainless steel, sizes 8 to 33, with backwash.
View Details
Supercritical Fluid Extraction (SKU JA-ELA-5511): extraction equipment using a fluid above its critical point as the solvent; configuration and specifications are confirmed on the quotation. Supplied by JaincoLab.
Note: Supercritical fluid extraction equipment; specifications confirmed on the quotation.
View Details
Shear Legs (SKU JA-ELA-5517): bench-top double shear legs on rollers with integral spring balances in the legs, adjustable tie chain, adjustable backstay with spring balance and apex load hanger; for forces in three dimensions. Supplied by JaincoLab.
Note: Bench-top shear legs apparatus with spring balances for leg and backstay forces.
View Details
Shearing Force Apparatus (SKU JA-ELA-5518): bench-mounted split beam joined by ball-bearing rollers, with spring balance for shear force and tension spring for bending moment; movable loads and supports; influence-line strip. Supplied by JaincoLab.
Note: Split-beam apparatus for measuring shear force and studying influence lines.
View Details
Porcelain spot plate with 6 cavities for drop tests, indicator checks and small-scale reactions in chemistry practicals.
Note: Six-cavity porcelain spot plate. Used for drop-scale tests in chemistry.
View Details
Manually operated mercury-type sphygmomanometer for teaching use, supplied by JaincoLab: inflatable velcro cuff, rubber bulb with non-return valve and air-release screw, rubber tubing, metal box.
Note: Mercury-type sphygmomanometer supplied for teaching and training use.
View Details
Combustion spoon on stainless steel wire, 150 mm long, and a steel deflagrating spoon with an aluminium flange, for burning small samples inside a gas jar.
Note: Stainless steel combustion spoon, 150 mm long, and a steel deflagrating spoon with aluminium flange.
View Details
Laboratory stoppers supplied by JaincoLab: rubber stoppers in solid, one-hole and two-hole forms in mixed sizes, and assorted corks, for closing flasks and test tubes and holding glass tubing.
Note: Solid, one-hole and two-hole rubber stoppers in mixed sizes, plus assorted corks.
View Details
Steel springs, 30 cm long and 6 mm in diameter, that stretch by 15 cm with a 250 g load, for Hooke's law and oscillation experiments.
Note: 30 cm steel springs, 6 mm diameter, extending 15 cm under 250 g.
View Details
Small spotlight bulbs supplied by JaincoLab in three ratings, 4.5 V 0.3 A, 2.5 V 0.2 A and 1.5 V 0.2 A, for simple circuits and ray boxes.
Note: Spotlight bulbs rated 4.5 V 0.3 A, 2.5 V 0.2 A and 1.5 V 0.2 A.
View Details
Self Inflicted Wounds on Forearm Model (SKU JC-BE-5838): forensic medicine teaching model showing hesitation-cut pattern on the forearm, for MBBS forensic medicine and forensic science teaching.
Note: Teaching model depicting hesitation-cut wound pattern on the forearm associated with self-inflicted injury for medico-legal wound pattern study classes.
View Details
Skull Injury Model (SKU JC-BE-5839): forensic medicine teaching model depicting traumatic skull fracture and associated injury for medico-legal head-injury study, for classroom and laboratory teaching of medico-legal head injury study.
Note: Teaching model depicting traumatic skull fracture and associated injury for medico-legal head-injury study for medico-legal head injury study classes.
View Details
Snake Bite by Viper Model (SKU JC-BE-5841): forensic medicine and toxicology teaching model depicting viper bite wound and associated local tissue changes from envenomation, for classroom and laboratory teaching of toxicology of snake envenomation.
Note: Teaching model depicting viper bite wound and associated local tissue changes from envenomation for toxicology of snake envenomation classes.
View Details
Sulphuric Acid Vitriolage Model (SKU JC-BE-5842): forensic medicine teaching model depicting sulphuric acid burn injury (vitriolage) and associated tissue damage, for classroom and laboratory teaching of chemical injury study.
Note: Teaching model depicting sulphuric acid burn injury (vitriolage) and associated tissue damage for chemical injury study classes.
View Details
Suicidal Shot with Pistol Model (SKU JC-BE-5845): forensic medicine teaching model depicting firearm wound with features associated with a self-inflicted, contact-range pistol shot, for classroom and laboratory teaching of firearm injury study.
Note: Teaching model depicting firearm wound with features associated with a self-inflicted, contact-range pistol shot for firearm injury study classes.
View Details
Sickle Cell Anemia Model (SKU JC-BE-5879): teaching model showing the genetic basis of sickle cell disease and its effect on red blood cell shape. Size and material are confirmed on the quotation.
Note: The genetic basis of sickle cell disease and its effect on red blood cell shape for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.
View Details
Single Pass Transmembrane Protein Model (SKU JC-BE-5885): teaching model showing a single-pass transmembrane protein spanning the lipid bilayer. Size and material are confirmed on the quotation.
Note: A single-pass transmembrane protein spanning the lipid bilayer for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.
View Details
Skeletons (SKU JA-AM-5910): a listing covering a disarticulated 200-bone adult skeleton with 3-part skull, a 170 cm articulated PVC skeleton on a 16-inch metal base and an 85 cm PVC skeleton with nerves and blood vessels.
Note: Listing of three skeleton variants for anatomy teaching; each variant is quoted separately.
View Details
Skulls and infant skulls (SKU JA-AM-5911): life-size adult skull in PVC, 3 parts, with movable jaw, cut calvarium and suture lines and 3 removable lower teeth (incisor, cuspid, molar); infant skull options are confirmed on the quotation.
Note: Life-size 3-part PVC adult skull listing; infant skull options confirmed on the quotation.
View Details
Semi-micro balance (SKU JA-CE-6142) with a dual range of 30 g at 0.01 mg and 182 g at 0.1 mg, internal calibration with built-in weight, under-hook, VFD display, stainless steel 90 mm pan and RS 232C output. Supplied by JaincoLab.
Note: Repeatability 0.02 mg; linearity +/-0.03 mg; response 3-4 s; AC adaptor 220 V, 50-60 Hz; optional density kit.
View Details
Staphylococcal Species and Disease Model (SKU JC-BE-6176): teaching model showing the key Staphylococcus species and their associated diseases. Size and material are confirmed on the quotation.
Note: The key Staphylococcus species and their associated diseases for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.
View Details
Streptococcus Species and Disease Model (SKU JC-BE-6178): teaching model showing the key Streptococcus species, their haemolysis patterns and associated diseases. Size and material are confirmed on the quotation.
Note: The key Streptococcus species, their haemolysis patterns and associated diseases for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.
View Details
Structure and Replication of Herpes Virus Model (SKU JC-BE-6221): teaching model showing herpesvirus structure, replication and latency. Size and material are confirmed on the quotation.
Note: Herpesvirus structure, replication and latency for classroom and laboratory teaching. Dimensions and material are confirmed on the quotation.
View Details
Newton spring balance (SKU JA-CE-6275) of flat form with a hook and a lacquered brass scale, offered in seven capacities: 1 N, 2 N, 5 N, 10 N, 20 N, 50 N and 100 N, for force measurement in school and college physics.
Note: Capacities A-G: 1 N, 2 N, 5 N, 10 N, 20 N, 50 N, 100 N; flat form; lacquered brass scale; hook.
View Details
Plastic tubular spring balance (SKU JA-CE-6276), 250 mm long, colour-coded by range, with dual gram and newton scale, visible spring and zero adjustment, in six capacities from 250 g / 2.5 N to 5000 g / 50 N.
Note: Capacities A-F: 250 g/2.5 N (5 g/0.05 N), 500 g/5 N (10 g/0.1 N), 1000 g/10 N (20 g/0.2 N), 2000 g/20 N (40 g/0.4 N), 3000 g/30 N (60 g/0.6 N), 5000 g/50 N (100 g/1.0 N).
View Details
Survey lab equipments (SKU JA-SE-6438): chain, ranging rods, 4 m aluminium staff, prismatic compass, dumpy and IOP levels, theodolite, plane table with alidade, optical square, planimeter, pantograph and drawing boards.
Note: List of surveying laboratory instruments quoted singly or as a complete laboratory by JaincoLab.
View Details
Silicone rubber septa (SKU JA-PLE-6452) that seal the injection port of a gas chromatograph, standard size 3/8" diameter x 1/8" thick with other sizes on request, supplied by JaincoLab for analytical and pharmaceutical analysis labs.
Note: Silicone rubber GC septa, standard 3/8" diameter x 1/8" thick; other sizes on request.
View Details
Syringes for gas chromatography (SKU JA-PLE-6453): gas tight syringes in 50, 100, 250, 500, 1000 and 2500 microlitre capacities and liquid injection syringes in 1, 10 and 50 microlitre, supplied by JaincoLab for GC sample injection.
Note: Gas tight syringes 50 to 2500 microlitre and liquid injection syringes 1, 10 and 50 microlitre for gas chromatography.
View Details
Stirred Tank Test Stand (SKU JA-AM-6475): multivariable temperature and level control on an electrically heated double-walled stirred tank with feed-product heat exchanger and pneumatic level valve.
Note: Stirred tank temperature and level control test stand; supplied by JaincoLab.
View Details
Manifold membrane filtration unit for sterility testing: SS holders for 47 mm membranes, silicone tubing and glass stopcocks to flushing outlets, 12.5 sq cm filtration area, 250 ml holding capacity; used with a vacuum pump and trap flask.
Note: Manifold sterility test unit with SS 47 mm filter holders, 12.5 sq cm area, 250 ml capacity.
View Details
Static Pass Box (SKU JA-CAE-6557): SS or MS enclosure with mechanical or electromagnetic interlocked doors, tempered glass, buzzer, fluorescent light and indicator lamps, UV light with hour meter, floor or wall mounted, four sizes; HEPA filter optional.
Note: Static pass box without blower for material transfer between clean areas; UV lamp and HEPA filter are listed as options.
View Details
Sampling Booth (SKU JA-CAE-6562): HEPA down-flow booth for weighing and dispensing pharmaceutical powders, recirculated or exhaust type, manometer or Magnehelic gauge, SS double-skin walls, acrylic walls, mini-pleat HEPA supply and fine return filter.
Note: Down-flow sampling booth with suction filter at the bottom to trap airborne powder; recirculated or exhaust type.
View Details
Sterile Garment Cabinet (SKU JA-CAE-6565): enclosed storage cabinet for clean room garments with blower and HEPA filter, built of powder-coated steel sheet; size is confirmed on the quotation.
Note: HEPA-filtered clean room garment storage cabinet in powder-coated steel; size and hanger capacity are confirmed on the quotation.
View Details
Slide projector for 35 mm slides supplied by JaincoLab, offered as an automatic magazine projector or as a manually operated model for economical slide presentation.
Note: 35 mm slide projector, automatic magazine or manual model, supplied by JaincoLab.
View Details
Senior A4 Portable OHP With Triple Projection Lens (SKU JA-M-6581): A4 portable overhead projector with a 3-element vario-focal 280 mm to 340 mm projection lens; other specifications as for model OHP015, confirmed on the quotation.
Note: A4 portable overhead projector with a 3-element vario-focal 280-340 mm lens, supplied by JaincoLab; OHP accessories available.
View Details
Semi Automatic Rotary Microtome (SKU JA-M-6591): section and trimming thickness 0.25-60 microns, minimum setting 0.25 micron, LCD display of thickness and section count, lockable hand wheel, waste tray, interchangeable specimen clamp, safety alarm.
Note: Semi-automatic rotary microtome, section and trimming thickness 0.25-60 microns, with LCD and lockable hand wheel.
View Details
Student spectrometer for prism angle, refractive index and wavelength measurements: heavy metal base, grooved prism table, fixed 150 or 175 mm circle, two verniers reading 30 seconds of arc, rack-and-pinion collimator; plywood cabinet.
Note: Student spectrometer, 150 or 175 mm circle with two verniers reading to 30 seconds of arc, in a plywood cabinet.
View Details
Semi-automatic chemistry analyzer supplied by JaincoLab for turbidimetry tests and chemistry assays in teaching and laboratory settings; offered in several specifications, confirmed on the quotation.
Note: Semi-automatic chemistry analyzer for turbidimetry and chemistry assays, supplied by JaincoLab.
View Details
Wooden Stevenson screen, small or large, giving a ventilated, shaded enclosure that shields thermometers and other instruments from direct sun and rain while air circulates; made to the buyer specification.
Note: Wooden Stevenson screen in small and large sizes, made to specification.
View Details
Sunshine recorder for recording hours of bright sunshine at meteorological stations: the bowl focuses sunlight on a record card; supplied with one year of recording cards and a standard stencilled curve for comparison.
Note: Sunshine recorder supplied with one year of recording cards and a standard stencilled curve.
View Details
Scalpel Blade 12 (SKU JA-DE-6802): size 12 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 3 scalpel handle. Supplied by JaincoLab.
Note: Size 12 sterile carbon steel scalpel blade for the No. 3 handle, supplied by JaincoLab.
View Details
Scalpel Blade 15 (SKU JA-DE-6804): size 15 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 3 scalpel handle. Supplied by JaincoLab.
Note: Size 15 sterile carbon steel scalpel blade for the No. 3 handle, supplied by JaincoLab.
View Details
Scalpel Blade 10 (SKU JA-DE-6806): sterile, disposable carbon steel scalpel blade, size 10, individually packed in quick-peel aluminium foil, for the No. 3 scalpel handle. Supplied by JaincoLab.
Note: Size 10 sterile carbon steel scalpel blade for the No. 3 handle, supplied by JaincoLab.
View Details
Scalpel Blade 11 (SKU JA-DE-6808): size 11 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 3 scalpel handle. Supplied by JaincoLab.
Note: Size 11 sterile carbon steel scalpel blade for the No. 3 handle, supplied by JaincoLab.
View Details
Scalpel Blade 20 (SKU JA-DE-6809): size 20 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 4 scalpel handle. Supplied by JaincoLab.
Note: Size 20 sterile carbon steel scalpel blade for the No. 4 handle, supplied by JaincoLab.
View Details
Scalpel Blade 21 (SKU JA-DE-6811): size 21 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 4 scalpel handle. Supplied by JaincoLab.
Note: Size 21 sterile carbon steel scalpel blade for the No. 4 handle, supplied by JaincoLab.
View Details
Scalpel Blade 22 (SKU JA-DE-6812): size 22 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 4 scalpel handle. Supplied by JaincoLab.
Note: Size 22 sterile carbon steel scalpel blade for the No. 4 handle, supplied by JaincoLab.
View Details
Scalpel Blade 23 (SKU JA-DE-6815): size 23 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 4 scalpel handle. Supplied by JaincoLab.
Note: Size 23 sterile carbon steel scalpel blade for the No. 4 handle, supplied by JaincoLab.
View Details
Scalpel Blade 24 (SKU JA-DE-6817): size 24 sterile, disposable carbon steel scalpel blade, individually packed in quick-peel aluminium foil, for the No. 4 scalpel handle. Supplied by JaincoLab.
Note: Size 24 sterile carbon steel scalpel blade for the No. 4 handle, supplied by JaincoLab.
View Details
Scalpel Handle Size 3 (SKU JA-DE-6819): strong, slotted alloy scalpel handle accepting blade sizes 11 to 15, for dissection and specimen preparation.
Note: No. 3 slotted alloy scalpel handle for blade sizes 11 to 15.
View Details
Scalpel Handle Size 4 (SKU JA-DE-6824): strong, slotted alloy scalpel handle accepting blade sizes 20 to 24, for dissection of larger specimens.
Note: No. 4 slotted alloy scalpel handle for blade sizes 20 to 24.
View Details
Scalpel with handle length 130mm (SKU JA-DE-6827): steel scalpel with a 130 mm handle and 45 mm blade, for general cutting in dissection practicals.
Note: Steel scalpel with a 130 mm handle and 45 mm blade.
View Details
Seekers (SKU JA-DE-6838): plain stainless steel seekers with a 35 mm blunt-end needle, 70 mm long including the handle, for tracing and separating structures in dissection.
Note: Stainless steel seekers with 35 mm blunt-end needle, 70 mm overall.
View Details
Simulating Natural Selection (SKU JA-GAIE-6897): peppered moth activity with tree-trunk colour backgrounds and moth cut-outs, in a game-like format. Supplied by JaincoLab.
Note: Peppered moth natural selection simulation, supplied by JaincoLab.
View Details
Simple Cell Kit (SKU JA-LE-6929): glass jar, 150 mm high x 100 mm diameter, supplied complete with zinc and copper plates for building a simple voltaic cell in school and college electrochemistry practicals. JaincoLab.
Note: Glass jar 150 mm high x 100 mm diameter, supplied with zinc and copper plates.
View Details
Simple Cell Plate Carbon 6mm (SKU JA-LE-6936): carbon electrode plate, 6 mm thick, 125 x 50 mm, fitted with 4 mm socket terminals, for building simple cells in school and college electrochemistry practicals. JaincoLab.
Note: Carbon plate for simple cells, 125 x 50 mm and 6 mm thick, with 4 mm socket terminals.
View Details
Simple Cell Plate Copper 1.5mm (SKU JA-LE-6937): copper electrode plate, 1.5 mm thick, 125 x 50 mm, fitted with 4 mm socket terminals, for building simple cells in school and college electrochemistry practicals. JaincoLab.
Note: Copper plate for simple cells, 125 x 50 mm and 1.5 mm thick, with 4 mm socket terminals.
View Details
Simple Cell Plate Lead 1.5mm (SKU JA-LE-6938): lead electrode plate, 1.5 mm thick, 125 x 50 mm, fitted with 4 mm socket terminals, for building simple cells in school and college electrochemistry practicals. JaincoLab.
Note: Lead plate for simple cells, 125 x 50 mm and 1.5 mm thick, with 4 mm socket terminals.
View Details
Simple Cell Plate Zinc 1.5mm (SKU JA-LE-6940): zinc electrode plate, 1.5 mm thick, 125 x 50 mm, fitted with 4 mm socket terminals, for building simple cells in school and college electrochemistry practicals. JaincoLab.
Note: Zinc plate for simple cells, 125 x 50 mm and 1.5 mm thick, with 4 mm socket terminals.
View Details
Simple Gas Preparation Kit (SKU JA-LE-6941): plastic tank with lid, test tube stand, 5 test tubes 150 x 24 mm with stoppers, thistle funnel, side-arm test tube with one-hole stopper, gas shelf, delivery tube and connector, for collecting gases over water.
Note: Kit for preparing gases such as oxygen, hydrogen and carbon dioxide and collecting them over water; the tank and lid store all parts.
View Details
Smoke Cell (SKU JA-LE-6942) for observing Brownian motion: preset light focus, cylindrical condensing lens, 12 V 3 W festoon bulb, flanges for standard microscopes, 90 x 46 x 20 mm; with instructions and a squeeze-bottle smoke generator.
Note: Smoke cell for viewing Brownian motion under a microscope, supplied with instructions and a squeeze-bottle smoke generator.
View Details
Steam Syringe & Jacket (SKU JA-LE-6943): graduated glass syringe in a borosilicate glass jacket, rubber bungs at both ends with steam inlet and outlet tubes and a hole for a standard thermometer (not supplied); for molar mass of volatile liquids.
Note: For determining the molar mass of volatile liquids boiling below 80ยฐC; thermometer not supplied.
View Details
Steam Trap (SKU JA-LE-6944): cylindrical borosilicate glass tube fitted with rubber bungs on both ends, for use in steam apparatus such as the steam syringe and jacket. JaincoLab.
Note: Cylindrical borosilicate glass steam trap with rubber bungs at both ends; size confirmed on the quotation.
View Details
Simulated Diabetes Testing (SKU JA-HE-6949): case-study kit with medical histories and simulated blood and urine samples for testing and planning diabetes management. Supplied by JaincoLab.
Note: Simulated diabetes testing case-study kit, supplied by JaincoLab.
View Details
Substance Abuse Tumble and Teach (SKU JA-HE-6953): Tumble 'n Teach discussion cube on the effects of tobacco, alcohol and drugs, for counselling and class discussion. Supplied by JaincoLab.
Note: Tumble 'n Teach discussion cube on substance abuse, supplied by JaincoLab.
View Details
Skin Microslide (SKU JA-HBE-6973): Microslide lesson set of eight 35 mm photomicrographs on the skin, with arrows, callouts and a text folder. Viewer supply confirmed on the quotation.
Note: Microslide set of eight labelled 35 mm photomicrographs on the skin, supplied by JaincoLab.
View DetailsSkeleton System Microslide (SKU JA-HBE-6988): Microslide lesson set of eight 35 mm photomicrographs on the skeletal system, with arrows, callouts and a text folder. Viewer supply confirmed on the quotation.
Note: Microslide set of eight labelled 35 mm photomicrographs on the skeletal system, supplied by JaincoLab.
View Details
Slime Black 140g (SKU JA-M-6991): black polymer slime, 140 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Black polymer slime, 140 g pack; keep well sealed to prevent drying out.
View Details
Slime Black 50g (SKU JA-M-6992): black polymer slime, 50 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Black polymer slime, 50 g pack; keep well sealed to prevent drying out.
View Details
Slime Blue 140g (SKU JA-M-6993): blue polymer slime, 140 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Blue polymer slime, 140 g pack; keep well sealed to prevent drying out.
View Details
Slime Blue 50g (SKU JA-M-6995): blue polymer slime, 50 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Blue polymer slime, 50 g pack; keep well sealed to prevent drying out.
View Details
Slime Green 140g (SKU JA-M-6996): green polymer slime, 140 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Green polymer slime, 140 g pack; keep well sealed to prevent drying out.
