Gear Pump Demonstration Unit Manufacturer,Supplier and Exporter in India
Product Code : JA-FMAHLE-9970
The Gear Pump Demonstration Unit (SKU JA-FMAHLE-9970) is a small-scale positive displacement pump set-up for producing the characteristic curves of a gear pump. A motor-driven gear pump with a clear acrylic head and reservoir circulates water continuously on a stainless steel plinth, and electronic sensors measure outlet pressure, flow rate and water temperature. JaincoLab supplies this gear pump demonstration unit to engineering colleges and polytechnics for hydraulic machines practicals.
Specifications
The listed ratings are a maximum flow of 6.5 litres per minute (typical), a 250 W motor, a maximum head of 25 m and a maximum pump speed of 1800 rpm; a manual outlet valve controls the flow and a pressure relief valve is fitted.
| Product | Gear Pump Demonstration Unit |
| SKU | JA-FMAHLE-9970 |
| Max. flow rate | 6.5 l/min typical |
| Motor power | 250 W |
| Max. head | 25 m |
| Max. pump speed | 1800 rpm |
| Pump head and reservoir | Clear acrylic |
| Valves | Manual flow control valve at the outlet; pressure relief valve |
| Sensors | Pump outlet pressure, flow rate, water temperature |
| Computer link | PC link (computer not supplied); software with set-up and teaching instructions, data logging and graphs |
| Base | Stainless steel plinth with reservoir and pipework for continuous circulation |
Experiments on the gear pump demonstration unit
The gear pump demonstration unit is used to measure constant-speed pump performance and plot outlet pressure against shaft power, speed, efficiency, flow rate and volumetric efficiency, so students can compare a gear pump with centrifugal pumps in hydraulic machines practicals.
- Demonstrating a gear pump in operation
- Plotting outlet pressure against motor shaft power, pump speed and flow rate
- Determining pump efficiency and volumetric efficiency
- Comparing student calculations with the computer results
Scope of supply and ordering
The listing covers the gear pump demonstration unit with reservoir, valves, sensors and software. The computer is not supplied; any interface needed is confirmed on the quotation. Accessories, spares and quantities are confirmed on the quotation.
Minimum order quantity, lead time and packing are confirmed on each quotation for the number of units and the delivery destination. The unit is supplied by JaincoLab singly or with the other pump and fan demonstration units for colleges and tender orders.
Frequently asked questions
What are the pump ratings?
Maximum flow 6.5 l/min (typical), maximum head 25 m, maximum speed 1800 rpm, with a 250 W motor.
Which characteristic curves can be produced?
Outlet pressure against motor shaft power, pump speed, pump efficiency, flow rate and volumetric efficiency.
Can students see the gears?
Yes. The pump head and the water reservoir are made of clear acrylic.
Related products
- Plunger Pump Demonstration Unit
- Centrifugal Pump Demonstration Unit
- Series and Parallel Pumps Demonstration Unit
- Centrifugal Fan Demonstration Unit
Pump, fan and turbine demonstration units are listed in the JaincoLab fluid mechanics lab equipment range.
Request a quote
To order the Gear Pump Demonstration Unit, send the quantity and delivery destination through the JaincoLab contact page or email [email protected]. Buying under a laboratory tender? Use our tenders page.
