• +91-85699-09696

categories

Data Acquisition, Instrumentation and Process Control Manufacturer, Suppliers and Exporter in India

Jaincolab Manufacturers is a leading Data Acquisition, Instrumentation and Process Control Manufacturer, Supplier, and Exporter in India, United States, Indonesia, Brazil, Bangladesh, Mexico, Japan, Egypt, Philippines, Democratic Republic of the Congo, Vietnam, Iran, Turkey, Tanzania, United Kingdom, France, South Africa, Italy, Kenya, Colombia, Sudan, Uganda, South Korea, Argentina, Afghanistan, Yemen, Angola, Morocco, Poland, Uzbekistan, Mozambique, Malaysia, Ghana, Saudi Arabia, Peru, Madagascar, Côte d’Ivoire, Cameroon, Niger, Venezuela, Australia, Syria, Mali, Burkina Faso, Sri Lanka, Malawi, Zambia, Chad, Kazakhstan, Somalia, Chile, Senegal, Ecuador, Cambodia, Zimbabwe, Guinea, Benin, Rwanda, Burundi, Bolivia, South Sudan, Tunisia, Haiti, Belgium, Dominican Republic, Jordan, United Arab Emirates, Honduras, Tajikistan, Papua New Guinea, Portugal, Togo, Sierra Leone, Belarus, Laos, Turkmenistan, Libya, Kyrgyzstan, Nicaragua, Paraguay, Bulgaria, Serbia, Republic of the Congo, Lebanon, Liberia, Central African Republic, Palestine, Oman, Mauritania, New Zealand, Costa Rica, Kuwait, Panama, Croatia, Georgia, Eritrea, Mongolia, Uruguay, Qatar, Namibia, Bosnia and Herzegovina, Moldova, Armenia, Gambia, Jamaica, Lithuania, Albania, Gabon, Botswana, Lesotho, Guinea-Bissau, Slovenia, Equatorial Guinea, Latvia, North Macedonia, Bahrain, Trinidad and Tobago, Timor-Leste, Cyprus, Estonia, Eswatini, Mauritius, Djibouti, Fiji, Comoros, Solomon Islands, Guyana, Bhutan, Luxembourg, Suriname, Montenegro, Malta, Maldives, Cabo Verde, Brunei, Belize, Bahamas, Iceland, Vanuatu, Barbados, São Tomé and Príncipe, Samoa, Saint Lucia, Kiribati, Seychelles, Grenada, Saint Vincent and the Grenadines, Antigua and Barbuda.

Last updated: 19 November 2026

What is in the data acquisition, instrumentation and process control range?

This range has eight items for automation and process control courses. Four are PLC items: a PLC trainer and an industrial PLC panel built on the Siemens S7-1200 CPU 1214C, six application modules and a conveyor sorting trainer. Two are temperature and level process control trainers, and two are illuminated process panels. The range has no separate data acquisition unit.

Item groups in the process control range

GroupItemsWhat it covers
PLC trainingProgrammable Logic Controller Trainer (JA-DAIAPC-9610), Industrial PLC System (JA-DAIAPC-9611), Programmable Logic Controller Trainer Modular Application Modules (JA-DAIAPC-9612)A PLC trainer and an industrial PLC panel on the Siemens S7-1200 CPU 1214C, and six application modules that connect to the trainers
PLC applicationConveyor System Trainer (JA-DAIAPC-9613)Sorting items on a conveyor under PLC control
Process control loopsTemperature Process Control Trainer (JA-DAIAPC-9616), Level Process Control Trainer (JA-DAIAPC-9617)Temperature and level loops on vertical panels with large process diagrams: a 500 W water heating bench and a 5 L level tank with a 10 L sump
Illuminated process panelsIlluminated Process Panel for Steam Injection in Heavy Oil Production (JA-DAIAPC-9614), Illuminated Process Panel for Crude Palm Oil Production Simulation (JA-DAIAPC-9615)A1-size colour diagrams with LEDs that show the flow through an oil or palm oil process; electronic simulations only

PLC trainers and application units compared

Each item is listed with the details its product page gives. "Not listed" means the page does not state it.