View Details
Slime Green 50g (SKU JA-M-6998): green polymer slime, 50 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Green polymer slime, 50 g pack; keep well sealed to prevent drying out.
View Details
Slime Red 140g (SKU JA-M-6999): red polymer slime, 140 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Red polymer slime, 140 g pack; keep well sealed to prevent drying out.
View Details
Slime Red 50g (SKU JA-M-7000): red polymer slime, 50 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Red polymer slime, 50 g pack; keep well sealed to prevent drying out.
View Details
Slime Yellow 140g (SKU JA-M-7002): yellow polymer slime, 140 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Yellow polymer slime, 140 g pack; keep well sealed to prevent drying out.
View Details
Slime Yellow 50g (SKU JA-M-7004): yellow polymer slime, 50 g pack, that flows if left for a time but breaks or snaps if pulled apart quickly; keep well sealed to prevent drying out. Supplied by JaincoLab.
Note: Yellow polymer slime, 50 g pack; keep well sealed to prevent drying out.
View Details
Smart Color Starter Pack (SKU JA-M-7005): 1 ml of each thermochromic pigment paste, 1 g glow-in-the-dark pigment powder and a 20 ml syringe of acrylic medium; water-soluble and applied like acrylic paint. Supplied by JaincoLab.
Note: Thermochromic and glow-in-the-dark pigments with acrylic medium; the number of thermochromic colours is confirmed on the quotation.
View Details
Smart Materials Presentation Pack (SKU JA-M-7006): a wide array of smart and unusual materials for presentations and demonstrations, with a smart materials reference book and handling accessories, in a 46 x 33 x 15 cm carry case. Supplied by JaincoLab.
Note: Carry case of smart and unusual materials with a reference book; the materials list is confirmed on the quotation.
View Details
Skeleton Model with frame, Life Size (SKU JA-HBE-7056): ISG life-size plastic skeleton with detachable skull, removable cranium, full set of permanent teeth and movable joints, on a frame. Supplied by JaincoLab.
Note: ISG life-size plastic skeleton on a frame, supplied by JaincoLab.
View Details
Skeleton Model With Muscles and Joint Ligaments (SKU JA-HBE-7057): ISG life-size skeleton with colour-differentiated muscles and ligaments, movable bones and a heavy wheeled base. Supplied by JaincoLab.
Note: ISG life-size skeleton with muscles and joint ligaments on a wheeled base, supplied by JaincoLab.
View Details
Skin Section Model (SKU JA-HBE-7059): model of the three layers of the skin of the head, with hair follicles and sweat glands, sebaceous glands, receptors, nerves and vessels.
Note: Skin section model showing three layers of head skin, made by JaincoLab.
View Details
Silicone Oil 50ml (SKU JA-MCE-7068): general-purpose silicone oil in a 50 ml bottle for lubricating glassware joints, stopcocks, valves and similar apparatus parts; water-resistant film, stable over a wide temperature range. Supplied by JaincoLab.
Note: General-purpose silicone oil lubricant, 50 ml bottle.
View Details
Syringe Disposable Plastic (SKU JA-MCE-7077): 2 ml disposable plastic syringe for dispensing small liquid volumes in microscale chemistry experiments; part of the microscale spares range. Supplied by JaincoLab.
Note: Disposable plastic syringe, 2 ml, for microscale work; laboratory use only.
View Details
Student Kit (SKU JA-MSE-7085): individual microscale chemistry kit built on the Combo plate system, letting a student perform more than a hundred chemical experiments that previously needed full-size apparatus. Supplied by JaincoLab.
Note: Individual microscale chemistry kit for over 100 experiments; contents confirmed on the quotation.
View Details
Systems of the Human Body Poster (SKU JA-HBE-7089): 890 x 585 mm wall poster showing the skeletal, circulatory, immune, digestive, urinary, respiratory, muscular, integumentary, endocrine, nervous and reproductive systems.
Note: An 890 x 585 mm wall poster of the major human body systems, supplied by JaincoLab.
View Details
Sight and Sound Health (SKU JA-HBE-7091): kit for investigating sight and hearing, with vision disk, rubber balls, lenses, eye chart, masks, pinhole viewer, flashlight, activities and teacher's guide.
Note: Sight and hearing investigation kit with activities and teacher's guide, supplied by JaincoLab.
View Details
Solids and Liquids Science Kit (SKU JA-MSE-7154): classroom activity kit on solids and liquids for individual or small-group use; activities include comparing solids and liquids; how some solids behave like liquids. Supplied by JaincoLab.
Note: Classroom activity kit on solids and liquids; contents confirmed on the quotation.
View Details
Silicone Oil (SKU JA-MSE-7163): silicone oil lubricant in a 50 ml bottle for ground-glass joints, stopcocks, valves and O-rings on laboratory glassware and apparatus; listed as giving a thicker film than typical spray lubricants. Supplied by JaincoLab.
Note: Silicone oil lubricant, 50 ml bottle, for glass joints, stopcocks, valves and O-rings.
View DetailsStearic acid Saturated fat Molecular model kit (SKU JA-MME-7172): self-assembly molecular model kit of stearic acid, an 18-carbon saturated fatty acid. Supplied in a durable storage case with compartments; part count confirmed on the quotation.
Note: Self-assembly stearic acid molecular model kit, supplied by JaincoLab.
View Details
Sucrose Molecular Model (SKU JA-MME-7175): self-assembly molecular model kit of sucrose, the disaccharide formed from glucose and fructose. Includes one molecule of 45 atom parts, 46 links and 1 tool.
Note: Self-assembly sucrose molecular model kit, supplied by JaincoLab.
View Details
Student Titration Kit (SKU JA-MSE-7177): self-contained micro-titration kit for secondary school experiments; typical reproducibility coefficient 0.98, readings to 2 decimal places and results comparable with Class B glassware. Supplied by JaincoLab.
Note: Self-contained student micro-titration kit; contents confirmed on the quotation.
View Details
Solar System Teachers Guide (SKU JA-AE-7197): teacher's guide for use with the Exploring the Solar System lesson materials. Supplied by JaincoLab.
Note: Teacher's guide for the Exploring the Solar System materials.
View Details
Solar System Planet Poster (SKU JA-AE-7204): classroom wall poster of the planets of the solar system. Size, material and content confirmed on the quotation. Supplied by JaincoLab.
Note: Classroom poster of the solar system planets.
View Details
Solar System Model (SKU JA-AE-7206): simulation model of the solar system showing the size and relationship of the planets. Size and materials confirmed on the quotation. Supplied by JaincoLab.
Note: Solar system simulation model showing planet sizes and relationships.
View Details
Solar System Model Astronomy (SKU JA-AE-7207): solar system model with a calendar base for setting planet positions by date, not to scale, with teacher's notes on true sizes and distances and a lesson plan. Supplied by JaincoLab.
Note: Solar system model with a date calendar base, teacher's notes and lesson plan.
View Details
Sun Scale Kit (SKU JA-AE-7208): hardwood half-metre track, adjustable calibrated projection screen and instruction guide for measuring the Sun's diameter and distance and studying eclipses. Supplied by JaincoLab.
Note: Kit for measuring the Sun's diameter and distance with a track and projection screen.
View Details
Soap model kit (SKU JA-MS-7213): molecular model kit that builds a 3-D model of a soap molecule, the salt of a fatty acid; supplied in a case with compartments. Supplied by JaincoLab.
Note: Model kit for a 3-D model of a soap molecule, the salt of a fatty acid; the piece count is confirmed on the quotation.
View Details
Sodium Chloride model kit (SKU JA-MS-7214): molecular model kit that builds a 3-D ionic lattice model of sodium chloride (common salt), for teaching ionic bonding and crystal lattice structure. Supplied by JaincoLab.
Note: Model kit for a 3-D ionic lattice model of sodium chloride (common salt); the piece count is confirmed on the quotation.
View Details
Sodium Chloride Molecular Model Kit (SKU JA-MS-7217): molecular model kit that builds a larger-format 3-D ionic lattice model of sodium chloride; supplied in a case with compartments. Supplied by JaincoLab.
Note: Model kit for a larger-format 3-D ionic lattice model of sodium chloride; the piece count is confirmed on the quotation.
View Details
Sulfur Model Kit (SKU JA-MS-7218): molecular model kit that builds a 3-D model of the S8 sulfur ring molecule; supplied in a case with compartments. Supplied by JaincoLab.
Note: Model kit for a 3-D model of the S8 sulfur ring molecule; the piece count is confirmed on the quotation.
View Details
Solar Furnace (SKU JA-EE-7232): 305 mm diameter parabolic reflective dish with 24 cm focal length and copper receptacle for demonstrating concentrated solar energy. Supplied by JaincoLab.
Note: Parabolic solar furnace, 305 mm dish, with copper receiver.
View Details
Sunpower House (SKU JA-EE-7234): working passive solar house model, 275 x 275 x 200 mm, with teacher's guide on basic science, solar energy and energy conservation. Supplied by JaincoLab.
Note: Working passive solar house model with teacher's guide.
View Details
Semi Space Filling Model Set (SKU JA-MS-7243): molecular model kit that builds semi space-filling models that show the volume and shape of molecules. Supplied by JaincoLab.
Note: Model kit for semi space-filling models that show the volume and shape of molecules; the piece count is confirmed on the quotation.
View Details
Silicon Dioxide Diamond Structure Model (SKU JA-MS-7267): molecular model kit that builds a 3-D model of the diamond-type tetrahedral lattice adopted by silicon dioxide. Supplied by JaincoLab.
Note: Model kit for a 3-D model of the diamond-type tetrahedral lattice adopted by silicon dioxide; the piece count is confirmed on the quotation.
View Details
Press-to-read switch to read the accurate applied voltage to the GM tube. View Details

Solid Liquid Extraction Packed Bed Type (SKU JA-FMAHLE-7321): borosilicate glass column with SS mesh bed support, upward counter-current solvent flow, 30 L double-wall SS solvent tank in heated bath, PP magnetic pump, rotameter; 220 V, 1.5 kW.
Note: Packed-bed solid-liquid extraction set-up with glass column, heated 30 litre solvent tank and magnetic pump.
View Details
Spray Tower (SKU JA-FMAHLE-7322): liquid-liquid extraction set-up with borosilicate glass column (750 x 45 mm), top spray nozzle, 2 x 20 L SS feed tanks, 2 x 10 L extract and raffinate tanks, compressed-air feed, 2 rotameters.
Note: Glass spray tower for liquid-liquid extraction, operated semi-batch with compressed-air feed.
View Details
Sieve Plate Distillation Column (SKU JA-FMAHLE-7323): insulated SS column of 110 mm dia with 7 sieve trays, electric reboiler, SS shell-and-tube condenser, automatic reflux divider, PT-100 sensors, 5 L bottom and distillate tanks; 220 V, 6 kW.
Note: Seven-tray sieve plate distillation column with reboiler and automatic reflux divider for unit operations labs.
View Details
Static and Dynamic Balancing Apparatus (SKU JA-FMAHLE-7333): steel shaft in a rectangular frame with four clamped blocks, angular and longitudinal scales, cord-and-container weighing in steel balls, chain suspension and motor drive; 0.5 kW, 220 V.
Note: Balancing apparatus for statically and dynamically balancing a rotating mass system of four blocks on a motor-driven shaft.
View Details
Slip and Creep Measurement Apparatus (SKU JA-FMAHLE-7335): variable-speed motor driving equal-diameter pulleys by belt, sliding driven pulley for belt tension, brake drum on the output shaft and a double-channel digital speed indicator.
Note: Belt drive apparatus for measuring slip, creep, coefficient of friction and power transmitted at different belt tensions.
View Details
Single Cylinder Two Stroke Petrol Engine Test Rig (SKU JA-FMAHLE-7339) for measuring fuel intake and brake thermal efficiency in IC engine practicals. Engine rating, dynamometer and instrumentation are confirmed on the quotation.
Note: Two stroke petrol engine test rig for IC engine performance practicals; the detailed specification is confirmed on the quotation.
View Details
Single Cylinder Four Stroke Petrol Engine Test Rig (SKU JA-FMAHLE-7340): engine coupled to a rope brake dynamometer, with a stand-alone panel carrying air box, fuel tank, manometer and fuel measuring unit, for engine performance tests.
Note: Four stroke petrol engine test rig with rope brake loading and a panel for fuel and air measurement, for IC engine performance practicals.
View Details
Separating and Throttling Calorimeter (SKU JA-FMAHLE-7345): separating calorimeter with concentric chambers and perforated basket, throttling calorimeter with orifice, pressure gauge and thermometer, steam generator up to 2 kg/cm2 and heat exchanger.
Note: Combined separating and throttling calorimeter with its own steam generator, for finding the dryness fraction of steam.
View Details
Semi Automatic Microtome (SKU JA-M-7348), Lyzer: motorised drive, digital control panel, slice 0.25-60 microns, trimming 10-100 microns, 50 x 50 mm maximum section, 60 mm stroke, disposable blades, 220 V 50 Hz. Supplied by JaincoLab.
Note: Lyzer semi automatic microtome with motorised drive, slices 0.25-60 microns and trimming 10-100 microns.
View Details
Semi Automatic Mounting Press (SKU JA-ME-7354): hand-wheel metallographic hot mounting press with spring pressure, digital temperature controller and timer; 650 W 220 V heater, 0-400 ยฐC, moulds 22, 30 and 45 mm x 15 mm, about 25 kg. Supplied by JaincoLab.
Note: Semi-automatic hot mounting press for metallographic specimens, supplied by JaincoLab.
View Details
Short battery holder for four AA cells (SKU JA-EE-7356), from a range of AA and AAA holders in press-stud type (PP3 clip compatible) and tag type for your own wires or crocodile clips.
Note: Short format for four AA cells. Connection type confirmed on the quotation.
View Details
Stud battery holder for three AA cells (SKU JA-EE-7357), with press-stud terminals that take a standard PP3 battery clip, for quick battery connections in school circuits.
Note: Press-stud terminals take a PP3 battery clip. A tag-type 3 x AA holder is also listed.
View Details
Spectro Sample Polisher (SKU JA-ME-7358): polisher for spectrometer samples with 350 mm abrasive disc held by air suction, 2 HP 3-phase 415 V disc motor, 1 HP suction motor, cast iron disc housing, dust collection and DOL starter.
Note: Spectrometer sample polisher with 350 mm air-gripped abrasive disc and dust suction, 2 HP 3-phase motor.
View Details
Spectro Double Polisher Machine (SKU JA-ME-7360): spectrometer sample polisher with air-gripped alundum discs and locking system, 2 HP 2800 rpm 440/460 V 3-phase main motor, powder-coated thick MS body and 180 degree disc cover.
Note: Double spectrometer sample polisher with air-gripped alundum discs and 2 HP 3-phase motor.
View Details
Semi Automatic Polishing Machine (SKU JA-ME-7363): metallographic grinder-polisher with 250 mm wheel, independent polishing head, 50-600 rpm, 1-200 N single-pressure loading, LCD with digital timer, holder for 3 moulds. Supplied by JaincoLab.
Note: Semi-automatic metallographic grinding and polishing machine with independent polishing head, supplied by JaincoLab.
View Details
Single Disc Polishing Machine with Controller (SKU JA-ME-7364): table-top metallographic polisher with 8 in quick-change disc (10 in option), 1/2 HP high-torque DC motor, thyristor speed controller and digital speed indicator 50-1200 rpm.
Note: Table-top single disc metallographic polisher with thyristor-controlled speed of 50 to 1200 rpm.
View Details
Speed Regulated Polishing Machine (SKU JA-ME-7366): metallographic grinder-polisher with 230 mm disc, microcomputer speed control 100-1000 r/min with digital display, 400 W brushless motors and grinding head at 20-120 r/min. Supplied by JaincoLab.
Note: Microcomputer speed-regulated metallographic grinding and polishing machine, supplied by JaincoLab.
View Details
Stefan Boltzmann Apparatus (SKU JA-HTLE-7378): hemisphere on a bakelite plate heated by a hot-water jacket from an overhead tank, copper test disc at the centre and temperature sensors, for determining the Stefan-Boltzmann constant.
Note: Hemisphere and copper disc apparatus for determining the Stefan-Boltzmann constant.
View Details
Shell and Tube Heat Exchanger (SKU JA-HTLE-7380): two-pass teaching exchanger with SS shell, baffled copper tubes, rotameters, flow valves and a magnetic-drive pump from a heated tank with digital temperature controller; 220 V, 4 kW.
Note: Two-pass shell and tube heat exchanger trainer with SS shell, copper tubes and rotameters.
View Details
Stackable holders for D-size batteries, designed to link together in series or parallel to extend voltage or capacity in school circuit work. Supplied singly.
Note: For use with D batteries. The holders link together in series or parallel and are supplied singly.
View Details
Single contact key mounted on a base, with a plated spring arm and press knob, contact stud, plated connecting strip and 4 mm terminals, for momentary switching in physics circuits.
Note: Base-mounted single contact key with 4 mm terminals. Pressing the knob closes the circuit through the contact stud.
View Details
Single pole knife switch mounted on a plastic base, with brass poles and blade for good electrical connections, for on-off control in school and college electricity circuits.
Note: Mounted on a plastic base; poles and blade are brass for good electrical connections.
View Details
Sea Floor Spreading Activity Model (SKU JA-GE-7449): 600 x 350 mm model recreating 150 million years of sea-floor spreading and continental drift, with teacher's guide. Supplied by JaincoLab.
Note: Sea floor spreading model with teacher's guide, 600 x 350 mm.
View Details
Sedimentary Rock Collection (SKU JA-GE-7452): 15 representative sedimentary rock specimens of about 37 x 37 mm in a compartmented display container. Supplied by JaincoLab.
Note: 15 sedimentary rock specimens in a compartmented container.
View Details
Sieves (SKU JA-GE-7454): set of six sieves, mesh 4 mm, 2 mm, 2 x 0.5 mm, 0.25 mm and 0.1 mm, with bottom pan and lid, for separating and grading soil and rock samples. Supplied by JaincoLab.
Note: Set of six soil sieves, 4 mm to 0.1 mm, with pan and lid.
View Details
Slightly Radioactive Mineral and Substance (SKU JA-GE-7457): naturally slightly radioactive samples of granite, apatite, mica and zircon for teaching background radiation. Supplied by JaincoLab.
Note: Samples of granite, apatite, mica and zircon with slight natural radioactivity.
View Details
Soil Kit (SKU JA-GE-7458): pack of four soils - peat-loam, clay, sandy and calcareous - for comparing soil types. Supplied by JaincoLab.
Note: Pack of four soil types for class comparison.
View Details
Potentiometer wound on a tube with heavily oxidised resistance wire, with protective cover and 4 mm safety socket terminals; resistance within ยฑ10% of nominal.
Note: Resistance within ยฑ10% of the nominal value; the nominal value is confirmed on the quotation.
View Details
Stream Table Kit (SKU JA-WE-7506): basic stream table with plastic tray, drain trough, tray support and siphon tube, plus teacher's guide, for modelling river landforms. Supplied by JaincoLab.
Note: Basic stream table kit for modelling river erosion and landforms, with teacher's guide.
View Details
Sun Earth Moon System Whiteboard Science lesson (SKU JA-WSE-7527): interactive whiteboard lesson on Earth's motion, seasons, phases, eclipses, tides and gravity, with a Sun-Earth-Moon simulation. Supplied by JaincoLab.
Note: Interactive whiteboard lesson on the Sun-Earth-Moon system with a simulation.
View Details
Slide Set Basic Botany (SKU JA-PE-7530): 25 prepared glass microscope slides of algae, fungi, mosses, liverworts, ferns, Pinus and flowering plants, including onion root tip mitosis.
Note: Set of 25 prepared basic botany slides, made by JaincoLab.
View Details
Low-voltage DC motor mounted on a base with a series resistor to limit current consumption, for energy transfer and circuit experiments in school science.
Note: Motor on base with a current-limiting series resistor. The operating voltage is confirmed on the quotation.
View Details
Solar Cell Unit (JA-EE-7556): a solar panel housed in a plastic box on a base with 4 mm socket terminals, supplied with a low-consumption motor with fan, a buzzer and an LED for practical solar energy work by students.
Note: Solar panel in a plastic box on a base with 4 mm output sockets, supplied with a low-consumption motor and fan, a buzzer and an LED as loads.
View Details
Sachs Water Culture Mineral Deficiency (SKU JC-PE-7581): 8 tubes of plant culture medium, one complete and seven each lacking P, Fe, N, S, Ca, Mg or K; each makes 4 litres. Supplied by JaincoLab.
Note: Sachs mineral deficiency water culture set of 8 tubes, supplied by JaincoLab.
View Details
Soil Less Garden (SKU JC-PE-7582): hydroponics investigation comparing seedlings grown without soil and in soil, for lessons on plant nutrition. Contents confirmed on the quotation.
Note: Hydroponics investigation kit comparing seedling growth with and without soil, supplied by JaincoLab.
View Details
Sample Teaching Tank 12 Inch (SKU JC-PE-7585): sampler kit with the large 12-inch observation tank, a 20-page Discovery Book Sampler with 8 lessons and a teacher's insert. Supplied by JaincoLab.
Note: 12-inch teaching tank sampler kit with 8-lesson book, supplied by JaincoLab.
View Details
Starter Kit Teaching Tank (SKU JC-PE-7588): starter kit with a large 12 x 12 inch observation tank and the Discovery Book Vol. 1 of 50 lessons adjustable to different levels. Supplied by JaincoLab.
Note: 12 x 12 inch teaching tank starter kit with 50-lesson book, supplied by JaincoLab.
