Microprocessor Flame Photometer Manufacturer,Supplier and Exporter in India
Product Code : JA-MFP-2227
The Microprocessor Flame Photometer (SKU JA-MFP-2227) determines sodium, potassium, calcium and lithium by flame emission and shows results directly in ppm and meq on a 5-digit LED display. This flame photometer for laboratory use calibrates at three points with curve-fitting software. The sample is aspirated, mixed with air and LPG and sprayed into the flame, and a narrow-band filter passes each element line to the detector. It is supplied by JaincoLab.
Specifications
Ranges are Na 0.1 to 100 ppm, K 0.1 to 100 ppm, Ca 15 to 100 ppm and Li 0.5 to 100 ppm, with 0.1 ppm sensitivity and accuracy of ±1% up to 40 ppm and ±2% above 40 ppm.
| Product | Microprocessor Flame Photometer |
| SKU | JA-MFP-2227 |
| Ranges (ppm) | Na 0.1-100; K 0.1-100; Ca 15-100; Li 0.5-100 |
| meq/l ranges | Listed for diluted samples (1:100 and 1:2 dilution) |
| Sensitivity | 0.1 ppm |
| Accuracy | ±1% up to 40 ppm; ±2% above 40 ppm |
| Calibration | 3-point, curve-fitting software |
| Readout | 5-digit red 7-segment LED |
| Flame system | LPG and dry oil-free air; axial flow atomiser; stainless steel burner |
| Detector | Silicon photodiode |
| Filters | Narrow-band interference |
| Power | 230 V ±10% AC, 50 Hz |
| Main unit | 365 x 245 x 220 mm approx.; 7.5 kg approx. |
| Compressor unit | Oil-free mini compressor with pressure regulator |
| Combustion gas | LPG, controlled by precision regulator |
Applications of the flame photometer for laboratory
Three-point calibration with curve fitting suits routine sodium and potassium work, where results are wanted directly in ppm or meq without a separate calculation.
- Sodium and potassium determination in soil testing laboratories
- Na, K, Ca and Li estimation in water and fertiliser analysis
- Instrumental analysis practicals in B.Sc, M.Sc and B.Pharm laboratories
- Teaching and training in emission-based elemental analysis
Scope of supply and ordering
The listing covers the main unit and the oil-free compressor unit with pressure regulator. Filters for Ca and Li and spare parts are confirmed on the quotation; LPG is arranged locally. Accessories, spares and quantities are confirmed on the quotation.
Minimum order quantity, lead time and packing are confirmed on each quotation for the filters required, number of units and the delivery destination. JaincoLab supplies single units and sets for soil testing, college and industrial laboratories.
Frequently asked questions
Which elements can it measure?
Sodium, potassium, calcium and lithium.
How is it calibrated?
At three points, using curve-fitting software.
In which units are results shown?
Directly in ppm and meq on a 5-digit LED display.
Related products
- Microprocessor Flame Photometer
- Digital Flame Photometer
- Digital Fluorometer
- Digital Conductivity Meter
Digital and 5-point models are listed in the JaincoLab flame photometer range.
Request a quote
To order the Microprocessor Flame Photometer (JA-MFP-2227), send the elements needed, quantity and delivery destination through the JaincoLab contact page or email [email protected], quoting SKU JA-MFP-2227. Institutions and contractors buying under a tender can also reach us via the tenders page.