ProductProduct codePLC or setInputs and outputsSoftware and connectionDocuments
Programmable Logic Controller TrainerJA-DAIAPC-9610Siemens SIMATIC S7-1200 CPU 1214C DC/DC/DC on a bench trainer panel14 digital inputs and 10 transistor outputs at 24 V DC; 2 analogue inputs, 0 to 10 VSTEP 7 Basic in TIA Portal; Ethernet cable to the PCStudent experiment manual
Industrial PLC SystemJA-DAIAPC-9611S7-1200 CPU 1214C with an SM 1234 analogue module and a 7-inch PROFINET HMI panel14 digital inputs, 10 digital outputs, 6 analogue inputs and 2 analogue outputsSTEP 7 (TIA Portal) and WinCC; software licence and programming PC as separate optionsNot listed
Programmable Logic Controller Trainer Modular Application ModulesJA-DAIAPC-9612Six interchangeable application modules, from motor start-stop to pneumatic cylinder sequencing24 V DC labelled control inputs and outputs; mains loads and actuators simulatedKeyed patch connectors to the PLC trainerOne exercise manual per module
Conveyor System TrainerJA-DAIAPC-9613Conveyor sorting trainer: 24 V DC belt, proximity, optical and colour sensors, three chutesNeeds about 7 to 14 digital inputs and 5 to 6 digital outputs on the PLC24 V DC inputs and outputs on sockets, terminals or a multi-pin connectorNot listed

Process control trainers and process panels

The PC logging column shows only what each product page states.

ProductProduct codeProcessMain partsSupply and safetyPC logging
Temperature Process Control TrainerJA-DAIAPC-9616Temperature: closed-loop water heating bench5 L insulated vessel, 500 W heater, temperature probe, PID controller with readout, recirculation pump230 V AC, 50 Hz for the 500 W configuration; high-limit protection on the heaterUSB logging as an option
Level Process Control TrainerJA-DAIAPC-9617Level5 L clear process tank, 10 L sump, low-voltage pump, level transmitter, PID controller, electric valve or pump-speed control230 V AC, 50 Hz; no compressed air neededBuilt-in USB or Ethernet logging interface and software; host PC not included
Illuminated Process Panel for Steam Injection in Heavy Oil ProductionJA-DAIAPC-9614Steam injection in heavy oil production (display)A1-size colour diagram, sequenced LEDs, power, start and reset switches, fault and status lights; tabletop or roll stand, optional wall bracketIsolated 24 V DC controls from a 230 V AC, 50 Hz adapter; electronic simulation, no steam and no pressurised partsNo PC logging
Illuminated Process Panel for Crude Palm Oil Production SimulationJA-DAIAPC-9615Crude palm oil production (simulation display)A1-size colour diagram, sequenced LEDs, alarm lights, step/auto, start, stop and reset; tabletop stand, optional wall fixture24 V DC from a 230 V AC, 50 Hz adapter; heating and motion simulated by lightsNo PC logging

How to choose PLC and process control equipment

  • To start PLC programming, choose the Programmable Logic Controller Trainer (JA-DAIAPC-9610). It has a Siemens S7-1200 CPU 1214C with 14 digital inputs, 10 transistor outputs and 2 analogue inputs, STEP 7 Basic software and a student experiment manual.
  • For project work with analogue signals and an operator panel, choose the Industrial PLC System (JA-DAIAPC-9611). It adds an SM 1234 module, for 6 analogue inputs and 2 analogue outputs in all, and a 7-inch PROFINET HMI panel.
  • To give students equipment to control, add the six application modules (JA-DAIAPC-9612), from motor start-stop to pneumatic cylinder sequencing, or the Conveyor System Trainer (JA-DAIAPC-9613) for sorting tasks. Mains loads and actuators on the modules are simulated.
  • For closed-loop control, choose the Temperature (JA-DAIAPC-9616) or Level (JA-DAIAPC-9617) Process Control Trainer. The level trainer has built-in USB or Ethernet logging, and the temperature trainer offers USB logging as an option. Neither needs compressed air.
  • To explain a whole plant to a class, the illuminated process panels (JA-DAIAPC-9614 and JA-DAIAPC-9615) show the flow on an A1-size colour diagram. They run on 24 V DC from a 230 V AC adapter and are electronic simulations only.
  • Match the I/O before ordering. The Conveyor System Trainer needs about 7 to 14 digital inputs and 5 to 6 digital outputs, and the PLC trainer has 14 digital inputs and 10 digital outputs.