View Details
Set of Plates Microwave Accessories (JA-SW-7610): 2 aluminium plates 200 x 280 mm, polarization grille 200 x 200 mm, perspex plate 200 x 280 mm and aluminium plate 60 x 280 mm (approx.), all with supporting feet.
Note: Five microwave plates on supporting feet: two aluminium, one narrow aluminium, one perspex and one polarization grille.
View Details
Signal Generator and Amplifier (JA-SW-7646): sine, square and triangular waves 0.1 Hz to 100 kHz in six ranges, 0-10 V p-p, 4 W 4 ohm output to drive a loudspeaker, 600 ohm attenuated output and amplifier mode with gain 0-100.
Note: Signal generator (0.1 Hz to 100 kHz, 4 W into 4 ohm) with amplifier mode (gain 0 to 100); 220-240 V AC.
View Details
Simple Pattern Sonometer (JA-SW-7655): wooden resonance box 1140 x 125 x 100 mm with two 50 N spring balances, two wrest pins, two 30 SWG steel wires 1 m long and three bridges (one large, two small).
Note: Two-wire sonometer on a 1140 mm wooden resonance box with two 50 N spring balances and three bridges.
View Details
Sound Energy Kit (JA-SW-7657): student kit for investigating the physics behind sound energy, with activities on sound wave theory, reflection of sound, force of sound waves and transmission; Teacher's Guide included.
Note: Student sound energy investigation kit with Teacher's Guide.
View Details
Sound Spectrum Chart (JA-SW-7659): classroom chart explaining the ingredients of sound, including pitch, tone and pressure, with an 11 x 17 activity guide of experiment ideas for middle school science.
Note: Classroom chart on pitch, tone and pressure of sound, with an 11 x 17 activity guide.
View DetailsSpeed of Sound Kit (JA-SW-7661): direct measurement of the time for sound to travel a known distance, with microphones starting and stopping a Fast Timer of microsecond accuracy; small hammer and metal plate included.
Note: Direct speed-of-sound kit with microphones, microsecond Fast Timer, hammer and metal plate.
View Details
Steel Tuning Fork Boxed Set of 8 (JA-SW-7681): boxed set of steel plain shank tuning forks, one each of C 256, D 288, E 320, F 341, G 384, A 426, B 480 and C 512 Hz, frequency marked on each fork.
Note: Boxed set of 8 steel tuning forks, C 256 to C 512 Hz, frequency marked.
View Details
Shaft line unit (JA-ETE-7714): a 6 mm steel shaft with a 56 mm diameter aluminium 'V' pulley at one end and a coupling at the other for linking to adjacent units, transmitting rotation through the energy transfer system.
Note: 6 mm steel shaft with a 56 mm aluminium 'V' pulley and an end coupling, used to pass mechanical rotation between units of the energy transfer range.
View Details
Small motor generator (JA-ETE-7718) on a 165 x 100 mm base with 4 mm socket terminals, used with the large motor/generator to compare power input and output by driving each with the other and metering voltage and current.
Note: Motor/generator on a 165 x 100 mm base with 4 mm sockets, paired with the large unit for power input and output comparisons.
View Details
Spring unit (JA-ETE-7721): a steel shaft carrying a clock spring with a free-wheel device, winding ratchet and 56 mm diameter aluminium 'V' pulley, for storing and releasing elastic potential energy in the energy transfer system.
Note: Clock spring on a steel shaft with free-wheel device, winding ratchet and 56 mm aluminium 'V' pulley, for elastic potential energy demonstrations.
View Details
Small Bucket and Cylinder (JA-FMDE-7731): simple brass bucket and cylinder, 50 mm, overall 115 mm, with suspension hook and loop, for class demonstration or individual Archimedes' principle work.
Note: Small brass bucket and cylinder, 50 mm, overall 115 mm, for Archimedes' principle.
View Details
Second law of motion apparatus: 25 cm unit on a metal casting with visible mechanism, spring gun with two tensions, two steel balls and a 10 mm rod for clamping horizontally to a stand or table clamp.
Note: Clamp-mounted spring gun with two tensions and two steel balls. Stands and quantities are confirmed on the quotation.
View Details
Student digital joulemeter: 10 A AC/DC maximum load, 0-15 V AC or 0-21 V DC input, built-in timer started and stopped with the load, microprocessor circuitry, 2 x 16 character LCD, 90 x 90 x 33 mm.
Note: Digital joulemeter with built-in timer for student heating and power experiments. Supplies and leads are confirmed on the quotation.
View Details
Single pulley with one 50 mm diameter wheel mounted in a metal frame with two hooks, for fixed and movable pulley practicals in simple machines lessons.
Note: Single 50 mm pulley in a metal frame with two hooks. Quantities are confirmed on the quotation.
View Details
Single phase joulemeter (SKU JA-M-7876): a single phase energy meter on a support in a transparent case, supplied with bulb holder and power cord, so students can watch the meter work in electrical energy lessons.
Note: Single phase energy meter mounted in a transparent case, supplied with a bulb holder and power cord for classroom demonstration.
View Details
Smoothed power supply (SKU JA-M-7895): 2-12 V AC/DC output with DC specially smoothed for electronics applications, 230 V AC 50 Hz input, for school and college electronics and electricity practicals.
Note: Low-voltage 2-12 V AC/DC supply with smoothed DC for electronics, 230 V 50 Hz input.
View Details
Spherometer (SKU JA-M-7905): brass instrument with a 10-0-10 mm vertical scale and a 100-division micrometre scale, for measuring the radius of curvature of spherical lenses in school and college physics practicals.
Note: Brass spherometer with 10-0-10 mm vertical scale and 100-division micrometre scale.
View Details
Single range voltmeter (SKU JA-M-7920): moving coil, DC only, in ranges from 0-1 V to 0-50 V, 60 mm scale, 4 mm socket terminals, 125 x 80 x 80 mm, for student electricity practicals.
Note: Moving coil DC voltmeter with one range, listed from 0-1 V to 0-50 V, 60 mm scale and 4 mm sockets.
View Details
Stefan Constant Kit (SKU JA-PLE-7961): two black copper radiation plates with heater, three thermometers, built-in power supply, AC voltmeter and ammeter; a self-contained set for determining Stefan's constant in physics practicals.
Note: Self-contained: no additional equipment is needed.
View Details
Semiconductor laser (SKU JA-LOE-7977): red 630-640 nm beam at 0.9 mW, Class II, about 1 mrad divergence, internal 1 MHz pulse modulation and 3.5 mm external modulation socket, for speed of light and diffraction experiments.
Note: Class II laser with both internal pulse modulation and an external modulation input.
View Details
Simple optical bench (SKU JA-LOE-7979) with opaque screen, lens holder with biconvex lenses, one metre rule and lamp housing with 2 AA alkaline batteries, for convex lens and focal length experiments in school physics.
Note: Battery-operated lamp housing; 2 AA alkaline batteries are included.
View Details
Sodium Spectral Lamp (SKU JA-LOE-7980): Osram sodium spectral lamp for a current-limited 220 V AC supply (choke or resistor), supplied with a specification sheet that includes power supply design suggestions. Supplied by JaincoLab.
Note: Osram-brand lamp supplied by JaincoLab; its condition, new or lightly used, is confirmed on the quotation.
View Details
Compact spectral lamp with holder and power supply (SKU JA-LOE-7981): lamp in a black protective tube on top of the power unit, rotating sleeve with shaped apertures and bright, intense output for spectrometer and optical work.
Note: State the type of spectral lamp required when ordering.
View Details
Student spectrometer (SKU JA-LOE-7982): economical instrument with heavy base and 170 mm circle divided into 360 degrees, rotating independently with a locking screw, for spectra, angle of prism and refractive index experiments.
Note: Prisms, gratings and spectral lamps are quoted separately.
View Details
Spectroscope set (SKU JA-LOE-7983) with a 1 inch diameter diffraction grating spectroscope that lets students view the spectrum of sunlight, for school lessons on light and colour.
Note: The number of spectroscopes per set is confirmed on the quotation.
View Details
Spectroscope kit (SKU JA-LOE-7984) based on a 1 inch diameter diffraction grating spectroscope, for students to observe the prismatic colours of sunlight in school light and colour lessons.
Note: Kit contents are confirmed on the quotation.
View Details
Spectrum tube (SKU JA-LOE-7986), straight 260 mm with 50 mm fine capillary, in carbon dioxide, helium, hydrogen, iodine, krypton, neon, nitrogen, oxygen, sulphur or xenon, for emission spectra with a spectrum tube power supply.
Note: State the filling required; use with the Spectrum Tube Holder with Power Supply.
View Details
Spectrum tube power supply (SKU JA-LOE-7987) for 220 V AC, 50 Hz, suitable for 20/26 cm tubes, with a box that holds the tube firmly and shields the electrodes and a black back panel, for emission spectra work.
Note: Spectrum tubes are ordered separately.
View Details
Simple Boyle's law apparatus (JA-H-7992): a sealed syringe mounted on wooden platforms. Loading it with different masses compresses the air inside, and the change in volume is read from the syringe scale.
Note: Economical Boyle's law demonstration: sealed syringe on wooden platforms, loaded with masses, with volume read from the syringe scale.
View Details
Steam generator with handle (JA-H-8019): copper, 280 x 115 mm, capacity 1.5 L, with a 23 mm diameter neck, side tube and water gauge, for supplying steam in heat experiments.
Note: Copper steam generator, 1.5 L, 280 x 115 mm, with handle, 23 mm neck, side tube and water gauge.
View Details
Self and mutual inductance coils: standard model with a 3000-turn primary and secondaries of 1000, 2000 and 3000 turns; smaller versions with a 500-turn primary on wooden bobbins are also listed.
Note: Self and mutual inductance coils, 3000-turn primary with 1000, 2000 and 3000-turn secondaries.
View Details
Spare pencil jockey for Wheatstone bridge and potentiometer experiments, supplied by JaincoLab: large, easy-to-handle Bakelite moulded handle, brass plated contact, locating notch and heavy lock-type brass plated terminal; lead not included.
Note: Spare pencil jockey with Bakelite handle, brass plated contact and lock-type terminal; supplied without lead.
View Details
Spare lead for connecting a pencil jockey to a potentiometer or Wheatstone bridge: heavy wire, 1.5 m long, with U-shape brass clips at both ends.
Note: Heavy wire lead, 1.5 m, with U-shape brass clips at both ends, for pencil jockeys.
View Details
Self inductance bridge, also usable as a Wheatstone bridge: ratio arm of two dials (1, 10, 100, 1000 ohm), resistance arm of three decade dials (0.1, 1, 10), slide wire in 170 parts, 0.17 ohm series slide resistance, double key.
Note: Self inductance bridge with ratio and resistance dials, 170-division slide wire and double key; also a Wheatstone bridge.
View Details
Special water bath with a brass reservoir that holds a 100 ml borosilicate glass beaker (supplied); used to provide hot water, mustard oil or silicone oil for experiments with electrical and electronic instruments.
Note: Special water bath with brass reservoir and 100 ml borosilicate beaker, for electrical experiments.
View Details
Steam boiler of 2 to 3 litre capacity fitted with a heating element, for use with the Callendar and Griffiths bridge.
Note: Steam boiler, 2-3 litre, with heating element, for use with the Callendar and Griffiths bridge.
View Details
Series Monocular Microscope: 45-degree monocular head, locked-on WF10x with calibrated pointer, achromatic DIN 4x, 10x, 40xR, 100xR oil objectives (40x-1000x), coaxial focus, 12.5 x 11.5 cm mechanical stage, 1.25 NA Abbe, LED.
Note: Monocular laboratory microscope with DIN objectives up to 100x oil, a built-in mechanical stage and LED lighting.
View Details
Anderson bridge for self inductance: 1 kHz sine source with amplitude lamp, built-in digital null detector, R1 three-decade (x1, x10, x100 ohm), M three-decade (x10, x100, x1000 ohm), C decade x0.01 mfd, R2-R4 fixed 1 k ohm, four unknowns.
Note: Anderson bridge with 1 kHz source, digital null detector, decade dials and four unknown inductances.
View Details
Schering bridge: 1 kHz sine source with amplitude lamp, built-in digital null detector, R1 and R2 ratio dials (1-1000 ohm), R decade x1 ohm, C1 two-decade (x0.001 and x0.01 mfd), C2 fixed 0.001 mfd, five switched unknowns.
Note: Schering bridge with 1 kHz source, digital null detector, capacitance decades and five switched unknowns.
View Details
Series Binocular Stereo Microscope: 45-degree binocular head on a post (rotates 180 degrees), IPD 51-75 mm, lockable WF10x pair, one achromatic 1x, 2x, 3x or 4x objective for 10x-40x, 95 mm black/white plate; no built-in light.
Note: Compact binocular stereo microscope for middle and secondary classes, in 10x, 20x, 30x or 40x versions without built-in lighting.
View Details
Standard cell housed in a small steel cabinet, giving an e.m.f. of 1.0816 volts, accurate between 10 C and 40 C; a stable voltage reference for standardising potentiometers and instruments.
Note: Standard cell in a steel cabinet, 1.0816 V e.m.f., accurate from 10 C to 40 C.
View Details
Solid-state regulated power supply, variable from 0 to 5 V at 1 A, designed as the driving supply for potentiometer experiments; supplied with leads.
Note: Solid-state regulated supply, 0-5 V variable at 1 A, for potentiometer experiments, with leads.
View Details
Super Widefield Digital Zoom Stereo Microscope: 0.66x-5x zoom (1:7.6) for 6.6x-50x, 110 mm working distance, WF10x/23 pair, built-in 5.0 MP USB 2.0 camera, independently dimmable 3 W LED top and bottom lights.
Note: Zoom stereo microscope with a built-in 5.0 MP USB camera and a 110 mm working distance; auxiliary objectives extend the range from 3.3x to 200x.
View Details
Super Widefield Digital Trinocular Zoom Stereo Microscope (SKU JA-M-8127): trinocular head 20/80 split, zoom 0.66x-5x (1:7.6), 6.6x-50x standard, 110 mm working distance, WF10x/23 mm eyepieces, 140 mm focus range, dimmable top and bottom LED.
Note: Trinocular zoom stereo microscope, 6.6x to 50x, with 110 mm working distance and a camera port, supplied by JaincoLab.
View Details
Stand Alone LCD Screen Digital Microscope: 3.5 in LCD, 5 MP sensor, 10x-300x (up to 500x digital), manual focus 10-50 mm, 8 dimmable LEDs, microSD up to 32 GB, TV output, 1050 mAh Li-ion battery for 2.5-3 hours.
Note: Battery-powered digital microscope with its own 3.5 in screen, for sharing observations in class without a computer.
View Details
Small Organisms Prepared Slide set (SKU JC-PS-8156): 15 labelled glass slides of insect parts, freshwater invertebrates and protists in a slotted plastic case. Supplied by JaincoLab.
Note: Fifteen labelled glass slides of insects, small invertebrates and protists in a slotted plastic case.
View Details
Shaking water bath with a 12 L seamless stainless steel chamber, ambient +5 to 80ยฐC, 30 to 200 rpm on a 25 mm orbit, universal spring platform for 15/50 ml tubes, flasks and bottles up to 1 L, hinged removable lid.
Note: Shaking water bath, 12 L, ambient +5 to 80ยฐC, 30-200 rpm, 25 mm orbit, 115 or 230 V.
View Details
Mini centrifuge for PCR strips: rotor holds 4 x 12-position or 4 x 8-position strips or 48 x 0.2 ml tubes, fixed 5,500 rpm (2,000 xg) on lid closing, quick stop on opening, 14 x 20 x 11.2 cm, 1 kg, 100-240 V.
Note: PCR strip mini centrifuge, 4 x 12-position strips or 48 x 0.2 ml tubes, 5,500 rpm / 2,000 xg.
View Details
Single-beam visible spectrophotometer, 400 to 1000 nm, 15 nm bandwidth, 1200 lines/mm grating, +/-2 nm accuracy, graphic LCD in absorbance and transmittance, USB and RS232, supplied with tube holder, cuvette adapter and 12 glass cuvettes.
Note: Visible spectrophotometer, 400-1000 nm, single beam, USB/RS232, 90-240 V.
View Details
Single-beam spectrophotometer, 335 to 1000 nm, 10 nm slit, 1200 lines/mm grating, silicon photodiode, auto zero and one-touch blank, graphic LCD in absorbance, transmittance, factor and concentration, USB and RS232.
Note: Spectrophotometer 335-1000 nm, single beam, 10 nm slit, concentration mode, 90-240 V.
View Details
Single-beam spectrophotometer, 325 to 1000 nm, 5 nm bandwidth, four-position 10 mm square cuvette holder, silicon photodiode and 1200 lines/mm grating, graphic LCD in absorbance, transmittance, factor and concentration, USB and RS232.
Note: Spectrophotometer 325-1000 nm with four-position 10 mm cuvette holder, 5 nm bandwidth.
View Details
Single-beam spectrophotometer, 325 to 1100 nm, 4 nm bandwidth, Littrow grating 1200 lines/mm, four-position 10 mm cell holder, compartment for 5 to 100 mm path cells, +/-1.0 nm accuracy, LCD with absorbance, transmittance, factor and concentration, USB.
Note: Single-beam spectrophotometer 325-1100 nm, 4 nm bandwidth, tungsten lamp, USB.
View Details
Single-beam UV-Vis spectrophotometer, 190 to 1100 nm, 4 nm bandwidth, tungsten and deuterium lamps (pre-aligned), four-position 10 mm cell holder, cells to 100 mm path, +/-0.8 nm accuracy, stray light 0.05 %T or less, USB.
Note: Single-beam UV-Vis spectrophotometer 190-1100 nm with tungsten and deuterium lamps.
View Details
Spectrophotometer (JA-LE-8258) for 190-1100 nm with a four-position 10 mm cell holder, 2 nm bandwidth, tungsten and deuterium lamps and a 9.7 inch touchscreen with USB, Wi-Fi and Bluetooth. Supplied by JaincoLab.
Note: UV-visible spectrophotometer, 190-1100 nm, with a four-position cell holder. Optical configuration is confirmed on the quotation.
View Details
Skull With Blood Vessels (SKU JA-AM-8274): life-size PVC skull with articulated removable mandible and removable skullcap showing painted blood vessels and arteries between skull and brain, supplied by JaincoLab.
Note: Life-size PVC skull with painted blood vessels under a removable skullcap, supplied by JaincoLab. For teaching use only.
View Details
Small Teeth Model with Brush (SKU JA-DM-8311): demonstration model of the upper and lower adult dentition with a flexible jaw joint and a brush, for teaching brushing; exact size is confirmed on the quotation.
Note: Teeth model with brush, smaller version, supplied by JaincoLab. For teaching use only.
View Details
Spermatogenesis Model (SKU JA-AM-8332): PVC model magnified 10,000x showing the stages from spermatid to mature spermatozoon, mounted on a stand, supplied by JaincoLab.
Note: Spermatogenesis model magnified 10,000x on a stand, supplied by JaincoLab. For teaching use only.
View Details
Skin Model (SKU JA-AM-8347): three-dimensional human skin enlarged 70x with hair follicles, sweat and sebaceous glands, receptors, vessels, nerves and erector muscles numbered on a key card, on a 10.5 x 7.5 in board.
Note: Human skin enlarged 70x on a 10.5 x 7.5 inch board with a key card, supplied by JaincoLab. For teaching use only.
View Details
Shoulder Joint Model (SKU JA-AM-8371): life-size PVC shoulder with portions of the clavicle, humerus and shoulder blade and the glenohumeral and other ligaments, supplied by JaincoLab.
Note: Life-size PVC shoulder joint with ligaments, supplied by JaincoLab. For teaching use only.
View Details
Solar energy kit (JA-EK-8470) used to build small boats or model cars powered by a fan that spins when the solar panel is in direct sunlight; a hands-on introduction to converting light energy into motion.
Note: Kit for building small solar-powered boats or model cars driven by a fan from a solar panel in direct sunlight; parts are itemised on the quotation.
View Details
Soil test kit (JA-EK-8481) for testing pH, phosphorus, nitrate, nitrogen, ammonia nitrogen, potassium and calcium, packed in a neatly organised case, for classroom environmental and agricultural-science investigations.
Note: Soil test kit covering pH, phosphorus, nitrate, nitrogen, ammonia nitrogen, potassium and calcium, in an organised case.
View Details
Safety Ruler (SKU JA-GLE-8571): 300 mm stainless steel cutting ruler with a curved profile that keeps fingers well away from the blade while cutting in technology class.
Note: 300 mm stainless steel safety ruler, curved profile.
View Details
Sharp Tip Forceps (SKU JA-GLE-8574): stainless steel forceps with a sharp tip and narrow flutes, without guide pin, for picking up very small objects or larger items that will not puncture easily.
Note: Stainless steel sharp tip forceps, narrow flutes.
View Details
Sharp Tip Scissors (SKU JA-GLE-8576): straight stainless steel dissecting scissors with sharp-tipped, fine-point blades and closed shanks; easy to use and clean.
Note: Straight stainless steel dissecting scissors, fine point.
View Details
Single Battery Holder (SKU JA-GLE-8578): snap-in holder for 1 AA cell, fitted with connecting wires, so batteries can be used in circuits without connecting tape. Supplied by JaincoLab.
Note: Holder for one AA cell with connecting wires.
View Details
Slinky Spring Bucket (SKU JA-GLE-8580): 75 mm tempered steel wire spring (waveform helix) with bucket, stickers and an activity booklet of 4 science activity ideas. Supplied by JaincoLab.
Note: 75 mm steel spring with bucket, stickers and activity booklet.
View Details
Solid Rubber Stopper (SKU JA-GLE-8582): solid rubber stoppers in five sizes, from 12.7 x 18.2 x 26.5 mm to 28 x 32.9 x 29.6 mm (bottom x top x length). Supplied by JaincoLab.
