Series and Parallel Configuration Pumps Manufacturer,Supplier and Exporter in India
Product Code : JA-FMAHLE-9997
The Series and Parallel Configuration Pumps trainer (SKU JA-FMAHLE-9997), supplied by JaincoLab, shows how two identical centrifugal pumps behave when connected in series and in parallel. Ball valves switch between the two layouts, a transparent intake tank with overflow gives a constant suction head, and manometers read the pressure at the inlet and outlet of each pump. This series and parallel pumps rig delivers up to 21 L/min and 12 m of head.
Specifications
The pump trainer is specified by two centrifugal pumps of 370 W each, a 13 litre tank, PVC pipes, a maximum flow of 21 L/min and a maximum head of 12 m, with outlet pressure ranges of 0 to 2.5 bar and inlet ranges of -1 to 1.5 bar.
| Product | Series and Parallel Configuration Pumps |
| SKU | JA-FMAHLE-9997 |
| Pumps | 2 identical centrifugal pumps, 370 W power consumption each |
| Max. flow rate | 21 L/min |
| Max. head | 12 m |
| Intake tank | Transparent, 13 L, overflow for constant suction head |
| Configuration | Series or parallel, selected with ball valves |
| Outlet pressure | 3 manometers, 0 - 2.5 bar |
| Inlet pressure | 2 manometers, -1 to 1.5 bar |
| Pipes | PVC pipes and connections |
Experiments with the series and parallel pumps rig
The trainer is used to plot the head-flow curve of one pump and compare it with the combined curves of two pumps in series, which add head, and in parallel, which add flow.
- Characteristic curve of a single centrifugal pump
- Two pumps in series
- Two pumps in parallel
- Operating point with a system curve
Scope of supply and ordering
The listing covers the Series and Parallel Configuration Pumps trainer with two pumps, tank, valves, manometers and pipework. Flow measurement is by the base module or supply it is used with, confirmed on the quotation. Accessories, spares and quantities are confirmed on the quotation.
MOQ, lead time and packing are confirmed on each quotation for the quantity and the delivery destination. Single trainers and complete fluid mechanics laboratories for engineering colleges, polytechnics and TVET institutes, including tender orders, are supplied.
Frequently asked questions
How many pumps are fitted?
Two identical centrifugal pumps of 370 W each.
How are series and parallel selected?
With ball valves in the pipework.
What head and flow are possible?
Up to 12 m head and 21 L/min flow.
Related products
See the complete fluid mechanics lab equipment range from JaincoLab for pumps, hydraulics and flow measurement.
Request a quote
For a quotation on the Series and Parallel Configuration Pumps trainer, send the quantity, any accessories needed and the delivery destination through the JaincoLab contact page or email [email protected] with SKU JA-FMAHLE-9997. Tender and project enquiries can be sent through the tenders page.