Practicals and teaching tasks covered

TaskProducts used
Writing and testing ladder programs with latching, timers and countersProgrammable Logic Controller Trainer or Industrial PLC System
Programming a PLC to sort items on a conveyorConveyor System Trainer
Solving programming challenges on PLC-controlled equipmentProgrammable Logic Controller Trainer Modular Application Modules with Programmable Logic Controller Trainer
Running a closed temperature loop and adjusting the controller settingsTemperature Process Control Trainer
Holding a tank level at its setpoint and studying the loop responseLevel Process Control Trainer
Explaining the stages of an oil or palm oil process to a classIlluminated Process Panel for Steam Injection in Heavy Oil Production or Illuminated Process Panel for Crude Palm Oil Production Simulation
Logging a level run to a PC and plotting the responseLevel Process Control Trainer

Who uses these trainers

Instrumentation, electrical and chemical engineering departments, polytechnics and industrial training centres use these items in automation and process control courses. The illuminated panels show oil and palm oil production processes for classroom teaching.

Ordering PLC and process control trainers

Quote the product code of each item. The PLC trainer, the industrial PLC panel, the level trainer and the 500 W temperature trainer run on 230 V AC, 50 Hz mains. The illuminated panels run on 24 V DC from a 230 V AC, 50 Hz adapter. Only the pneumatic version of the conveyor trainer needs compressed air. For the industrial PLC panel, say whether you need the software licence and a programming PC, which are separate options; the level trainer comes without a host PC. Send the list through our contact page.

Automation and electronics ranges related to process control

Process control and PLC trainers belong to the Electronics Lab Equipments range from JaincoLab, an electronics lab equipment manufacturer in India.

RangeWhat it covers
Electrical Motor ControlA motor control circuit trainer, a motor generator system and sectioned motors
Wiring, Distribution and ProtectionElectrical installation, circuit fault and electrical machine trainers
Electrical TechnologyElectrical measurement, transformer and metering, and appliance repair trainers
Lighting and Building Control SystemsSecurity and fire alarm trainers and a DDC control training system
Variac DimmerstatsSingle phase and three phase variacs in panel and portable types
Digital Electronics TrainerLogic training boards for gates, flip-flops, counters, converters, multiplexers and decoders
Breadboard TrainersBreadboard circuit labs, digital and analog labs, and logic trainers
Power Electronics TrainersSCR, triac and UJT trainers, thyristor converters and motor speed control
Electronic FundamentalsBasic electricity and electronics trainers, an electricity lab, an operational amplifier trainer and a biomedical instrumentation trainer
Automotive Electrical Trainers and ComponentsAutomotive electrical trainers, ignition and diesel preheating demonstrators, wiper units, a starter motor, an alternator and an air bag trainer
Analog Electronics TrainerTraining boards for diodes, transistors, amplifiers, oscillators, filters and bridges
OscilloscopesDual trace oscilloscopes, an oscilloscope with digital readout and a frequency counter
Digital Storage OscilloscopesDigital storage oscilloscopes, including dual channel and four channel models
Signal GeneratorsFunction generators, an AM and FM function generator and an RF signal generator
Communication TrainerAmplitude, frequency, pulse and phase modulation trainers, multiplexing and transmission line trainers

Frequently Asked Questions

What do the P, I and D terms do in a process controller?
Proportional action responds to the present error. Integral action removes the steady offset that proportional control alone leaves. Derivative action reacts to how fast the error is changing, which reduces overshoot. Level and temperature loops on a trainer are usually tuned with P and I first.

What is the difference between direct and reverse acting control?
A direct-acting controller raises its output when the process variable rises above the setpoint. A reverse-acting controller lowers its output instead. A heating loop is reverse acting: when the temperature goes too high, the heater power must fall.

Why are stop buttons wired as normally closed contacts to a PLC?
A normally closed stop button holds the input on while the circuit is healthy. If the button is pressed or a wire breaks, the input goes off and the program stops the machine. A normally open stop button would fail unsafe, because a broken wire would go unnoticed.