Note: Solid rubber stoppers in five listed sizes.
View Details
Specialised Gear Pack (SKU JA-GLE-8585): 10 bevel, 10 worm, 10 crown and 10 rack gears for teaching gear concepts and building working models. Supplied by JaincoLab.
Note: 10 each of bevel, worm, crown and rack gears.
View Details
Strip and Gusset Pack (SKU JA-GLE-8591): pre-drilled strips (40, each 500 x 10 mm) and 60 gussets in small, medium and large with 45, 60 and 90 degree angles, for technology projects on structures. Supplied by JaincoLab.
Note: 40 pre-drilled strips and 60 gussets for structures.
View Details
The spindle moulder machine shapes mouldings, rebates and profiles on timber in joinery training.
Note: The spindle moulder machine shapes mouldings, rebates and profiles on timber in joinery training.
View Details
The sliding panel saw machine cuts large boards and panels to size, with a listed cut length of 3150 mm.
Note: The sliding panel saw machine cuts large boards and panels to size, with a listed cut length of 3150 mm.
View Details
The shielded metal arc welding machine is a three-phase stick welder for manual metal arc welding practice in fabrication and vocational workshops.
Note: The shielded metal arc welding machine is a three-phase stick welder for manual metal arc welding practice in fabrication and vocational workshops.
View Details
The safety helmet is a hard hat for workshop, construction and engineering work, made in PVC, ABS or HDPE with either a PVC or a ratchet inner fitting.
Note: The safety helmet is a hard hat for workshop, construction and engineering work, made in PVC, ABS or HDPE with either a PVC or a ratchet inner fitting.
View Details
Sampling Tray (SKU JA-MI-8765): trays for holding samples during oven heating, listed in twelve sizes from 254 x 254 x 38 mm to 1040 x 1040 x 76 mm, for soil, aggregate, food and materials testing; material confirmed on the quotation.
Note: Oven sampling trays in twelve sizes from 254 x 254 x 38 mm to 1040 x 1040 x 76 mm.
View Details
Specific Gravity Bottle (SKU JA-MI-8776): spherical-pattern borosilicate glass bottle with borosilicate stopper, volume adjusted at 27ยฐC to the etched value, in 25, 50, 100 and 250 ml capacities, for density measurement.
Note: Spherical borosilicate specific gravity bottle, adjusted at 27ยฐC, 25 to 250 ml.
View Details
This saw is a bench masonry cutting saw for bricks, blocks, rocks, tiles and slabs in building construction training.
Note: This saw is a bench masonry cutting saw for bricks, blocks, rocks, tiles and slabs in building construction training.
View Details
The site dumper is an articulated four-wheel-drive dumper for moving concrete, soil and materials on construction training sites.
Note: The site dumper is an articulated four-wheel-drive dumper for moving concrete, soil and materials on construction training sites.
View Details
The scaffold platform is a multi-purpose access unit that works in five modes: extension ladder, step ladder, work platform, stairway ladder or two single ladders.
Note: The scaffold platform is a multi-purpose access unit that works in five modes: extension ladder, step ladder, work platform, stairway ladder or two single ladders.
View Details
The strap wrench grips pipes and round parts with a belt strap instead of jaws, giving extra leverage when fastening or loosening.
Note: The strap wrench grips pipes and round parts with a belt strap instead of jaws, giving extra leverage when fastening or loosening.
View Details
The slip roller machine forms sheet metal into curves and cylinders in sheet-metal and duct training.
Note: The slip roller machine forms sheet metal into curves and cylinders in sheet-metal and duct training.
View Details
The surface dust chip remover machine cleans the surfaces of boards and workpieces with double nylon brushes and a suction fan as they pass on a conveyor.
Note: The surface dust chip remover machine cleans the surfaces of boards and workpieces with double nylon brushes and a suction fan as they pass on a conveyor.
View Details
The shaper machine is a 12-inch metal shaper for machining flat surfaces, slots and keyways in machine shop training.
Note: The shaper machine is a 12-inch metal shaper for machining flat surfaces, slots and keyways in machine shop training.
View Details
Survey compass (SKU JA-SE-8839): aluminium or brass, circle graduated to 30 minutes, 100, 125 or 150 mm diameter, complete in fibre case with aluminium telescopic, rigid or wooden tripod.
Note: Survey compass with tripod in 100-150 mm sizes, made by JaincoLab.
View Details
Survey chain (SKU JA-SE-8840): 66 foot measuring chain (one chain; 80 chains to the mile, 4 rods to the chain) for distance measurement, retracing old survey lines and teaching traditional units.
Note: 66 ft survey chain for measurement and retracing survey lines, supplied by JaincoLab.
View Details
Survey umbrella (SKU JA-SE-8844): 2 m diameter sturdy fabric canopy on 8 segments with 4 mm ribs, 25 mm pole, supplied with 3 guide ropes and pegs, for shading instruments from sun and rain.
Note: 2 m survey umbrella with guide ropes and pegs, made by JaincoLab.
View Details
Sample splitters, also called riffle boxes, divide a sample of aggregate, sand, gravel or similar material into two representative portions. They are supplied with two collecting pans and are made in painted steel or stainless steel (SKU JA-CL-8855).
Note: Sample splitters, also called riffle boxes, divide a sample of aggregate, sand, gravel or similar material into two representative portions.
View Details
The shrinkage limit set is used to determine the shrinkage limit of soil and to calculate related factors such as shrinkage ratio, shrinkage index and volumetric shrinkage.
Note: The shrinkage limit set is used to determine the shrinkage limit of soil and to calculate related factors such as shrinkage ratio, shrinkage index and volumetric shrinkage.
View Details
The soil volume change meter gives a potential volume change (PVC) rating for a soil from a small specimen compacted in a 70 mm diameter ring, with the readings taken on a 4.5 kN (1,000 lb) proving ring and dial indicator.
Note: The soil volume change meter gives a potential volume change (PVC) rating for a soil from a small specimen compacted in a 70 mm diameter ring, with the readings taken on a 4.5 kN (1,000 lb) proving ring and dial indicator.
View Details
The soil permeability apparatus measures the permeability of compacted soil samples in a 1000 ml gun metal mould of 100 mm internal diameter and 127 mm height.
Note: The soil permeability apparatus measures the permeability of compacted soil samples in a 1000 ml gun metal mould of 100 mm internal diameter and 127 mm height.
View Details
The sand gauge chart is a water-resistant 89 x 64 mm (3.5 x 2.5 inch) plastic card with nine granule patches for judging the size and roundness of sand grains, from 2 mm very coarse sand down to 1/16 mm silt.
Note: The sand gauge chart is a water-resistant 89 x 64 mm (3.5 x 2.5 inch) plastic card with nine granule patches for judging the size and roundness of sand grains, from 2 mm very coarse sand down to 1/16 mm silt.
View Details
The sand replacement equipment determines the dry density of compact fine and medium-grained soils, in layers not exceeding 50 cm thickness.
Note: The sand replacement equipment determines the dry density of compact fine and medium-grained soils, in layers not exceeding 50 cm thickness.
View Details
Shrinkage Bar Mould (SKU JA-M-8898): mild steel mould with accurately machined faces, base plate and four stainless steel reference pins, for casting cement-aggregate specimens to measure potential expansive alkali reactivity.
Note: Mild steel bar mould with base plate and four stainless steel reference pins; bar size confirmed on the quotation.
View Details
Standard Spatula (SKU JA-M-8900): steel blade of a specified shape with a wooden handle, maximum weight 340 g, used in standard materials-testing procedures such as mixing and gauging cement paste and mortar.
Note: Steel-bladed spatula with wooden handle, maximum weight 340 g; blade dimensions confirmed on the quotation.
View Details
Spring Testing Machine (SKU JA-SOMLE-8906): 500 kg / 5000 N capacity for tension and compression springs; 300 mm tension spring length, 200 mm compression spring dia, 500 mm crosshead travel, 1 N resolution.
Note: Hydraulic spring testing machine, 500 kg capacity, for spring load-deflection tests; supplied by JaincoLab.
View Details
Surface Analysis System (SKU JA-SOMLE-8934): 60+ roughness and waviness parameters, 100 mm traverse at 2.5/0.25 mm/s, breakaway probe with 3 stylus tips, 2 mN force, +/-12.5 to +/-500 micron ranges, PC software.
Note: Stylus surface roughness and waviness measuring system with PC software; supplied by JaincoLab.
View Details
Spin Train (SKU JA-CTM-9036): CNC turning trainer with 200 mm swing, 170 mm turning length, 300 mm between centres, 100 mm turning diameter, 8-station turret, coolant and lubrication systems; options include ATC and CAD/CAM software.
Note: CNC turning trainer that teaches both machine operation and the production of precision components; supplied by JaincoLab.
View Details
Smart Mill 500 (SKU JA-CTM-9040): compact vertical machining centre with box-structured base and column, 8,000 rpm spindle with coolant through spindle, 20-tool double gripper ATC, side chip conveyor with coolant system, rigid tapping.
Note: Compact vertical machining centre for production-style milling training; supplied by JaincoLab.
View Details
Smart Mill 600 (SKU JA-CTM-9041): vertical machining centre with 8,000 rpm spindle and coolant through spindle, 20-tool double gripper ATC, AC digital spindle and servo drives, LM guideways on X, Y and Z, programmable lubrication.
Note: Vertical machining centre with 20-tool ATC and linear guideways for production-style milling training; supplied by JaincoLab.
View Details
Spinner 15 (SKU JA-CTM-9046): rigid CNC turning centre for medium-diameter components with AC digital spindle and servo drives, LM guideways on X and Z, 8-station bi-directional turret, coolant and programmable lubrication.
Note: CNC turning centre for medium-diameter components, for advanced turning practice; supplied by JaincoLab.
View Details
Spot Welding Machine (SKU JA-CLE-9048): floor type foot operated resistance spot welder, min. 15 kVA, 220/380 V 3 phase, water cooled, min. 16 in throat, 8 in arm gap; MS, galvanised and SS sheet 1.5 + 1.5 mm.
Note: Floor type 15 kVA spot welding machine with water cooling; supplied by JaincoLab.
View Details
Spinner 18 (SKU JA-CTM-9050): CNC turning centre with big-bore spindle for larger jobs through the bore, high torque, AC digital spindle and servo drives, LM guideways on X and Z, 8-station bi-directional turret, coolant and programmable lubrication.
Note: Big-bore CNC turning centre for medium-diameter components, for advanced turning practice; supplied by JaincoLab.
View Details
Spinner 18DX (SKU JA-CTM-9051): CNC turning centre with power-operated chuck and hydraulic cylinder, hydraulic power pack, AC digital spindle and servo drives, 8-station bi-directional turret, coolant, programmable lubrication and service toolkit.
Note: CNC turning centre with hydraulic power chuck, for advanced turning training and light production; supplied by JaincoLab.
View Details
Spinner 22 (SKU JA-CTM-9053): heavy duty slant saddle CNC turning centre for medium weight jobs, AC digital spindle and servo drives, linear guideways on X and Z, 8-station bi-directional turret, 4 boring bar holders, coolant and lubrication.
Note: Heavy duty slant saddle CNC turning centre for medium weight jobs; supplied by JaincoLab.
View Details
Spinner 25 (SKU JA-CTM-9055): heavy duty slant-bed CNC turning centre with four guideways for heavier jobs, AC digital spindle and servo drives, linear guideways on X and Z, 8-station bi-directional turret, 4 boring bar holders.
Note: Heavy duty slant-bed CNC turning centre with four guideways for heavier jobs; supplied by JaincoLab.
View Details
Single Ended Scriber (SKU JA-CLE-9065): marking-out scriber about 180 mm long for scribing layout lines on metal in fitting, sheet-metal and machining workshops.
Note: Single ended marking-out scriber, about 180 mm long; supplied by JaincoLab.
View Details
Steel Rule (SKU JA-CLE-9066): 300 mm stainless steel rule, non-rusting, calibrated in metric and inches, for measuring and marking out in engineering workshops and technology rooms.
Note: 300 mm non-rusting stainless steel rule with metric and inch graduations; supplied by JaincoLab.
View Details
Screw Drivers (SKU JA-CLE-9087): set of 4 chrome vanadium steel screwdrivers with hammer-proof plastic handles, 3 x 70, 4 x 90, 6 x 130 and 8 x 170 mm, for workshop assembly and maintenance.
Note: Set of four chrome vanadium screwdrivers with hammer-proof plastic handles; supplied by JaincoLab.
View Details
Soldering Iron (SKU JA-CLE-9091): non-electric copper soldering iron with straight diamond tip and wooden handle, about 450 g, for soft soldering in sheet-metal workshops.
Note: Non-electric copper soldering iron, straight diamond tip, wooden handle, about 450 g; supplied by JaincoLab.
View Details
Spur Gear Set (SKU JA-DOMLE-9142): bench-top kit with base plate, steel rail, three axles and four plastic gears for one- and two-stage spur and planet gear train experiments on transmission ratio.
Note: Bench-top spur gear train kit with swivelling rail for planet gear demonstrations; supplied by JaincoLab.
View Details
Scotch Yoke Mechanism (SKU JA-DOMLE-9147): table-top unit with anodised aluminium crank disc, adjustable crank radius, angle scale and ruled straight guide for studying pure harmonic reciprocating motion.
Note: Scotch yoke table model with adjustable crank radius, angle scale and stroke ruler; supplied by JaincoLab.
View Details
Strain Gauge Transducers (SKU JA-MLLE-9158): instrumentation trainer with cantilever strain gauges in half/full bridge, 0-20 mm micrometer, speed sensing (0-4000 rpm slotted wheel) and ultrasonic and audio sound sensing.
Note: Strain, speed and sound transducer trainer with bridge amplifier and 4-20 mA output; manufactured by JaincoLab.
View Details
Solar Radiation Sensor (SKU JA-DAS-9203): silicon-photodiode pyranometer for global solar radiation, with cosine cut-off ring, level indicator, alignment fins and amplifier output of 0 to +2.5 VDC.
Note: Silicon photodiode solar radiation sensor with 0-2.5 V output; supplied by JaincoLab.
View Details
Saw Sharpening File Set (SKU JA-MWLE-9234): set of 3 triangular (three-square) files for sharpening hand saw teeth; lengths, cut and handles confirmed on the quotation.
Note: Set of three triangular saw-sharpening files; sizes on the quotation; supplied by JaincoLab.
View Details
Structure of Flower Chart (SKU JA-BC-9252): 58 x 90 cm wall chart on the structure of a flower, printed in full colour on art paper, laminated on both sides with thick plastic film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on the structure of a flower with plastic rollers, for middle-school science and Class 10 to 12 biology.
View Details
Spirogyra Chart (SKU JA-BC-9284): 58 x 90 cm wall chart on Spirogyra, the filamentous green alga, printed in full colour on art paper, laminated on both sides with thick plastic film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on Spirogyra, the filamentous green alga with plastic rollers, for Class 11 biology and B.Sc botany.
View Details
Stem Modification Chart (SKU JA-BC-9297): 58 x 90 cm wall chart on the modifications of stems, printed in full colour on art paper, laminated on both sides with thick plastic film and fitted with plastic rollers. English text.
Note: Laminated and full-colour 58 x 90 cm wall chart on the modifications of stems with plastic rollers, for Class 11 biology and B.Sc botany.
View Details
Sanding Block (SKU JA-MWLE-9299): cork hand sanding block, 120 x 70 x 50 mm, for holding abrasive paper flat when finishing timber, filler and paint.
Note: Cork sanding block, 120 x 70 x 50 mm; supplied by JaincoLab.
View Details
Saw Clamp For Filing (SKU JA-MWLE-9301): mild steel saw vice with 200 mm wide clamp mouth and lock-grip lever, mounted on a solid wood board, for holding saws during sharpening.
Note: Mild steel saw clamp with 200 mm mouth on a wood board; supplied by JaincoLab.
View Details
Saw Teeth Setting Pliers (SKU JA-MWLE-9303): aluminium saw-set pliers with hardened 1.5 mm HSS pin, adjustable 0.7-2 mm set, for blades of 1.5 mm pitch or more.
Note: Adjustable saw-set pliers with HSS pin; supplied by JaincoLab.
View Details
Scriber (SKU JA-MWLE-9304): double-ended hardened steel engineers scriber with knurled and blackened grip, for marking out layout lines on metal; length on the quotation.
Note: Double-ended hardened steel engineers scriber; length on the quotation; supplied by JaincoLab.
View Details
Shell Boring Bits For mortises Set (SKU JA-MWLE-9305): 19 mm diameter, 450 mm long boring bit for removing mortise waste and deep holes in timber; set make-up confirmed on the quotation.
Note: Mortise boring bit, 19 mm x 450 mm listed; set make-up on the quotation; supplied by JaincoLab.
View Details
Shoulder Plane (SKU JA-MWLE-9315): Stanley shoulder plane, 5-1/2 inch long, 3/4 inch wide, 485 g, converting to a chisel plane, for trimming tenons and rebates.
Note: Stanley 3/4 inch shoulder plane convertible to chisel plane; supplied by JaincoLab.
View Details
Spanners (SKU JA-MWLE-9316): chrome vanadium adjustable spanners in 6, 8, 10 and 12 inch, ferronickel plated, heavy-duty rubber handles, packed in slide cards.
Note: Chrome vanadium adjustable spanners, 6-12 inch; supplied by JaincoLab.
View Details
Spanners Set (SKU JA-MWLE-9317): 13-piece set of chrome vanadium combination spanners (ring and open end) in double-blister packing; sizes confirmed on the quotation.
Note: 13-piece chrome vanadium combination spanner set; sizes on the quotation; supplied by JaincoLab.
View Details
Spindle Moulder Cutters (SKU JA-MWLE-9325): spindle moulder tooling with adjustable groove and bevel heads, 10-type exchange profile head, cassette head, 40/80 mm block heads and counter-profile set.
Note: Spindle moulder cutter heads set; spindle fit confirmed on the quotation; supplied by JaincoLab.
View Details
Spindle Moulder Feeder (SKU JA-MWLE-9326): power feed unit with 4 speeds (4, 8, 11, 22 m/min), 120 x 60 mm rollers and 1 hp 380 V 3-phase motor, supplied mounted on the spindle moulder.
Note: Four-speed spindle moulder power feeder, 1 hp 3-phase; supplied by JaincoLab.
View Details
Spoke Shave Flat Face (SKU JA-MWLE-9340): flat-face spokeshave with 2-3/8 inch (73 mm) cutter, lateral and vertical adjustment, for chamfering and shaping curved work.
Note: Flat-face spokeshave with 73 mm adjustable cutter; supplied by JaincoLab.
View Details
Spoke Shave Round Face (SKU JA-MWLE-9341): Record round-face spokeshave, 250 x 54 mm, malleable iron handles, fully adjustable tool-steel cutter, for concave and curved surfaces.
Note: Record round-face spokeshave, 250 x 54 mm; supplied by JaincoLab.
View Details
Spray Booth System (SKU JA-MWLE-9342): 2000 x 2070 mm working area, 3.0 mยฒ filter surface, 8500 mยณ/hour extraction fan with 1.5 kW 3-phase motor, 465 mm duct, extraction through the workshop wall.
Note: Paint spray booth with 8500 mยณ/hour wall extraction and a 1.5 kW three-phase motor; supplied by JaincoLab.
View Details
Spray Gun (SKU JA-MWLE-9343): refillable spray gun with plastic cup and adjustable fan, nozzle sizes 1.0 mm (mini), 1.8, 2.0 and 2.5 mm, for spray painting and applying adhesives in workshop training.
Note: Refillable spray gun with plastic cup and adjustable fan, in four nozzle sizes; supplied by JaincoLab.
View Details
Square Ruler (SKU JA-MWLE-9344): 3 inch x 4 inch L-shaped stainless steel square, 0.022 inch thick, with 3/32 inch intervals on the front and metric equivalents on the back, for checking angles and marking out.
Note: L-shaped 3 x 4 inch stainless steel square ruler with imperial and metric scales; supplied by JaincoLab.
View Details
Steel Cabinet (SKU JA-MWLE-9345): 930 x 1950 x 400 mm lockable cabinet with wing doors and four galvanized shelves, 75 kg each, height adjustable in 15 mm steps, for workshop and store storage.
Note: Lockable steel cabinet with four adjustable galvanized shelves rated 75 kg each; supplied by JaincoLab.
View Details
Steel Drawer Cabinets (SKU JA-MWLE-9346): steel drawer cabinet listed at 900 x 650 (width) x 728 (depth) mm with eight drawers - 2 x 75, 4 x 100, 1 x 150 and 1 x 200 mm high - for tool and parts storage.
Note: Steel drawer cabinet with eight drawers from 75 to 200 mm high; supplied by JaincoLab.
View Details
Steel Racks (SKU JA-MWLE-9347): industrial-type metal rack with 5 shelves, 1800 mm high x 900 mm long x 450 mm deep, 265 kg load per shelf, powder-coated or scratch-resistant finish, approx. 20 kg.
Note: Five-shelf industrial steel rack rated 265 kg per shelf; supplied by JaincoLab.
View Details
Straight Edges (SKU JA-MWLE-9348): 3000 x 110 x 25 mm structural alloy straight edge, graduated in metric at 5 mm intervals and numbered every 50 mm, for checking flatness and guiding long cuts.
Note: 3000 mm structural alloy straight edge with metric graduations; supplied by JaincoLab.
View Details
Specific gravity metal specimen set (SKU JA-MLE-9358): four cylinders of aluminium, brass, steel and copper, 5 cm long and 1.3 cm in diameter, sized for a graduated cylinder, for density and specific gravity work.
Note: Four cylinders: aluminium, brass, steel and copper.
View Details
Solids material kit (SKU JA-MLE-9361): two each of 17 blocks in woods, paraffin wax, aluminium, iron, lead, brass, polystyrene, Perspex, glass, slate and marble, in listed sizes, for density and materials comparison work.
Note: Two of each block are supplied, 34 pieces in total.
View Details
Specific gravity set (SKU JA-MLE-9364): four equal square-section specimens, 13 mm wide and 50 mm long, of aluminium, brass, steel and copper, for density and specific gravity experiments.
Note: Four equal-size specimens: aluminium, brass, steel and copper.
View Details
Spare stand (SKU JA-MLE-9369) for use with the Archimedes Principle Kit, which is supplied without its own base, rod and suspension hook; for supporting the newton meter and solids in upthrust experiments.
Note: Ordered separately from the Archimedes Principle Kit.
View Details
Set of masses (SKU JA-MLE-9377): complete 505 g series of 12 masses, each with double hooks and a clearly marked value, for building up loads in Hooke's law, moments and pulley experiments.
Note: Twelve masses, 505 g in total, each with double hooks.
View Details
Stainless steel S hooks (SKU JA-MLE-9378) for hanging masses, spring balances, pulleys and other apparatus from stands and rods in school and college mechanics practicals.
Note: Sizes and pack quantities are confirmed on the quotation.
View Details
Sound box (SKU JA-SW-9410): 56 mm, 8 ohm loudspeaker of reasonable fidelity in a strong housing with metal grille and two 4 mm sockets, for converting signals to sound in physics experiments or as an extension speaker.
Note: Connects with 4 mm banana plugs.
View Details
Singing rods set (SKU JA-SW-9413): solid rods 70 x 1, 70 x 1.2, 76 x 1.2 and 100 x 1.2 cm and a hollow 70 x 1 cm rod, with resonance powder, for demonstrating longitudinal vibrations and resonance.
Note: Resonance powder is included.
View Details
Sodium lamp (SKU JC-LOE-9423): tubular sodium spectral lamp in a pillar on its power supply, with a rotating ventilated shield of slits and apertures, for spectrometer and optical work; also takes mercury, neon or helium lamps.
Note: Also accepts mercury, neon or helium spectral lamps.
View Details
Sun Spot solar oven (JA-H-9424) whose reflective surfaces concentrate heat radiation in a central chamber, reaching up to 350 degrees as listed. A teacher's guide gives suggestions for classroom experiments.
Note: Reflective solar oven that concentrates heat radiation in a central chamber for first-hand solar radiation experiments, with a teacher's guide.
View Details
Spouting Vessel Plastic (SKU JA-FMDE-9436): plastic spouting vessel with 3 jets for showing that liquid pressure increases with depth in school science and physics lessons.
Note: Plastic vessel with 3 jets. Capacity and dimensions are confirmed on the quotation.
View Details
Syringe Clamp (SKU JA-FMDE-9439): clamp for holding a syringe in position during school and college laboratory experiments. Compatible syringe sizes are confirmed on the quotation.
Note: Holds a syringe in position during experiments. Compatible syringe sizes are confirmed on the quotation.
View Details
Salt Bridge (SKU JC-FMDE-9449): inverted U tube with sintered discs at both ends, 13 mm arms, 80 mm wide and 100 mm high, for making reversible cells in cell EMF experiments.
Note: Arms 13 mm diameter; overall 80 mm wide and 100 mm high. Used to make reversible cells for EMF measurements.
View Details
Sand Timer (SKU JA-FMDE-9452): 30 minute sand timer, 22 cm tall, with two connected glass bulbs that let a regulated trickle of sand run from top to bottom, for timing lessons and practical work.
Note: Measures 30 minutes and stands 22 cm high. Needs no batteries or power supply.
View Details
Sodium Chloride Solution (SKU JA-MCE-9463): standard solution containing 30 g/L NaCl, used to verify the accuracy of salinity determinations and to calibrate the equipment used for them. Supplied by JaincoLab.
Note: 30 g/L sodium chloride standard solution for salinity checks; volume confirmed on the quotation.
View Details
Spin bar (SKU JA-CE-9469): magnetic stirring bar for use on magnetic stirrers, in five lengths of 20, 30, 40, 50 and 60 mm to suit beakers and flasks of different sizes. Coating and shape are confirmed on the quotation.
Note: Lengths 20, 30, 40, 50 and 60 mm. Coating and shape are confirmed on the quotation.
View Details
Smart Flow Transmitter Learning System (SKU JC-PCTE-9474): differential pressure flow transmitter with 4-20 mA output for a process control trainer, connecting to optional pitot tube, venturi and orifice plate transducers.
Note: 4-20 mA differential pressure flow transmitter add-on; supplied by JaincoLab.
View Details
Statics and Vibrations (SKU JA-MWLE-9475): suspended beam apparatus - light alloy beam on cables over ball bearing pulleys, tension set by masses on stirrups, loads at several points - for cable tension experiments.
Note: Suspended beam apparatus for measuring cable tension under distributed loads; supplied by JaincoLab.
View Details
Structural Engineering Learning System (SKU JA-MWLE-9495): introductory civil engineering trainer covering structural analysis fundamentals, structural stability, force vectors and bridge design and construction.
Note: Introductory structural engineering and bridge design trainer; supplied by JaincoLab.
View Details
Structural Engineering 2 Learning System (SKU JA-MWLE-9496): truss bridge trainer with data acquisition system, strain-gauged bridge components, test fixture hardware and multimedia curriculum, for statics and bridge analysis.
Note: Strain-gauge truss bridge trainer with data acquisition; supplied by JaincoLab.
View Details
Single Effect Falling Film Evaporation Pilot Plant (SKU JA-CELE-9519): 0.27 mยฒ falling film evaporator, 1.1 mยฒ condenser, metering pumps, 25 L feed tank, steam flow control and measurement, 6 Pt100 sensors.
Note: Single effect falling film evaporation pilot plant; steam source confirmed on quotation; supplied by JaincoLab.
View Details
Spray Dryer Process Unit (SKU JA-CELE-9524): laboratory spray dryer with nozzle atomiser and built-in compressor, drying chamber, cyclone, 3,000 W heater, variable speed fan, peristaltic pump to 1,500 ml/h, touch screen.
Note: Laboratory spray dryer with cyclone collection and touch screen control; supplied by JaincoLab.
View DetailsSwitching Power Supply Trainer (SKU JA-CAAP-9552): computer SMPS trainer for operation, theory, servicing, fault diagnosis and repair, with standard power cord and PC connection cable.
Note: Computer switching power supply trainer; supplied by JaincoLab.
View Details
Signal Conditioning Trainer for Data Acquisition (SKU JA-DAS-9558): introductory trainer on analog and digital signals and their conditioning for computer data acquisition and control.
Note: Introductory signal conditioning trainer for data acquisition; supplied by JaincoLab.
View Details
Sensor and Transducer Trainer (SKU JA-DAS-9559): modular training system with a base station and plug-in experiment modules covering sensors, transducers and their signal processing.
Note: Modular sensor and transducer trainer; supplied by JaincoLab.
View DetailsThe Stereo Hi-Fi Trainer is built around a compact combo-type stereo hi-fi system and demonstrates stereo operation, theory, repair and servicing techniques for units of this type.
Note: The Stereo Hi-Fi Trainer is built around a compact combo-type stereo hi-fi system and demonstrates stereo operation, theory, repair and servicing techniques for units of this type.
View DetailsThe Satellite TVRO System Trainer is a complete system for training in the theory, operation, installation, maintenance, troubleshooting and repair of satellite TV receive-only (TVRO) systems.
Note: The Satellite TVRO System Trainer is a complete system for training in the theory, operation, installation, maintenance, troubleshooting and repair of satellite TV receive-only (TVRO) systems.
View DetailsSectioned electrical motors are original electric motors carefully cut away to expose all key operational parts, for demonstrating how different motor types work.
Note: Sectioned electrical motors are original electric motors carefully cut away to expose all key operational parts, for demonstrating how different motor types work.
View DetailsThe Security Alarm Trainer introduces students and technicians to basic security alarm systems, as a first step towards installing and maintaining alarm systems.
Note: The Security Alarm Trainer introduces students and technicians to basic security alarm systems, as a first step towards installing and maintaining alarm systems.
View DetailsThe Solar Energy Trainer is a compact educational unit for classroom and remote-site use that introduces kcal (BTU) measurement and the calculation of the heat-absorbing capacity of solar panels.
Note: The Solar Energy Trainer is a compact educational unit for classroom and remote-site use that introduces kcal (BTU) measurement and the calculation of the heat-absorbing capacity of solar panels.
View DetailsThe boiler-type solar energy trainer represents a solar hot water heating system of the kind used in homes and commercial buildings: a solar collector with a separate boiler (hot water storage tank) fitted with a supplementary electric heater.
Note: The boiler-type solar energy trainer represents a solar hot water heating system of the kind used in homes and commercial buildings: a solar collector with a separate boiler (hot water storage tank) fitted with a supplementary electric heater.
View DetailsThe Solar Energy Hot Water System Trainer is modelled on the solar water heaters in common residential and commercial use.
Note: The Solar Energy Hot Water System Trainer is modelled on the solar water heaters in common residential and commercial use.
View DetailsThe Solar Energy Demonstrator introduces students to generating electrical power from the sun with solar cells.
Note: The Solar Energy Demonstrator introduces students to generating electrical power from the sun with solar cells.
View DetailsSplit Air Conditioner Trainer (SKU JA-ACAR-9634): fully operational classroom trainer with all the basic components of a split air conditioner, for cycle study, component layout, installation review, servicing and troubleshooting.
Note: Operational split air conditioner trainer designed for classroom instruction; supplied by JaincoLab.
View DetailsSeries and Parallel Pump Test Set (SKU JA-ACAR-9648): self-contained bench-top unit with two independent centrifugal pump sets, flow control valves for single, series or parallel running, electronic sensors and PC data acquisition software.
Note: Bench-top test set for single, series and parallel centrifugal pump performance with PC data acquisition; supplied by JaincoLab.
View DetailsSteam Jet Refrigeration System (SKU JA-ACAR-9664): bench-top unit with a steam jet thermo-compressor instead of a mechanical compressor, refrigerant and vapour circuits linked by condenser and steam ejector, transparent evaporator and condenser.
Note: Bench-top steam jet refrigeration unit with transparent evaporator and condenser; supplied by JaincoLab.
View DetailsSectioned Air Conditioning Components (SKU JA-ACAR-9665): original air conditioning and refrigeration components carefully cut away to expose key internal parts, with finished, colour-coded sections for identifying parts and functions.
Note: Cut-away original air conditioning and refrigeration components for teaching; supplied by JaincoLab.
View DetailsSectioned Air Conditioner Compressors and Pumps (SKU JA-ACAR-9666): original refrigerant compressors and pumps carefully cut away to expose all key internal parts, for demonstrating how compressors pressurise refrigerant.
Note: Cut-away original air conditioning and refrigeration compressors and pumps; supplied by JaincoLab.
View DetailsSectioned Industrial Valves (SKU JA-ACAR-9669): original industrial valves carefully cut away to expose all key internal parts, each mounted on a melamine base with teaching notes and internal construction diagrams.
Note: Cut-away original industrial valves on melamine bases with teaching notes; supplied by JaincoLab.
View DetailsSectioned Automotive Air Conditioning System (SKU JA-ACAR-9679): base-mounted sectioned set of the major automotive A/C parts: A/C pump, condenser, evaporator, filter drier, expansion valve and connecting hoses, with process diagram.
Note: Sectioned set of major automotive A/C components connected to show system flow; supplied by JaincoLab.
View DetailsStarting, Charging and Basic Ignition Trainer (SKU JA-AAT-9684): modular panel simulating automotive starting, charging and basic ignition circuits in real time, with wired schematic, test points and interactive fault simulation.
Note: Panel trainer for automotive starting, charging and basic ignition circuits; supplied by JaincoLab.
View DetailsSectioned Front Suspension Steering Unit (SKU JA-AAT-9689): complete vehicle front end, sectioned to show steering linkage, suspension, stabiliser, shock absorbers, alignment points and brakes for chassis training.
Note: Sectioned vehicle front end for demonstrating steering and suspension; supplied by JaincoLab.
View DetailsShock Absorber Test Stand (SKU JA-AAT-9690): demonstration and test stand for shock absorbers and suspensions with computer data acquisition and analysis of results, for automobile engineering labs.
Note: Test stand for shock absorber and suspension study with computer data acquisition; supplied by JaincoLab.
View DetailsSuspension and Shock Absorber Trainer (SKU JA-AAT-9691): real automotive components demonstrating computer-controlled damping and vehicle behaviour under braking, acceleration, cornering and road conditions.
Note: Trainer for modern suspension systems with computer-controlled damping; supplied by JaincoLab.
View DetailsSectioned Hydraulic Brake Units (SKU JA-AAT-9703): complete hydraulic brakes of the major types, sectioned to expose key internal parts and mounted on wooden base plates for classroom demonstration.
Note: Sectioned hydraulic brake models on wooden base plates; supplied by JaincoLab.
View DetailsShock Absorber Unit (SKU JA-AAT-9705): common types of shock absorber as original components or sectioned models, each attached to a board with original bushings, for classroom demonstration.
Note: Board-mounted original or sectioned shock absorbers for demonstration; supplied by JaincoLab.
View DetailsSectioned Transmission for Classroom Demonstration (SKU JA-AAT-9709): full size original transmission sectioned to expose key internal parts, with gearshift lever, hand wheel and optional wall chart.
Note: Sectioned full size transmission for gear operation demonstration; supplied by JaincoLab.
View DetailsSectioned Clutch Models (SKU JA-AAT-9712): four sectioned models representing the major types of clutch mechanism, for viewing the inner working of the clutch; complements the Clutch Demonstration Unit.
Note: Four sectioned clutch models of the major clutch types; supplied by JaincoLab.
View DetailsSectioned Torque Converter (SKU JA-AAT-9713): original passenger-car automatic transmission torque converter with the housing cut away to expose key internal components for classroom demonstration.
Note: Sectioned original automatic transmission torque converter; supplied by JaincoLab.
View DetailsSectioned Rear Axles for Classroom Demonstration (SKU JA-AAT-9715): sectioned rear axles in several types for demonstrating how power is transmitted to the rear wheels.
Note: Sectioned rear axles in several types for driveline teaching; supplied by JaincoLab.
View DetailsSectioned Automatic Transmission (SKU JA-AAT-9717): full size original automatic transmission sectioned for classroom teaching; models for rear wheel drive and transverse front wheel drive vehicles.
Note: Full size sectioned automatic transmission in RWD or FWD model; supplied by JaincoLab.
View DetailsSectional Instructional Engine Components (SKU JA-AAT-9720): range of engine components, each sectioned to expose key internal parts, with colour-coded painted sections for classroom instruction.
Note: Colour-coded sectioned engine components for classroom instruction; supplied by JaincoLab.
View DetailsSectioned Petrol Engine (SKU JA-AAT-9721): complete petrol engine and transmission with block, gearbox, alternator, distributor, carburettor, starter, water pump, thermostat, oil filter and fuel pump sectioned.
Note: Complete sectioned petrol engine and transmission for classroom demonstration; supplied by JaincoLab.
View DetailsSectioned Diesel Engine (SKU JA-AAT-9727): complete diesel engine and transmission with block, gearbox, alternator, fuel injection pump, starter, water pump, thermostat and oil filter sectioned.
Note: Complete sectioned diesel engine and transmission for classroom demonstration; supplied by JaincoLab.
View DetailsSectioned Heavy Duty Diesel Engines (SKU JA-AAT-9734): complete large diesel engines with block, transmission, alternator, injection pump, starter, water pump, thermostat and oil filter sectioned.
Note: Sectioned heavy duty diesel engines for heavy vehicle and marine training; supplied by JaincoLab.
View DetailsThese sectioned ignition system demo units show the construction and working of conventional breaker-point and electronic ignition systems using original parts.
Note: These sectioned ignition system demo units show the construction and working of conventional breaker-point and electronic ignition systems using original parts.
View DetailsSingle and Double Barrel Carburetors (SKU JA-AAT-9755): original or sectioned carburettors exposing float, valves, idle screw, venturi tubes, jets, butterfly valve and linkages, for demonstration or exhibits.
Note: Original or sectioned single and twin barrel carburettors; supplied by JaincoLab.
View DetailsSectioned Static Model (SKU JA-AAT-9763): cutaway static model of the automotive fuel system showing internal components and operating principles, for classroom or workshop teaching.
Note: Sectioned static fuel system model for classroom teaching; supplied by JaincoLab.
View DetailsSteering Linkage Teaching Aid / Parallel Crank Mechanism (SKU JA-AAT-9767): group-size mock-up of wheels and steering linkage, and table-top Plexiglas windscreen wiper parallel crank model.
Note: Steering linkage mock-up and parallel crank (wiper) model for classroom teaching; supplied by JaincoLab.
View DetailsSpecial Tools (SKU JA-AAT-9779): assortment of special tools matched to training engines, transmissions, front ends and rear axles, for disassembly and reassembly as recommended in workshop manuals.
Note: Special tools matched to automotive training units; supplied by JaincoLab.
View DetailsShop Workbench / Stackable Shop Stool (SKU JA-AAT-9780): knock-down workbench with welded C-channel legs, removable cross-joints and epoxy paint, plus lightweight stackable shop stool.
Note: Knock-down C-channel shop workbench and stackable stool for workshops; supplied by JaincoLab.
View Details
Sampleject 5000 soil specimen extractor for pushing undisturbed samples out of longer sampling tubes without adding disturbance, for laboratory testing after field investigation. Supplied by JaincoLab.
Note: Specimen extractor for undisturbed soil samples in long sampling tubes.
View Details
Sand pouring cylinder apparatus for in-place dry density of natural or compacted soils, with or without stones, by the sand replacement method, in layers over 15 cm and up to 25 cm thick; also for base materials.
Note: Sand replacement apparatus for in-place dry density of soils and base layers.
View Details
Shrinkage limit apparatus for clayey soil: a saturated specimen dries in air while its volume is measured by mercury immersion, giving shrinkage limit, shrinkage ratio, shrinkage index and volumetric shrinkage.
Note: Apparatus for the shrinkage limit and related shrinkage values of clayey soils.
View Details
Sieve shaker for mechanised sieve analysis of soil grain size, with a rapid vertical shaking action that keeps sieve apertures clear and stops them blinding.
Note: Vertical-action sieve shaker for soil particle size analysis.
View Details
Speedy moisture meter for rapid moisture content of soil, sand and fine-grained material by the calcium carbide method; built-in gauge reads % moisture on a wet weight basis, with a formula for dry weight basis.
Note: Calcium carbide moisture meter with built-in gauge calibrated in percent moisture.
View Details
Standard penetration test set for site investigation: 63.5 kg hammer falling 750 mm drives a split spoon sampler 300 mm to give the N value, used for foundation design and liquefaction assessment.
Note: SPT set with 63.5 kg hammer, 750 mm drop and split spoon sampler.
View Details
Static cone penetrometer with 60ยฐ cone of 10 cmยฒ base pushed by static thrust, for pile length and capacity estimates and continuous bearing profiles; 30 kN hand-operated and 100 kN engine-driven models; optional friction jacket.
Note: Static cone penetrometer in 30 kN hand-operated and 100 kN engine-driven models.
View Details
Swell test apparatus for the swelling pressure of soaked soil specimens moulded to known density and moisture: perforated swell plate, load transfer bar, proving ring on a hand-operated lead-screw load frame, soaking tank.
Note: Apparatus for the swelling pressure of expansive soil specimens, with proving ring and soaking tank.
View Details
Slake Durability Apparatus (SKU JA-RT-9855): apparatus for rock resistance to weathering and disintegration in water, testing up to four sample sets, with quick-coupling drums.
Note: Slake durability apparatus for rock weathering resistance; supplied by JaincoLab.
View DetailsSeries and Parallel Pumps Demonstration Unit (SKU JA-FMAHLE-9965): two centrifugal pumps (one variable speed 0-3300 rpm, one fixed), 40 L/min and 10 m head per pump, 650 W total, PVC pipework, 15 L tank, pressure and flow measurement, PC data.
Note: Two-pump centrifugal unit for individual, series and parallel operation, supplied by JaincoLab.
View DetailsStability of Floating Bodies (SKU JA-FMAHLE-9984): transparent floating body 300 x 130 x 190 mm with 400 mm mast, horizontally (196 g) and vertically (575 g) movable clamped weights, clinometer ยฑ35ยฐ, scales and 50 L water tank.
Note: Metacentric height apparatus with transparent floating body, sliding weights and clinometer, supplied by JaincoLab.
View DetailsSeries and Parallel Configuration Pumps (SKU JA-FMAHLE-9997): two identical 370 W centrifugal pumps with ball valves for series or parallel operation, 13 L transparent intake tank with overflow, PVC pipework, inlet and outlet manometers; 21 L/min, 12 m.
Note: Two-pump trainer for series and parallel pump operation, supplied by JaincoLab.
View Details
Supplemental Sieves (SKU JA-S-10024): 3 inch all stainless test sieves in metric openings from 9.0 mm to 1.80 mm (9.0, 7.1, 5.0, 4.5, 3.55, 3.15, 2.5, 2.24, 1.80 mm), full height, several also in half height.
Note: 3 inch all stainless supplemental sieves in metric openings from 9.0 mm to 1.80 mm, full or half height.