Is a PLC simulator enough, or do students need a physical trainer?
Simulation software is good for learning ladder logic, but students also need real inputs and outputs. Wiring sensors, push buttons and motors on a trainer teaches I/O addressing, wiring faults and safety that a simulator cannot show.

Should a PLC trainer order include the programming cable and software licence?
Ask for both in your enquiry. The PLC trainer page names STEP 7 Basic in TIA Portal and an Ethernet cable to the PC. The industrial PLC panel lists its software licence and a programming PC as separate options. Give the number of PCs the software must run on, and send the details through our contact page.

Should a PLC or process control tender ask for a list of experiments?
Yes. Ask for the list of experiments each trainer supports and the manual that covers them. The PLC trainer page lists a student experiment manual, each application module has its own exercise manual, and the level trainer lists step-by-step material. Comparing these with your syllabus shows whether a trainer fits the course.

For a quotation, list the items with their product codes and the number of sets you need, and send it through our contact page. For tender or project supply, see our tenders page.

Programmable Logic Controller Trainer

Programmable Logic Controller Trainer

Product Code : JA-DAIAPC-9610

Bench PLC trainer with a Siemens SIMATIC S7-1200 CPU 1214C: 14 digital inputs, 10 transistor outputs and 2 analogue inputs, 24 V DC supply, switches, indicators, protected terminals, STEP 7 Basic software and a student experiment manual.

View Details
Industrial PLC System

Industrial PLC System

Product Code : JA-DAIAPC-9611

Industrial PLC panel with a Siemens S7-1200 CPU 1214C and SM 1234 module: 14 digital inputs, 10 digital outputs, 6 analogue inputs and 2 analogue outputs, 24 V DC supply, protected terminals, Ethernet and a 7-inch PROFINET HMI.

View Details
Programmable Logic Controller Trainer Modular Application Modules

Programmable Logic Controller Trainer Modular Application Modules

Product Code : JA-DAIAPC-9612

Six interchangeable application modules for the PLC trainers: Motor/Conveyor Start-Stop, Forward/Reverse Interlock, Traffic Lights, Tank Level and Pump, Object Sorting and Pneumatic Cylinder Sequencing. 24 V DC I/O, keyed connectors, one manual each.

View Details
Conveyor System Trainer

Conveyor System Trainer

Product Code : JA-DAIAPC-9613

PLC conveyor sorting trainer. A 24 V DC belt conveyor with inductive, optical and colour sensors and pushers that sort items into chutes, with I/O brought out for wiring to a PLC trainer.

View Details
Illuminated Process Panel for Steam Injection in Heavy Oil Production

Illuminated Process Panel for Steam Injection in Heavy Oil Production

Product Code : JA-DAIAPC-9614

Illuminated process panel of steam injection in heavy oil production. A1-size colour diagram with microprocessor-controlled LEDs lighting each stage in turn, 24 V DC controls and a tabletop or roll-stand mount. Electronic simulation, no pressurised steam.

View Details
Illuminated Process Panel for Crude Palm Oil Production Simulation

Illuminated Process Panel for Crude Palm Oil Production Simulation

Product Code : JA-DAIAPC-9615

Illuminated process panel of crude palm oil production. A1-size colour diagram from fruit reception to oil storage, with a nut and fibre stream, sequenced LEDs, alarm lights, step/auto controls and a 24 V DC supply from a 230 V AC adapter.

View Details
Temperature Process Control Trainer

Temperature Process Control Trainer

Product Code : JA-DAIAPC-9616

Temperature process control trainer on a vertical front panel. Closed-loop water heating bench with a 5 L insulated vessel, 500 W heater, 3-wire Pt100 probe, PID controller with readout, recirculation pump and high-limit protection. Optional USB logging.

View Details
Level Process Control Trainer

Level Process Control Trainer

Product Code : JA-DAIAPC-9617

Level process control trainer on a vertical panel with a large-format process diagram: 5 L clear process tank, 10 L sump, low-voltage recirculating pump, level transmitter, PID controller, electric actuator and USB or Ethernet logging.

View Details

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us