View DetailsThey illustrate the relationships between numbers as well as the inverse relationship between basic operations View Details
Colorful, 8-digit calculator includes four basic functions plus percent, square root and plus/minus keys View Details
Jainco is leading a scientific calculator is a type of electronic calculator, usually but not always handheld View Details
Features numerator and denominator keys as well as a simplify function that simplifies fractions View Details
The simple four-function calculator sets up the problem exactly as young students are taught to write it out. View Details

Stand base (SKU JL-LEP-10126) used as the base support of activity equipment set-ups, carrying the support rod, clamps and rings of a laboratory stand in school and college science practicals. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used as the base support of activity equipment set-ups.
View Details
Stand support rod (SKU JL-LEP-10127) used to support the stand base assembly, giving an upright rod on which clamps, rings and bossheads are mounted in school and college science practicals. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used to support the stand base assembly.
View Details
Storage case (SKU JL-LEP-10128) with cover and base sheathing, used to store laboratory stand bases and able to hold free fall apparatus set components in school science laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. With cover and base sheathing; stores stand bases and free fall apparatus set components.
View Details
Storage case (SKU JL-LEP-10131) with cover and base sheathing for storing multiclamps and test tube holders; capacity 25 multiclamps and 5 test tube holders, for school science laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. With cover and base sheathing; holds 25 multiclamps and 5 test tube holders.
View Details
Storage case (SKU JL-LEP-10134) with cover and base sheathing for storing clamps and bossheads; capacity 12 universal clamps and 10 universal bossheads, for school science laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. With cover and base sheathing; holds 12 universal clamps and 10 universal bossheads.
View Details
Steel spherical ball (SKU JL-LEP-10138), ร 12.7 mm, used as the free fall object in the free fall activity of school physics laboratories, held by the solenoid and timed by the digital timer. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. ร 12.7 mm steel ball used as the free fall object in free fall activity.
View Details
Solenoid assembly (SKU JL-LEP-10142) used as an electromagnet to temporarily suspend the metal balls or the metal-embedded plastic ball at the start of the free fall activity in school physics laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used as an electromagnet to temporarily suspend the metal balls or the metal-embedded plastic ball.
View Details
Synchro box assembly (SKU JL-LEP-10143) used to start the stopwatch and cut off current to the solenoid at the same moment, so the ball is released as timing begins in the free fall activity. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used to simultaneously start the stopwatch and cut off current to the solenoid.
View Details
Storage case (SKU JL-LEP-10144) with a cover and base sheathing that holds the complete free fall apparatus set, keeping its parts together and protected in the school physics laboratory between practical sessions.
Note: Storage case with cover and base sheathing for the free fall apparatus set. It keeps the set complete between practical sessions.
View Details
Stopper fork assembly (SKU JL-LEP-10152) used as a low-inertia string guide in Newton's second law of motion experiment, carrying the string from the dynamics cart to the hanging driving mass in school physics practicals.
Note: Stopper fork assembly used as a low-inertia string guide in Newton's second law of motion experiment.
View Details
Thin string (SKU JL-LEP-10153) that transmits the net force from the weight of the 3 gram driving masses to pull dynamics carts along the rail in Newton's second law of motion experiment.
Note: Thin string that transmits the net force from the 3 gram driving masses to pull dynamics carts along the rail.
View Details
Storage case (SKU JL-LEP-10154) with a cover and base sheathing for the Dynamics Carts-Rail System and its accessories, keeping carts, rail parts and small items together between school physics practicals.
Note: Storage case with cover and base sheathing for the Dynamics Carts-Rail System and accessories.
View Details
Single pulley (SKU JL-LEP-10163) used to demonstrate that a pulley can change the direction of a force, lifting a hooked mass by pulling down on a string in school physics simple machines activities. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used to demonstrate that a pulley can change the direction of a force.
View Details
Spur Gear B (SKU JL-LEP-10165), a spare part for the motorized cart that transmits torque to Worm Gear A in the cart drive, for school physics laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Spare part for the motorized cart; transmits torque to Worm Gear A.
View Details
Spur Gear C (SKU JL-LEP-10166), a spare part for the motorized cart used to change the direction of the motor torque in the cart drive, for school physics laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Spare part for the motorized cart; changes the direction of motor torque.
View Details
Thick string (SKU JL-LEP-10169), supplied as 1 ball per set, used to interconnect pulley combinations in simple machines activities in school physics laboratories. As per DepEd guidelines.
Note: As per DepEd guidelines. Thick string, 1 ball per set, used to interconnect pulley combinations.
View Details
Storage case (SKU JL-LEP-10170) for the motorized cart, pulley sets, lever assembly, leveling hoses and spare parts, keeping the simple machines and motion apparatus together in school physics laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Storage case for the motorized cart, pulley sets, lever assembly, leveling hoses and spare parts.
View Details.jpg)
Set of coils (SKU JL-LEP-10175) used to demonstrate the transformer principle in electricity and magnetism lessons in school physics laboratories. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used to demonstrate the transformer principle.
View Details
Storage cabinet (SKU JL-LEP-10185) for storing science and mathematics equipment in school laboratories and classrooms, keeping apparatus, kits and teaching aids in one place. Made as per DepEd guidelines.
Note: Made as per DepEd guidelines. Used for storage of science and mathematics equipment.
View Details
Hanging-type spring scale (SKU JL-LEP-10231) for measuring the mass of an object up to 1,000 grams, graduated in grams and kilograms with 5 g minimum divisions from zero, in a body about 180 x 70 x 30 mm.
Note: As per DepEd guidelines. Hanging-type spring scale measuring up to 1,000 grams.
View Details
Analog weighing scale (SKU JL-LEP-10232): mechanical spring-lever kitchen-type scale, 0 to 10 kg / 22 lb, round dial in kg and lb with 50 g / 1 oz increments, removable stainless steel bowl, 210 x 235 mm, blue.
Note: As per DepEd guidelines. Mechanical dial scale, 10 kg capacity, removable stainless steel bowl.
View Details
Bathroom-type weighing scale (SKU JL-LEP-10233): mechanical analog scale with dual lbs/kg reading, 0 to 120 kg (264 lbs), metal and plastic construction with powder-coated metal parts, supplied with a laminated BMI chart.
Note: As per DepEd guidelines. Supplied with a printed, laminated BMI chart.
View Details
Sedimentator tube (SKU JL-LEP-10237): sealed, leak-free clear plastic tube, 11-12 in tall and at least 1 in across, containing different sediments and water to show settling, deposition and layering, linked to sedimentary rock and fossil formation.
Note: As per DepEd guidelines. Sealed, leak-free tube with sediments and water.
View Details
Metal slinky coil (SKU JL-LEP-10239) of zinc or nickel plated metal, at least 3 inches in diameter and 4 inches long, used to demonstrate longitudinal waves with their compressions and rarefactions in school physics lessons.
Note: As per DepEd guidelines. Zinc or nickel plated metal coil for longitudinal wave demonstrations.
View Details
Spoon spatula (SKU JL-LEP-10276): uniformly glazed, smooth white porcelain with a broad flat blade at one end and a spoon at the other, at least 140 mm long, for transferring small amounts of solids and liquids.
Note: As per DepEd guidelines. Dual-ended glazed porcelain spoon spatula.
View Details
Stirring rod (SKU JL-LEP-10277): long, slender solid rod of clear, bubble-free borosilicate glass, 6-6.3 mm in diameter and 250-254 mm long with rounded ends, used to mix liquids and solids in beakers and flasks.
Note: As per DepEd guidelines. Solid borosilicate glass rod with rounded ends.
View Details
Seismograph model (SKU JL-LEP-10307): recording pen on a suspended weight, chrome-plated 325 mm rod and support, galvanised iron recording frame, 65 mm paper roll, painted metal base at least 295 x 155 x 25 mm and a table clamp.
Note: As per DepEd guidelines. Earthquakes are simulated by vibrating the table the model is clamped to.
View Details
Solar system model (SKU JL-LEP-10308) in plastic: the sun and major planets in correct order from nearest to farthest, each colour coded and shaded and turned by hand to revolve around the sun; package at least 21 x 18.2 x 6 cm.
Note: As per DepEd guidelines. Each planet can be revolved around the sun by hand.
View Details
Sun internal structure model (SKU JL-LEP-10309): plastic sphere at least 12 in across with a detachable quarter showing the Core, Radiation Zone, Convection Zone, Photosphere, Chromosphere, Prominence and Sunspots, on a hard plastic stand.
Note: As per DepEd guidelines. 1/4 detachable section with permanent layer labels.
View Details
Sun earth moon model (SKU JL-LEP-10310): hand-operated gear drive moves the earth and moon around an illuminated sun of at least 6 in, showing rotation, revolution, day and night, axial tilt, moon phases and eclipses; chrome-plated parts.
Note: As per DepEd guidelines. Hand-operated gear drive; illuminated sun sphere.
View Details
3D relief skin block model (SKU JL-LEP-10331) in non-toxic plastic showing the epidermis, dermis, hypodermis, glands, hair follicle, Pacinian corpuscle, nerves and blood vessels, for teaching the skin as a sense organ.
Note: Made as per DepEd guidelines. A non-toxic plastic 3D relief model of a block of human skin.
View Details
Sublevel Orbitals of the Atom Model (SKU JL-LEP-10344): set of 12 3D models of the 1s, 2s, 2px, 2py and 2pz orbitals showing electron positions on the x, y and z axes, for teaching electron configuration.
Note: Made as per DepEd guidelines. Covers the first ten elements of the Periodic Table.
View Details
Screwdriver Flat 6" (SKU JL-LEP-10359): chrome vanadium flat screwdriver, 6 inches long with a 3/16-inch tip, used to drive flat head screws when assembling apparatus and wiring terminals in labs and workshops.
Note: Made as per DepEd guidelines. Chrome vanadium, 3/16 inch tip width.
View Details
Screwdriver Phillips 6" (SKU JL-LEP-10360): chrome vanadium Phillips screwdriver, 6 inches long with a #3 point blade, used to drive Phillips-type screws when assembling and maintaining lab and workshop equipment.
Note: Made as per DepEd guidelines. Chrome vanadium, #3 point size blade.
View Details
Soldering Iron, 60 watts (SKU JL-LEP-10361): small-type 60 W soldering iron with a wooden handle, used to heat electrical contacts and make permanent soldered joints in electronics and electricity practicals.
Note: Made as per DepEd guidelines. Small type, 60 W, wooden handle.
View Details
Soldering Lead (SKU JL-LEP-10362): 1 mm diameter solder wire, grade 60/40, on 1 lb spools, used with a soldering iron to make permanent joints on electrical and electronic components in lab and workshop practicals.
Note: Made as per DepEd guidelines. 1 mm diameter, grade 60/40, 1 lb per spool.
View Details
Soldering Paste (SKU JL-LEP-10363): all-purpose, non-corrosive flux in 50 g cans, used to give better adhesion of solder lead to electrical joints when soldering wires and components in electronics practicals.
Note: Made as per DepEd guidelines. Non-corrosive, 50 g net per can.
View Details
Sling Psychrometer (SKU JL-LEP-10378): two red spirit thermometers (-5 to +50 C), built-in water reservoir, wet-bulb wick, 4 spare wicks and a slide rule that converts readings to relative humidity.
Note: Made as per DepEd guidelines. Size 7 to 8 inches long, 1 to 2 inches in diameter.
View Details
Soil pH Moisture Sunlight Meter (SKU JL-LEP-10379): three-in-one meter with two 7-10 in electrodes and selector switch, reading soil pH 3.5-8, moisture 1-10 and light 0-2000 lux for garden and field studies.
Note: Made as per DepEd guidelines. pH, moisture and sunlight are selected with one switch.
View Details
Soil/Test Sieve (SKU JL-LEP-10380): set of six 8-10 inch stainless steel sieves in 5, 10, 35, 60, 120 and 230 mesh with lid and catch pan, used to separate soil particles by size.
Note: Made as per DepEd guidelines. Stainless steel, supplied with lid and catch pan.
View Details
Safety Goggles Polycarbonate (SKU JL-LEP-10387): Class 2B cover goggles, clear polycarbonate lens, anti-splash, anti-fog, anti-scratch, 180-degree view, indirect vents, elastic headband, fits over glasses.
Note: Made as per DepEd guidelines. OTG compatible; clear lens.
View Details
Strobe Light (SKU JL-LEP-10392): white LED strobe, 2.5-250 Hz steplessly variable with pulse-width control, rechargeable batteries and charger or DC adapter, RCA connection for a frequency meter, about 171 g.
Note: Made as per DepEd guidelines. Charger for the rechargeable batteries is included.
View Details
Scientific Calculator (SKU JL-LEP-10399): at least 240 built-in functions, two-line LCD, trigonometric, logarithmic, hyperbolic and statistical functions, permanently labelled keys, battery and solar power.
Note: Made as per DepEd guidelines. Dual power: battery and built-in solar cell.
View Details
Set of Connectors Black (SKU JL-LEP-10424): 18 all-black leads of stranded copper, at least 350 mm long, with an insulated brass alligator clip at one end and a 4 mm brass banana plug at the other.
Note: Made as per DepEd guidelines. 18 leads per set.
View Details
Set of Connectors Red (SKU JL-LEP-10425): 18 red stranded copper leads, at least 350 mm long, each with an insulated brass alligator clip (18-20 mm jaw) and a 4 mm brass banana plug, for positive circuit connections.
Note: Made as per DepEd guidelines. All-red insulation.
View Details
Set of Connectors Yellow (SKU JL-LEP-10426): 18 yellow stranded copper leads, at least 350 mm long, each with an insulated brass alligator clip and a 4 mm brass banana plug, for non-polar circuit connections.
Note: Made as per DepEd guidelines. All-yellow insulation.
View Details
Single pole Single Throw Knife type switch (SKU JL-LEP-10430): SPST knife switch, nickel-plated brass knife and contact plates, plastic handle, black plastic base at least 12 x 60 x 95 mm, for circuit practicals.
Note: Made as per DepEd guidelines. Contact plates at least 0.5 mm thick.
View Details
See-Saw (SKU JL-PK-10432): red plastic preschool see-saw, 1180 x 320 x 450 mm, blow-moulded base, 220 mm seating base, packed one per poly bag. Supplied by JaincoLab.
Note: Red plastic preschool see-saw, 1180 x 320 x 450 mm.
View Details
Slide Ladder (SKU JL-PK-10433): full-arch preschool slide, 1430 x 390 x 860 mm assembled, 1130 mm slide, 4-step stair panel, virgin polyethylene min 12 kg, blue. Supplied by JaincoLab.
Note: Blue full-arch preschool slide ladder, virgin polyethylene, 1430 mm long.
View Details
Digital timer and measurement system for the student laboratory (Cat. No. JSS-452/01): 0.1 ms timing resolution, memory function, and timing of sensor-detected events such as speed and acceleration with standard photogates.
Note: Student-lab digital timer, 0.1 ms resolution, memory function, works with photogates.
View Details
Digital stopwatch (Cat. No. JSS-329/03) timing to 1/100 second, also showing normal time in hours, minutes and seconds with day, date and month, and fitted with an alarm.
Note: Digital stopwatch, 1/100 s, clock with day/date/month display and alarm.
View Details
Demonstration set for comparing the heat capacities of metals (Cat. No. JSS-747/012): a slide with a slanted panel and four grooves holding four different metals, with an instruction manual on density, mass, specific gravity and specific heat.
Note: Four-metal specific heat demonstration set with slanted grooved slide and manual.
View Details
Soil Analysis Kit (SKU JL-GLE-10474, Cat. No. JSS-249/025): 250 ml chemical beaker, dropper, funnel, plastic stirrer, 100 ml graduated cylinder and spoon.
Note: Beaker, 100 ml cylinder, funnel, dropper, stirrer and spoon.
View Details
Simple Respirator (SKU JL-GLE-10475, Cat. No. JSS-251/026): three-ball breathing exerciser with ABS chamber, PE balls and mouthpiece and EVA tubing, for teaching and demonstration of breathing. Supplied by JaincoLab.
Note: Three-ball breathing exerciser for teaching use.
View Details
Simulator and Spinal Discopathy model (SKU JL-GLE-10482, Cat. No. JSS-257/029): full-size, fully articulating L2, L3 and L4 vertebrae with intervertebral discs and lumbar nerve section, showing two examples of disc disease.
Note: Full-size L2-L4 vertebrae model with two disc disease examples.
View Details
Scaled Pipettes (SKU JL-GLE-10508, Cat. No. JSS-287/044): graduated glass pipette, 10 ml, chemical and heat resistant.
Note: 10 ml graduated glass pipette.
View Details
Semi-Analytical Scales with Weight Stones (SKU JL-GLE-10542, Cat. No. JSS-332/066): 200 g balance, 100 mg sensitivity, die-cast aluminium housing, piece counting, percent and density modes, with mg weights. Supplied by JaincoLab.
Note: 200 g balance with piece-count, percent and density modes, plus mg weights.
View Details
Spoon Spatula (SKU JL-GLE-10547, Cat. No. JSS-340/070): white porcelain spoon spatula, 120 mm long, chemical resistant, for laboratory use.
Note: White porcelain spoon spatula, 120 mm.
View Details
Soluble Starch (SKU JL-GLE-10553, Cat. No. JSS-352/076): analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Soluble starch, analytical reagent, 200 g.
View Details
Sodium Hydrogen Carbonate (SKU JL-GLE-10556, Cat. No. JSS-358/079): sodium bicarbonate, analytical reagent, 100 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium hydrogen carbonate, analytical reagent, 100 g.
View Details
Economical student spectrometer for measuring the angle of a prism by the law of reflection and, with a diffraction grating, for demonstrating diffraction and measuring the wavelengths of monochromatic light sources.
Note: Student spectrometer for prism-angle measurement and diffraction-grating wavelength work.
View Details
Self-contained power supply for operating 25 cm spectrum tubes. The tube sits recessed for protection and is held in mounting clips; an on/off switch controls the unit, which is designed to extend spectrum tube life.
Note: Self-contained power supply for 25 cm gas spectrum tubes, with recessed tube mounting and on/off switch.
View Details
Solution Fehling A (SKU JL-GLE-10567, Cat. No. JSS-374/087): Fehling solution A, analytical reagent, 250 ml, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Fehling solution A, analytical reagent, 250 ml.
View Details
Solution Fehling B (SKU JL-GLE-10569, Cat. No. JSS-374/087): Fehling solution B, analytical reagent, 250 ml, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Fehling solution B, analytical reagent, 250 ml.
View Details.jpg)
Sodium Tetraborate (Borax) (SKU JL-GLE-10574, Cat. No. JSS-382/091): analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium tetraborate (borax), analytical reagent, 200 g.
View Details
Sodium Citrate (SKU JL-GLE-10579, Cat. No. JSS-388/094): analytical reagent, 100 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium citrate, analytical reagent, 100 g.
View Details
Wheeled science carts (dynamics trolleys) for motion, force and collision practicals on a bench or track. Cart size, wheels, mass and the number of carts per set are confirmed on the quotation.
Note: Wheeled carts for motion and collision practicals; specification confirmed on the quotation.
View Details
Set of five Hooke's law springs with different constants, for use with a Hooke's law apparatus; each stretches 2 cm under 0.5 N, 1 N, 2 N, 3 N or 5 N respectively. Loop for the support rod, hook for the load and adjustable red position arrow.
Note: Five Hooke's law springs rated 0.5 to 5 N per 2 cm, with hooks and red position arrows.
View Details
Skeletal Muscle, Longitudinal and Transverse Incisions (sections) (SKU JL-GLE-10599, Cat. No. JSS-411/0105): slide on coloured borosilicate glass, in a white rectangular plastic box; listed size 25.4 x 76.2 mm. Supplied by JaincoLab.
Note: Skeletal muscle slide, longitudinal and transverse sections.
View Details
Stress and strain apparatus for load-extension practicals: stress, strain, elastic limit and Young's modulus. Specimen type, load range and extension measurement are confirmed on the quotation.
Note: Stress and strain apparatus for Young's modulus practicals; configuration confirmed on the quotation.
View Details
Stained Human Blood (SKU JL-GLE-10602, Cat. No. JSS-413/0106): slide on coloured borosilicate glass, in a white rectangular plastic box; listed size 25.4 x 76.2 mm. Supplied by JaincoLab.
Note: Stained human blood slide in a plastic box.
View Details
Stained Frog Blood (SKU JL-GLE-10603, Cat. No. JSS-415/0107): slide on coloured borosilicate glass, in a white rectangular plastic box; listed size 25.4 x 76.2 mm. Supplied by JaincoLab.
Note: Stained frog blood slide in a plastic box.
View Details
Signal generator for physics and electronics practicals: produces repeating electrical waveforms at adjustable frequency and amplitude. Frequency range, waveforms and output are confirmed on the quotation.
Note: Signal generator for physics and electronics practicals; range and waveforms confirmed on the quotation.
View Details
Electrostatics kit: gold-leaf electroscope with top plate and hook electrode, gold leaves, 4 metallised polystyrene spheres, nylon thread, 2 polythene plates, electrophorus, proof plane, 2 aluminium calorimeters, polythene strip with wool rubber, stirrup.
Note: Static electricity kit with gold-leaf electroscope, electrophorus, proof plane and charging materials.
View Details
Solenoid for magnetic field practicals: 370 mm long, 50 mm diameter, 270 turns of 1.25 mm wire, maximum current 6 A, power supply connected through two safety sockets.
Note: 370 mm solenoid, 50 mm diameter, 270 turns, rated to 6 A.
View Details
Simplified Nucleotide Models for Students (SKU JL-GLE-10677, Cat. No. JSS-259/0150): simplified nucleotide models in dyed PVC with mountable parts.
Note: Simplified PVC nucleotide models with mountable parts.
View Details
Small 12 V DC solenoid air valve for pneumatic and vacuum lines: three ports, all 5.5 mm, operating temperature -10 to 60ยฐC.
Note: 12 V DC three-port solenoid air valve, 5.5 mm ports, for vacuum lines.
View Details
Compact three-port air valve operated by a 12 V DC solenoid, for vacuum and other pneumatic circuits; 5.5 mm ports, rated -10 to 60ยฐC.
Note: Compact 12 V DC solenoid-operated air valve with three 5.5 mm ports.
View Details
Solar cell demonstration of electrical energy produced directly from light, used with a small low-consumption mounted motor (16 mm pulley) that can lift at least 4 g; listed size 4 x 3 x 1.3 in.
Note: Solar cell for light-to-electricity demonstrations with a low-consumption mounted motor.
View Details
Sex Cell Reproduction - Meiosis chart (SKU JL-GLE-10710, Cat. No. JSS-307/0174): laminated wall-mounted biology chart on meiosis, the division that forms sex cells, 70 x 100 cm, for laboratories and classrooms.
Note: Laminated meiosis wall chart, 70 x 100 cm.
View Details
Circuit switch held in place by a screw-on ring for panel or board mounting, with a bevelled front. Contact rating and switch type are confirmed on the quotation.
Note: Panel-mount circuit switch with screw-on ring.
View Details
Pear-shaped separating funnel, 250 ml, transparent borosilicate glass, overall height 290 mm, stem diameter 11 mm; for separating immiscible liquids.
Note: 250 ml pear-shaped borosilicate separating funnel, 290 mm high.
View Details
Suspension clamp for holding a thermometer or specimen over a hotplate; keeps the object 110 mm from the stand rod, and the hook can be set to any angle.
Note: Suspension clamp, 110 mm reach, hook adjustable to any angle.
View Details
Closed support ring, 7.5 cm inner diameter, plated mild steel, on an 8 mm stem with open boss and thumb-screw for rods of 8 to 12.5 mm; 14 cm from rod centre to ring centre.
Note: 7.5 cm plated steel support ring, boss for 8-12.5 mm rods.
View Details.jpg)
Polished stainless steel spatula, 20 cm long, with one flat end and one spoon end; heat and chemical resistant; for transferring and scooping solid chemicals.
Note: 20 cm stainless steel spatula, flat and spoon ends.
View Details
Abrasive sand paper for laboratory and workshop use, such as cleaning wire ends and metal strips before experiments; grit, sheet size and pack quantity confirmed on the quotation.
Note: Sand paper for cleaning wires and metals; grit and size confirmed on the quotation.
View Details
Chemistry kit of three experiments relating the mole concept to balancing equations, covering reaction types and mole ratios; materials for 24 students in 4 groups of 6.
Note: Stoichiometry kit: 3 experiments, materials for 24 students in 4 groups.
View Details
Series of Microscopic Preparation for the Construction of Plant (SKU JL-GLE-10870, Cat. No. JSS-140/1.16): series of 10 coloured prepared glass slides on plant and algal structure, labelled with scientific names. Supplied by JaincoLab.
Note: Series of 10 coloured prepared slides on plant structure, labelled with scientific names.
View Details
Series of Microscopic Preparation for Human Histology (SKU JL-GLE-10872, Cat. No. JSS-144/1.17): series of 10 coloured prepared glass slides of human tissues, labelled with scientific names, for grade 6 and 7 biology. Supplied by JaincoLab.
Note: Series of 10 coloured prepared slides of human tissues.
View Details
Series of Microscopic Preparation for Micro Organism (SKU JL-GLE-10873, Cat. No. JSS-147/1.18): series of 10 coloured prepared glass slides of micro-organisms, labelled with scientific names, for grade 7 and 9 biology. Supplied by JaincoLab.
Note: Series of 10 coloured prepared slides of micro-organisms.
View Details
Series of Teaching Model in Relief for Biology 6-7-8 (SKU JL-GLE-10882, Cat. No. JSS-185/1.27): series of 10 one-sided relief charts, 50 x 70 cm, in non-toxic plastic, on human body systems, reproduction and embryo development.
Note: Series of 10 plastic relief charts, 50 x 70 cm, on human biology.
View Details
Series of Teaching Model in Relief for Biology 7.B32 (SKU JL-GLE-10883, Cat. No. JSS-189/1.28): series of 10 one-sided relief charts, 50 x 70 cm, in plastic with non-toxic colours, on invertebrate and vertebrate groups.
Note: Series of 10 plastic relief charts, 50 x 70 cm, on animal groups.
View Details
Series of Teaching Boards for Health Education, Environmental Protection (SKU JL-GLE-10888, Cat. No. JSS-209/1.33): 10 one-sided laminated charts, 70 x 100 cm, on pollution, AIDS, drugs, alcohol and smoking, with Albanian text.
Note: Series of 10 laminated health and environment charts, 70 x 100 cm.
View Details
Simple Kipp Appliances (SKU JL-GLE-10890, Cat. No. JSS-504/02): simple gas generator built on the principle of the classic Kipp apparatus, for preparing gases such as carbon dioxide, hydrogen and hydrogen sulphide without heating.
Note: Simple Kipp-principle gas generator; size confirmed on the quotation.
View Details
Simple devices for studying the properties of substances (SKU JL-GLE-10893, Cat. No. JSS-855/06): 18 mm test tube, 150-160 mm long, with an L-shaped glass tube of 6-8 mm outer diameter and a one-hole rubber stopper.
Note: Test tube with L-shaped glass tube and one-hole rubber stopper.
View Details
Simple gas appliances that do not dissolve in water (SKU JL-GLE-10894, Cat. No. JSS-155/07): 18 mm x 160 mm glass test tube with a Z-shaped glass tube of 6-8 mm outer diameter and a one-hole rubber stopper, for gases that do not dissolve in water.
Note: Test tube with Z-shaped glass tube and one-hole stopper, for water-insoluble gases.
View Details
Simple appliances for cooking gases lighter than air (SKU JL-GLE-10895, Cat. No. JSS-988/09): 18 mm glass test tube, 160 mm long, with a straight glass tube of 8 mm outer diameter and a one-hole rubber stopper, for gases lighter than air.
Note: Test tube with straight glass tube and one-hole stopper, for gases lighter than air.
View Details
Simple Gas Combustion Equipment (SKU JL-GLE-10896, Cat. No. JSS-411/010): 18 mm glass test tube, 160 mm long, with a glass tube of 8 mm outer diameter and a one-hole rubber stopper, for simple gas combustion experiments.
Note: Test tube, 8 mm glass tube and one-hole stopper for gas combustion experiments.
View Details
Semi-Analytical Chemical Scales (SKU JL-GLE-10899, Cat. No. JSS-855/014): die-cast aluminium balance, 200 g, 100 mg sensitivity as listed, piece counting, percent weighing and density modes, with small weights. Supplied by JaincoLab.
Note: Semi-analytical balance, 200 g, with piece counting, percent and density modes and small weights.
View Details
Spoons for Burning (deflagrating spoon) (SKU JL-GLE-10911, Cat. No. JSS-291/027): small hemispherical cup on a long wire, for burning substances in gas jars; wire length and cup size as listed, confirmed on the quotation.
Note: Deflagrating spoon for burning substances in gas jars.
View Details
Spoons for Substances (SKU JL-GLE-10912, Cat. No. JSS-859/028): polished stainless steel spoon for taking chemicals and substances, 130 mm total length, chemical and rust resistant.
Note: Polished stainless steel chemical spoon, 130 mm.
View Details
Spoon- shoulder (spoon spatula) (SKU JL-GLE-10922, Cat. No. JSS-325/039): white porcelain spoon spatula, 120 mm long, chemical resistant, for handling chemicals in the laboratory. Supplied by JaincoLab.
Note: White porcelain spoon spatula, 120 mm.
View Details
Some Glass (SKU JL-GLE-10945, Cat. No. JSS-933/064): conical borosilicate glass funnel, 75 mm diameter, with a short stem; heat and chemical resistant, for filtration and liquid transfer in school and college labs.
Note: Conical borosilicate glass funnel, 75 mm diameter, short stem.
View Details.jpg)
Separating Funnel (Separator) (SKU JL-GLE-10946, Cat. No. JSS-153/065): 125 ml separating funnel in clear borosilicate glass, with stopcock and stopper; heat and chemical resistant, for separating immiscible liquids.
Note: 125 ml borosilicate glass separating funnel with stopcock and stopper.
View Details
Signs of Danger of Chemicals (SKU JL-GLE-10988, Cat. No. JSS-984/107): laminated wall-mounted chart on the danger signs used for chemicals, 70 x 100 cm, for classrooms and laboratories.
Note: Laminated chemical danger signs wall chart, 70 x 100 cm.
View Details
Symbols of Chemical Elements (SKU JL-GLE-10991, Cat. No. JSS-907/110): laminated wall-mounted chart on the symbols of the chemical elements, 70 x 100 cm, for classrooms and laboratories.
Note: Laminated chemical element symbols wall chart, 70 x 100 cm.
View Details
Solubility of Chemicals in Water (SKU JL-GLE-10997, Cat. No. JSS-322/116): laminated wall-mounted chart on the solubility of chemicals in water, 140 x 100 cm, for classrooms and laboratories.
Note: Laminated solubility in water wall chart, 140 x 100 cm.
View Details
Sulfuric Acid 98% (SKU JL-GLE-11003, Cat. No. JSS-913/122): H2SO4 98%, analytical reagent, 1 litre, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sulfuric acid 98%, analytical reagent, 1 litre, with MSDS.
View Details
Sodium Hydroxide (SKU JL-GLE-11014, Cat. No. JSS-440/133): NaOH, analytical reagent, 500 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium hydroxide, analytical reagent, 500 g, with MSDS.
View Details
Sodium Hydro Carbonate (SKU JL-GLE-11015, Cat. No. JSS-144/134): sodium hydrogen carbonate (NaHCO3), analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium hydrogen carbonate, analytical reagent, 200 g, with MSDS.
View Details
Sodium Carbonate (SKU JL-GLE-11019, Cat. No. JSS-582/138): Na2CO3, analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium carbonate, analytical reagent, 200 g, with MSDS.
View Details.jpg)
Sodium Chloride (or Potassium Chloride) (SKU JL-GLE-11025, Cat. No. JSS-785/144): analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years; which salt is supplied is confirmed on the quotation. Supplied by JaincoLab.
Note: Sodium chloride or potassium chloride, analytical reagent, 200 g, with MSDS.
View Details
Sodium Metallic (SKU JL-GLE-11034, Cat. No. JSS-229/153): sodium metal, analytical reagent, 25 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium metal, analytical reagent, 25 g, with MSDS.
View Details
Silver Nitrate (SKU JL-GLE-11035, Cat. No. JSS-234/154): AgNO3, analytical reagent, 250 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Silver nitrate, analytical reagent, 250 g, with MSDS.
View Details.jpg)
Sulphur (Powder) (SKU JL-GLE-11046, Cat. No. JSS-556/165): sulphur powder, analytical reagent, 100 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sulphur powder, analytical reagent, 100 g, with MSDS.
View Details
Sodium Ethanoate (SKU JL-GLE-11048, Cat. No. JSS-400/167): sodium ethanoate (sodium acetate), analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium ethanoate (sodium acetate), analytical reagent, 200 g, with MSDS.
View Details
Sodium Sulfate (SKU JL-GLE-11053, Cat. No. JSS-430/172): Na2SO4, analytical reagent, 200 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium sulfate, analytical reagent, 200 g, with MSDS.
View Details
Sodium Thiosulfate (SKU JL-GLE-11055, Cat. No. JSS-415/174): Na2S2O3, analytical reagent, 100 g, supplied with MSDS; listed expiry 5 years. Supplied by JaincoLab.
Note: Sodium thiosulfate, analytical reagent, 100 g, with MSDS.
View DetailsSodium Thiosulfate (SKU JL-GLE-11056, Cat. No. JSS-415/174): sodium thiosulphate, analytical reagent, 100 g, supplied with MSDS; listed expiry 5 years; same data as JL-GLE-11055. Supplied by JaincoLab.
Note: Sodium thiosulphate, analytical reagent, 100 g, with MSDS.
View Details
Starch of analytical reagent grade for the iodine test, amylase digestion experiments and food tests. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent starch with MSDS, listed shelf life 5 years.
View Details
Flat strips of different metals for comparing metals in chemistry practicals. The name lists zinc, copper, iron, aluminium and lead; the exact set and strip size are confirmed on the quotation.
Note: Flat metal strips (zinc, copper, iron, aluminium and lead) for comparing metals.
View Details
Sodium carbonate (Na2CO3) of analytical reagent grade for acid-base titrations and carbonate tests in chemistry practicals. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium carbonate supplied with MSDS; listed shelf life 5 years.
View Details
Stearic acid of analytical reagent grade, a waxy saturated fatty acid, for melting and freezing point experiments and soap-making practicals. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent stearic acid supplied with MSDS; listed shelf life 5 years.
View Details
Sulphuric acid of analytical reagent grade for titrations, hydrogen preparation, esterification and dehydration practicals. Supplied with MSDS; listed shelf life 5 years. Strength confirmed on the quotation.
Note: Analytical reagent sulphuric acid supplied with MSDS; strength confirmed on the quotation.
View Details
Sodium hydroxide solution of analytical reagent grade, a strong alkali for acid-base titrations, cation precipitation tests and saponification. Supplied with MSDS. Concentration confirmed on the quotation.
Note: Analytical reagent sodium hydroxide solution supplied with MSDS; concentration confirmed on the quotation.
View Details
Sodium chloride of analytical reagent grade for crystallisation, flame tests, conductivity and electrolysis practicals and for preparing saline solutions. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium chloride supplied with MSDS; listed shelf life 5 years.
View Details
Sulphur of analytical reagent grade, a yellow non-metal, for burning-in-air, allotropy and iron-sulphur compound practicals. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sulphur supplied with MSDS; listed shelf life 5 years.
View Details
Silver nitrate of analytical reagent grade for halide tests, preparing Tollens reagent and chloride titrations. Supplied with MSDS; listed shelf life 5 years. Light-sensitive; kept in dark bottles.
Note: Analytical reagent silver nitrate supplied with MSDS; listed shelf life 5 years.
View Details
Sodium nitrite of analytical reagent grade for diazotising aromatic amines in azo dye practicals and for nitrite tests. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium nitrite supplied with MSDS; listed shelf life 5 years.
View Details
Silica gel of analytical reagent grade, a porous desiccant for desiccators and an adsorbent for chromatography. Supplied with MSDS; listed shelf life 5 years. Type and particle size confirmed on the quotation.
Note: Analytical reagent silica gel supplied with MSDS; type and particle size confirmed on the quotation.
View Details
Set of transparent, rectangular polythene (polyethene) samples for lessons on polymers and plastics. Number of samples and sheet sizes are confirmed on the quotation.
Note: Transparent rectangular polythene samples for polymer and plastics lessons.
View Details
Sodium bromide of analytical reagent grade for bromide ion tests and halogen displacement practicals in chemistry. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium bromide supplied with MSDS; listed shelf life 5 years.
View Details
Sodium iodide of analytical reagent grade for iodide ion tests, halogen displacement and the Finkelstein halogen-exchange reaction in organic chemistry. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium iodide supplied with MSDS; listed shelf life 5 years.
View Details
Sodium thiosulphate (hypo) of analytical reagent grade for iodometric titrations and the thiosulphate-acid rate of reaction experiment. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium thiosulphate supplied with MSDS; listed shelf life 5 years.
View Details
Sodium carbonate of analytical reagent grade, Model No. JL637/0138, for standard solutions in acid titrations and for carbonate tests. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent sodium carbonate, Model No. JL637/0138, supplied with MSDS.
View Details
Safranin dye of analytical reagent grade, a red stain used as the counterstain in Gram staining and to stain lignified tissues in plant sections. Supplied with MSDS; listed shelf life 5 years.
Note: Analytical reagent safranin dye supplied with MSDS; listed shelf life 5 years.
View Details
Set of Dynamometers (SKU JL-GLE-11214, Cat. No. JSS-385/08): six tubular acrylic spring balances with dual scales in grams and newtons, colour coded from 250 g / 2.5 N to 5 kg / 50 N, zero adjustment, steel loop and hook.
Note: Set of six dual-scale spring balances (dynamometers), 2.5 N to 50 N.
View Details
Sonometers (SKU JL-GLE-11232, Cat. No. JSS-347/030): wooden sonometer 110 x 10 x 8.5 cm with 60 cm resonance box, scale, dynamometer, two 0.4 mm and one 0.8 mm steel wires, 3 movable bridges, 500 g weights and 512/480/440 Hz tuning forks.
Note: Wooden sonometer with steel wires, movable bridges, weights and tuning forks.
View Details
Slope Plane Body Demonstration Apparatus (SKU JL-GLE-11249, Cat. No. JSS-281/010): sloping wooden plane with spring scales for bodies (listed as 500 mg / 10 mg / 5 g) and a reel of thread, for demonstrating the motion of a body on a slope.
Note: Inclined plane apparatus with wooden plane, spring scales and thread.
View Details
Set of Dynamometers (SKU JL-GLE-11251, Cat. No. JSS-277/012): six acrylic tubular spring balances with dual gram/newton scales, top zero adjustment, stainless steel loop and hook: 2.5, 5, 10, 20, 30 and 50 N, colour coded.
Note: Set of six dual-scale spring balances from 2.5 N to 50 N.
View Details
Sonometers (SKU JL-GLE-11264, Cat. No. JSS-223/040): wooden sonometer 110 x 10 x 8.5 cm, resonance box 60 cm with scale, two 0.4 mm and one 0.8 mm steel wires, three movable bridges, dynamometer, weights, tuning forks 512, 480 and 440 Hz.
Note: Wooden sonometer for the laws of vibrating strings, with tuning forks.
View Details
Lightweight polycarbonate safety goggles with high-wrap lens, side protection and adjustable arms, standard unisex size, for laboratory, workshop and outdoor use.
Note: Polycarbonate wrap-around safety goggles with side protection and adjustable arms.
View Details
Flexible-frame safety spectacles with a high-wrap lens, side protection and adjustable arms, lightweight and unisex, for use indoors or outdoors.
Note: Flexible, lightweight safety spectacles with side protection.
View Details
Classroom activity with simulated blood and antisera for typing four samples by the ABO and Rh systems; materials for 10 groups, teacher manual and reproducible student study guide masters.
Note: Simulated blood typing activity for 10 student groups, with teacher manual.
View Details
250 ml transparent glass sample bottle with screw cap, also listed as a respiration bottle, for holding samples and for closed-vessel respiration experiments.
Note: 250 ml clear glass bottle with screw cap, used as a sample or respiration bottle.
View Details
Disposable 1 ml plastic hypodermic syringe for laboratory use, such as measuring and dispensing small volumes of liquid in practicals.
Note: Disposable 1 ml plastic syringe for laboratory use.
View Details
Single-use 5 ml plastic hypodermic syringe listed for laboratory use, for drawing up and dispensing measured volumes of liquid and for gas-collection set-ups.
Note: Single-use 5 ml plastic syringe for laboratory work.
View Details
Spirometer sensor for physiology practicals: students measure airflow, pressure, duration and lung volume during breathing in and out, using disposable mouthpieces. For teaching use only.
Note: Teaching spirometer sensor for airflow and lung volume, with disposable mouthpieces.
View Details
Disposable 10 ml plastic hypodermic syringe for laboratory use: drawing up, transferring and dispensing measured volumes of liquid in practicals.
Note: Disposable 10 ml plastic syringe for laboratory use.
View Details
Large 30 ml disposable plastic hypodermic syringe listed for laboratory use, for transferring larger measured volumes and for gas-volume experiments.
Note: Disposable 30 ml plastic syringe for laboratory use.
View Details
Spring balance with 500 g capacity: rectangular plastic body, metal scale in grams and newtons, zero adjuster, suspension ring and load hook. Newton range confirmed on the quotation.
Note: 500 g spring balance with gram and newton scale and zero adjuster.
View Details
Sound sensor measuring sound pressure level in decibels (dBA), for noise surveys and sound experiments with a data logger in school physics and environmental science.
Note: Sound level sensor reading in dBA.
View Details
Spring balance, 1000 g / 10 N, with rectangular plastic body, metal scale in grams and newtons, zero adjuster, suspension ring and load hook.
Note: 1000 g / 10 N spring balance with zero adjuster.
View Details
Stroboscope flashing at 100 to 10,000 flashes per minute, rate shown on a four-digit LED display, crystal-controlled rate accuracy of ยฑ (0.05 % + 1 digit), built-in handle and 6 ft power cord.
Note: Crystal-controlled stroboscope, 100-10,000 flashes per minute, with LED rate display.
View Details
Silica gel, 500 g pack, analytical reagent grade. Supplied with a material safety data sheet (MSDS); stated shelf life 5 years.
Note: Silica gel in a 500 g analytical reagent pack, supplied with MSDS.
View Details
Stainless steel threaded rod, 100 cm long and 12 mm in diameter (listed size 10 x 1.5 mm), silver finish and chemical resistant, for building laboratory stands and apparatus supports.
Note: Stainless steel threaded rod, 100 cm x 12 mm, for laboratory stands and supports.
View Details
String vibrator for mechanical wave practicals: wave speed, frequency, wavelength, amplitude, interference and resonance on a string. No motor or speaker; clamps to a table or a lab rod. Supplied by JaincoLab.
Note: String vibrator for studying waves on a string; mounts on a table with a C-clamp or on a lab rod.
View Details
Student Balance listed as a 120 kg platform scale: range 1275 N x 5 N, 240 x 240 mm stainless steel platform, red LED display, 24-bit ADC, counting and memory accumulation, 230 V mains with battery. Supplied by JaincoLab.
Note: 120 kg platform scale (1275 N x 5 N) with stainless steel platform, red LED display and counting function.
View Details
Sample container of 100 ml in graduated polythene; chemical resistant, for collecting, storing and carrying laboratory samples. Supplied by JaincoLab.
Note: 100 ml graduated polythene sample container.
View Details
Graduated 50 ml sample container in chemical resistant polythene, for small laboratory samples of liquids, soils and specimens. Supplied by JaincoLab.
Note: 50 ml graduated polythene sample container.
View Details
Scalpel handles in silver stainless steel, heat and chemical resistant, for fitting replaceable scalpel blades in dissection and specimen preparation. Supplied by JaincoLab.
Note: Stainless steel scalpel handles, heat and chemical resistant.
View Details
Sharps container for disposing of needles, syringes and scalpel blades: puncture-proof, robust yellow body, red lid that locks and can be reopened or sealed permanently, needle stripping aid; odour and leak-proof once sealed. Supplied by JaincoLab.
Note: Puncture-proof yellow sharps container with lockable red lid and needle stripping aid.
View Details
Smart Cart in blue: a wireless dynamics cart with an ABS body, low-friction wheels and built-in sensors for force, position, velocity and acceleration; sends data over Bluetooth, on or off a track. Supplied by JaincoLab.
Note: Blue wireless dynamics cart with built-in force, position, velocity and acceleration sensors and Bluetooth.
View Details
Red Smart Cart for mechanics practicals: ABS body on low-friction wheels with built-in force, position, velocity and acceleration sensors, streaming data by Bluetooth with or without a track. Supplied by JaincoLab.
Note: Red Smart Cart: sensor dynamics cart with Bluetooth data, force, position, velocity and acceleration.
View Details
Charging garage for Smart Carts: charges up to five carts at once and stores the carts and their accessory bumpers; a power adapter is included. Supplied by JaincoLab.
Note: Charges up to five Smart Carts at once and stores carts and bumpers; power adapter included.
View Details
Smart Fan with an aluminium body, controlled from an app or with buttons and easily operated remotely; listed for indoor use. Supplied by JaincoLab.
Note: Aluminium fan with app and button control, remote operation, for indoor use.
View Details
Chattaway-pattern laboratory spatula in silver stainless steel, 10 cm long, heat and chemical resistant, for transferring small amounts of solid chemicals and powders.
Note: 10 cm stainless steel Chattaway spatula, heat and chemical resistant.
View Details
Prepared microscope slide for the study of spermatogenesis, on clear borosilicate glass, kept in a white rectangular plastic box, for biology practicals. Supplied by JaincoLab.
Note: Prepared spermatogenesis slide on borosilicate glass, in a white plastic box.
View Details
Spiro Meter sensor for respiratory measurements at rest and during moderate activity, with a differential pressure transducer and a removable flow head (22 mm ID, 30 mm OD) for cleaning and sterilising. Supplied by JaincoLab.
Note: Spirometer sensor with differential pressure transducer and removable 22 mm ID flow head.
View Details
Sure Bonder safety gloves in grey, full-finger style, listed with heat resistance and chemical resistance, for hand protection in laboratory and workshop work. Supplied by JaincoLab.
Note: Grey full-finger Sure Bonder safety gloves, listed as heat and chemical resistant.
View Details
Stem model showing the cross section of the tissue structure of a garden bean dicotyledonous stem, magnified 200 times; mounted on a base, 45 x 40 x 22 cm.
Note: Garden bean dicot stem cross section, 200 times magnified, on base, 45 x 40 x 22 cm.
View Details
Micro spatula in silver stainless steel, heat and chemical resistant, for taking very small quantities of solid chemicals and powders.
Note: Stainless steel micro spatula, heat and chemical resistant.
View Details
Adapter for mounting a Smart Cart on a laboratory rod stand; fit and fixing details are confirmed on the quotation. Supplied by JaincoLab.
Note: Rod stand adapter for the Smart Cart.
View Details
Polypropylene sample container, 30 ml, chemical resistant, for small laboratory samples. Supplied by JaincoLab.
Note: 30 ml polypropylene sample container.
View Details
60 ml polypropylene sample container, chemical resistant, for laboratory samples. Supplied by JaincoLab.
Note: 60 ml polypropylene sample container.
View Details
120 ml polypropylene sample container, chemical resistant, for larger laboratory samples. Supplied by JaincoLab.
Note: 120 ml polypropylene sample container.
View Details
Polythene spot plate with 12 wells for holding and observing small-scale reactions and spot tests; durable, easy to wash and reuse. Supplied by JaincoLab.
Note: Polythene 12-well spot plate, washable and reusable.
View Details
Durable polythene spot plate with 24 wells, for running and comparing many small-scale reactions at once; easy to wash and reuse. Supplied by JaincoLab.
Note: Polythene 24-well spot plate for small-scale reactions.
View Details
Stainless steel micro-spatula with a flat blade at one end and a micro-spoon at the other; chemical and heat resistant and non-magnetic, for handling small amounts of powders. Supplied by JaincoLab.
Note: Double-ended stainless steel micro-spatula, flat end and micro-spoon, non-magnetic.
View Details
Laboratory spatula with a raised centre, in polished, silver-coloured stainless steel, chemical resistant, for transferring solids. Supplied by JaincoLab.
Note: Polished stainless steel spatula with raised centre.
View Details
Double-ended stainless steel spatula with a scoop at one end and a flat blade at the other, polished to a silver mirror finish, chemical resistant. Supplied by JaincoLab.
Note: Stainless steel scoop and flat-end spatula, mirror finish.
View Details
Three-dimensional solar system model with planets in relative sizes and colours, set by month to show relative positions; 15 cm diameter sun on a sturdy base, outer planet 18 inches from the sun; illustrated study guide. Supplied by JaincoLab.
Note: 3D solar system model, planets set by month, 15 cm sun, with study guide.
View Details
Strontium chloride, analytical reagent grade, 250 g pack, supplied with an MSDS and a stated shelf life of 5 years, for flame tests and other chemistry practicals. Supplied by JaincoLab.
Note: Strontium chloride, analytical reagent, 250 g, with MSDS.
View Details
Prepared microscope slide of leaf stomata on clear borosilicate glass, in a white plastic box, for studying stomata and guard cells in botany practicals. Supplied by JaincoLab.
Note: Prepared stomata slide.
View Details
Prepared transverse section (X.S) slides of skin on clear borosilicate glass, in a white plastic box, for identifying the epidermis, dermis and skin structures in histology practicals. Supplied by JaincoLab.
Note: Prepared skin transverse section slides.
View Details
Prepared whole-mount (W.M) slides of sperm cells on clear borosilicate glass, in a white plastic box, for identifying the head, middle piece and tail in reproduction practicals. Supplied by JaincoLab.
Note: Prepared whole-mount sperm slides.
View Details
Stackable, puncture-resistant sharps containers for needles, syringes and scalpel blades; autoclave-safe and incinerator-safe, with needle stripping aid and a lid that locks and can be sealed permanently; yellow body, red lid. Supplied by JaincoLab.
Note: Puncture-proof sharps containers with lockable lid, yellow body and red lid.
View Details
Plain glass microscope slides, clear and rectangular, with ground-glass edges, for preparing and viewing specimens in the laboratory. Supplied by JaincoLab; size and pack quantity are confirmed on the quotation.
Note: Clear rectangular glass microscope slides with ground edges.
View Details
Acoustic stethoscope with a diaphragm chest piece and an analogue watch (timepiece), for teaching auscultation and blood pressure measurement in nursing and physiology training. Supplied by JaincoLab.
Note: Stethoscope with diaphragm chest piece and analogue timepiece, for training use.
View Details
Simple distillation assembly in borosilicate glass with 19/26 interchangeable joints: 500 ml round bottom flask, still head with thermometer support, 300 mm Liebig condenser, receiver adaptor and 19/26 joint clips.
Note: Borosilicate simple distillation set-up, 19/26 joints, 500 ml flask, 300 mm Liebig condenser.
View Details
Fractional distillation assembly in borosilicate glass with 24/29 joints, a 250 ml round bottom flask and a Vigreux column, for separating liquids with close boiling points in chemistry practicals.
Note: Borosilicate fractional distillation set-up, 24/29 joints, 250 ml flask, Vigreux column.
View Details
Spring Dynamometer Balance Scale Forcemeter (SKU JL-LEP-11602): plastic and metal forcemeter with fatigue-resistant spring, pointer, regulator, hook, pressure table and high-resolution scale, for force and weight experiments.
Note: Made as per DepEd guidelines. Light to carry and easy to operate.
View Details
Solenoid (SKU JL-LEP-11618): wound copper-wire coil with 120 turns, used to demonstrate the magnetic field of a current-carrying coil, make electromagnets and show induced current in physics practicals.
Note: Copper wire, 120 turns.
View Details
Spatula (SKU JL-LEP-11619): 15 cm stainless steel spatula with a spoon-shaped end and a flat end, chemical and heat resistant, for scooping and transferring solid chemicals in laboratory practicals.
Note: Stainless steel, 15 cm.
View Details
Stirring Rod (SKU JL-LEP-11620): borosilicate glass rod, 100 mm long and 6 mm diameter, chemical resistant, for stirring and mixing solutions and guiding liquid when pouring in laboratory practicals.
Note: Borosilicate glass, 100 x 6 mm.
View Details
Safety Goggles with Polycarbonate Lens (SKU JL-LEP-11652): compact, lightweight goggles, Cat. No. JSS-303/051, with a clear polycarbonate lens that is impact, scratch, liquid and dust resistant.
Note: Cat. No. JSS-303/051; clear polycarbonate lens.
View Details
Stand Burette (SKU JL-LEP-11653): 3 kg stainless steel stand with a chrome-plated rod, Cat. No. JSS-304/052, that holds clamps to support burettes, test tubes and flasks.
Note: Cat. No. JSS-304/052; weight 3 kg.
View Details
Steel with Plastic Pegs & Holes to Accept Test Tubes (SKU JL-LEP-11660): white painted stainless steel test tube rack with plastic pegs, Cat. No. JSS-322/059, for tubes up to 25 mm diameter.
Note: Cat. No. JSS-322/059; tubes up to 25 mm.
View Details
Syringe (SKU JL-LEP-11661): 20 ml disposable, single-use 3-part Luer slip syringe of non-toxic polypropylene, Cat. No. JSS-323/060, for measuring and transferring liquids in laboratory work.
Note: Cat. No. JSS-323/060; 20 ml, single use.
View Details
Standard Periodic Chart (SKU JL-LEP-11675): 1025 x 1285 mm periodic table chart, Cat. No. JSS-351/074, mounted on wooden rollers with a hanging cord, with a weather-proof, washable and markable surface.
Note: Cat. No. JSS-351/074; 1025 x 1285 mm.
View Details
Steel Electrode Rod Carbon (SKU JL-LEP-11688): round carbon electrode rod, 140 x 6 mm, Cat. No. JSS-381/087, for electrolysis, electroplating and simple cell experiments in school and college laboratories.
Note: Cat. No. JSS-381/087; 140 x 6 mm.
View Details.png)
Steel Electrode Rod Iron (SKU JL-LEP-11689): round iron electrode rod, 140 x 6 mm, Cat. No. JSS-383/088, for electrolysis, electroplating and simple cell experiments in school and college laboratories.
Note: Cat. No. JSS-383/088; 140 x 6 mm.
View Details
Steel Electrode Rod Zinc (SKU JL-LEP-11690): round zinc electrode rod, 140 x 6 mm, Cat. No. JSS-385/089, for electrolysis, electroplating and simple cell experiments in school and college laboratories.
Note: Cat. No. JSS-385/089; 140 x 6 mm.
View Details
Steel Electrode Rod copper (SKU JL-LEP-11691): round copper electrode rod, 140 x 6 mm, Cat. No. JSS-387/090, for electrolysis, electroplating and simple cell experiments in school and college laboratories.
Note: Cat. No. JSS-387/090; 140 x 6 mm.
View Details
Sphere -Polystyrene (SKU JL-LEP-11702): white, round polystyrene sphere of 25 mm diameter, Cat. No. JSS-411/101, for model making and science activities in schools and colleges.
Note: Cat. No. JSS-411/101; 25 mm diameter.
View Details
Stereoscope with Folding Steel Legs (SKU JL-LEP-11707): 70 mm stereoscope, Cat. No. JSS-423/106, with a 4.7 inch focal distance, supported on folding steel legs, for viewing stereo image pairs.
Note: Cat. No. JSS-423/106; 70 mm, 4.7 inch focal distance.
View Details
Shoulder Joint Model (SKU SCL-OM-12342): life-size PVC shoulder joint on a stand, 16 x 12.5 x 20 cm, with flexible artificial ligaments illustrating abduction, adduction, anteversion, retroversion and rotation.
Note: Life-size PVC shoulder joint on a stand with flexible ligaments. For teaching use only.
View Details
Slope Plane Body Demonstration Apparatus (SKU SCL-PLE-12352): sloping wooden plane with spring scales and thread for demonstrating the motion of a body and the forces on a slope.
Note: Wooden inclined plane with spring scales and thread. Sizes and scale ranges are confirmed on the quotation.
View Details
Set of Dynamometers (SKU SCL-PLE-12354): six colour-coded acrylic tubular spring balances from 250 g / 2.5 N to 5 kg / 50 N, dual gram and newton scales, zero adjustment, stainless steel loop and hook.
Note: Six ranges from 2.5 N to 50 N, colour coded. Each balance has dual gram and newton scales and zero adjustment.
View Details
Sonometer (SCL-PLE-12383): wooden instrument, 110 x 10 x 8.5 cm, with 60 cm resonance box and scale, dynamometer, two 0.4 mm and one 0.8 mm steel wires, three movable bridges, 500 g + 6 x 500 g weights and 512, 480 and 440 Hz tuning forks with hammer.
Note: Wooden sonometer with three steel wires, movable bridges, dynamometer, slotted weights and three tuning forks for the laws of vibrating strings.
View Details
Stains and Reagents for Microscopy (SKU SCL-BLE-12401): six 10 ml stains incl. methylene blue, eosin and Lugol's solution, plus ethyl alcohol, Canada balsam and oil. Supplied by JaincoLab.
Note: Six 10 ml microscopy stains with ethyl alcohol, Canada balsam and oil.
View Details
Sun-Earth-Moon Model (SKU SCL-LEP-12416): mechanical model with a set of gears that reproduces Earth and Moon movements to demonstrate seasons, day and night, moon cycles and solar and lunar eclipses.
Note: Geared mechanism.
View Details.jpg)
Supplementary Equipment Kit for General Chemistry Cabinets (C1 & C2 cabinets) (SKU SCL-LEP-12428): heating equipment, glassware, stand parts, bench tools and connection cables that complete the cabinets.
Note: For C1 and C2 cabinets; gas cartridge supply confirmed on quotation.
View Details
Safety goggles, polycarbonate (SCL-PLE-12434): lightweight protective eyewear with an impact-resistant high-wrap lens, side protection and adjustable arms, for indoor or outdoor use in laboratories and workshops.
Note: Polycarbonate safety eyewear with impact-resistant wrap lens, side protection and adjustable arms.
View Details
Set of 9 assorted paint brushes (SCL-PLE-12440) with synthetic hair and anti-rust ferrules, for acrylic, tempera, poster and watercolour paints in painting and craft projects. Brush sizes are confirmed on the quotation.
Note: Nine assorted synthetic-hair brushes with anti-rust ferrules for school painting and craft work; they hold their shape and are easy to clean.
View Details
Supplementary material kit (SCL-PLE-12447) for the BP1 Plants 1 biology set: pocket scale, double nut, aluminium universal stand, 29 cm support rod, and a consumables kit for approx. 60 runs of each experiment.
Note: Stand hardware, pocket scale and consumables (reagents, filter papers, bags, tea lights and more) for running the BP1 Plants 1 experiments about 60 times each.
View Details
Stan Skeleton (SKU SCL-PLE-12451): natural-size 176.5 cm human skeleton model in durable plastic, 9.5 kg, with 3-part magnetic skull, removable limbs, metal stand on 5 castors and a transparent dust cover. Supplied by JaincoLab.
Note: Stan-brand natural-size skeleton on a white metal stand with five castors, supplied by JaincoLab with a transparent dust cover.
View Details
Set of four acrylic demonstration triangles (SKU SCL-MK-12516): equilateral, isosceles, right-angled and obtuse-angled, 5 mm acrylic, each at least 10.16 cm, with angle and side markings and a fitted storage box.
Note: Four multicolour 5 mm acrylic triangles with angle marks and side-equality indicators. Supplied in a fitted storage box.
View Details
Acrylic skip counting board (SKU SCL-MK-12517), 29.5 x 29.5 cm, 0.3 cm acrylic, 50 numbered slots (1-50) in a 5 x 10 grid, with 25 colourful marbles for skip counting, times tables and number patterns.
Note: 29.5 x 29.5 cm acrylic board with 50 numbered slots. Supplied with 25 marbles.
View Details
Solar and lunar eclipse working model (SKU SCL-MK-12518) with a hand-crank rotating Moon, illuminated Sun and hinged panels that fold into a suitcase-style carry case, for classroom demonstrations and science exhibitions.
Note: Hand-crank working model showing both solar and lunar eclipses. Size and lamp power supply confirmed on the quotation.
View Details
Motorised solar system working model (SKU SCL-MK-12519): every planet revolves around an illuminated Sun and rotates on its own axis, with adjustable speed, marked orbits, a transparent gear panel and a wood and fibreboard base.
Note: Motorised model showing rotation and revolution of the planets. Size and power supply confirmed on the quotation.
View Details
Solar energy working model (SKU SCL-MK-12520): a 10 x 20 cm solar panel with adjustable angle powers a DC fan, LED lamp and buzzer through individual switches, on a wooden and fibreboard base, packed in a compartmented box.
Note: Working model with a 10 x 20 cm solar panel, DC fan, LED lamp and buzzer. Supplied in a compartmented box.
View Details
Wooden Soma cube puzzle (SKU SCL-MK-12521): seven polished pieces made from 27 connected unit cubes that form a 3 x 3 x 3 cube and other shapes, with an instruction manual, for spatial reasoning in maths labs.
Note: Seven-piece polished wooden Soma cube, 27 unit cubes in all. Instruction manual included.
View Details
Brass sound pipes set (SKU SCL-MK-12522): seven hollow polished brass pipes, 10 to 30 cm long and 1.2 cm outside diameter, freely suspended from a wooden frame on a non-slip base, with a soft-headed striker.
Note: Seven brass pipes, 10-30 cm, on a wooden frame. Soft-headed striker included.
View Details
Dual-head acoustic stethoscope (SKU SCL-MK-12523) with a rotating stainless-steel chestpiece, diaphragm and open bell, single tube, aluminium binaural ear tubes and soft-sealing eartips, for nursing and medical training.
Note: Single-tube acoustic stethoscope with a rotating dual-head stainless-steel chestpiece. For teaching and training use.
View Details
Solar boat (SCL-MLI-12536): working model boat with an 8 mm EVA foam hull and a 3 V 200 mA solar panel driving a 3 V DC motor and shaft-mounted propeller, connected with crocodile clips.
Note: Solar-powered model boat with 3 V panel, motor and propeller.
View Details
See saw water pump (SCL-MLI-12537): working pump model in which a wooden see-saw drives two 3 ml syringe plungers to move water from a clear cuboid reservoir through transparent tubing, with no power needed.
Note: Wooden see-saw water pump model with two syringes and a clear reservoir.
View DetailsSpinning nuts (SCL-MLI-12539): manual physics model with three loose metal nuts on a 12 in diameter ring of 3 mm metal rod, for demonstrating circular motion, inertia and the forces in rotation.
Note: Three metal nuts on a 12 in metal ring for circular motion demonstrations.
View Details
Stoppers for cycle spoke (SKU SCL-CE-12540): small circular lightweight plastic caps that push onto compatible bicycle spoke ends, packed 50 to a pack. Spoke diameter fit is confirmed on the quotation. Supplied by JaincoLab.
Note: Small circular plastic caps; push-fit onto compatible spoke ends; pack of 50.
View Details
Spider acrylic robotic kit (SKU SCL-MK-12564): programmable four-legged robot with orange acrylic body, servo-driven articulated legs and ultrasonic sensor eyes, for walking-robot and coding projects.
Note: Four-legged programmable spider robot with servo-driven legs. Servo count and controller model confirmed on the quotation.
View Details
STEM Lab Installation Service (SKU SCL-SK-12571): planning, supply and installation of a STEM lab: robotics, coding, electronics and engineering workstations, programmable project kits, 3D printers, working models. Supplied by JaincoLab.
Note: STEM lab planning and installation; scope confirmed on the quotation.
View Details
Science Wonders STEM Activity Box (SKU SCL-MK-12581): hands-on kit for building and testing models with electric circuits, fan motors, wheels, pulleys, balance, motion and planetary models, in a carry box.
Note: Hands-on STEM activity box with electrical, mechanical and energy activities. Itemised contents confirmed on the quotation.
View Details
School Welcome Kit (SKU SCL-SK-12584): starter kit for young learners with lined, plain and activity notebooks, story and picture books, pencils, crayons, coloured pencils, sketch pens, ruler, eraser, sharpener. Supplied by JaincoLab.
Note: School welcome kit; contents adjustable by age group and confirmed on the quotation.
View Details











